Skip to content

MPCTRACKER 0.1.0

Latest

Choose a tag to compare

@jeffwebb-to jeffwebb-to released this 10 Nov 07:56

First release of MPCTRACKER, a pattern tracker for the Akai MPC Sample that runs from an SD card.

It has eight tracks and 64 sample slots, and it uses the ProTracker effect column. It loads WAV files and 4 to 8 channel .mod files, saves songs to the card, and starts with a short VHS style intro that any pad skips. The README has the full list of controls.

Installing

  1. Read the Safety section of the README, save the project that is open on the sampler and back up the card.
  2. Unzip mpctracker-v0.1.0-sd-card.zip and copy the autorun and tracker folders to the root of the SD card. This replaces any autorun folder that is already on the card.
  3. Put WAV files in tracker/samples, or browse to samples that are already on the card.
  4. Insert the card. The tracker starts a few seconds after the sampler has booted.
  5. Hold SHIFT and press STOP to quit back to the sampler. Take the card out and power cycle for a normal boot.

Notes

This was developed against the emulator on firmware 1.3.0.12. It starts and plays sound on a real unit, but most of the hardware testing is still to do, so expect rough edges. It never touches the sampler's internal storage and it only writes inside the tracker folder on the card.

The zip has no demo song. A first run plays a built-in drum kit and groove. Copy a .mod file into tracker/songs before the first start and it opens that instead.

Still to come are sampling from the inputs, block copy and paste, a fill tool, naming songs on the device, a view of all eight tracks at once, and MIDI.

SHA-256 of the zip: f42ab51ecc7c829ed667e0b46e2d4330170781643131bbb40d92cb1a89e50277