Skip to content

Releases

TubeEqBtw 1.0.0

Choose a tag to compare

@jelly-comet jelly-comet released this 20 Nov 22:16

TubeEqBtw 1.0: a passive program EQ with a tube stage, broad and gentle curves for a mix, drums, bass or a voice, and the low boost and cut that make the kick trick.

  • The network's own curve: solved from its circuit at every setting, within 0.05 dB of a reference model, and played with no latency.
  • The unit's knobs: LOW BOOST and LOW ATTEN at 20, 30, 60 or 100 Hz (both at once: the kick trick), HIGH BOOST at 3 to 16 kHz with its BANDWIDTH, and HIGH ATTEN from 5, 10 or 20 kHz.
  • DRIVE pushes the tube pair up to +18 dB while the level stays, its fader glowing as the tube rounds the peaks. EVEN sets the pair's balance, from matched to one half alone.
  • AUTO GAIN holds the loudness as the curve changes it, so a boost doesn't win just by being louder.
  • CHANNELS: Stereo, Mid, Side, or M/S with the lows on the mid and the highs on the side.
  • The display: the curve heard, each band alone and the output's spectrum, with rings that move the knobs; hold a ring to hear only where its band works.
  • OVERSAMPLING 1x (no latency), 2x or 4x (43 or 50 samples) for the tube at high DRIVE.
  • Presets: six built in beside Default, and your own.
  • 0.82 % of a CPU core at the defaults, stereo at 48 kHz. Needs a CPU with AVX2.

Install: see INSTALL.txt in the archive or the README. How to use it: the manual.