Skip to content

Releases

MegaX 0.1.1

Choose a tag to compare

@johansmolinski johansmolinski released this 06 Nov 08:57

A bug-fix release of MegaX 0.1, the MiSTer Sharp X68000 core (Puu-san's X68000 core) on the MEGA65. MEGA65 R6 only.

Fixes

  • A possible hang at start-up. A part of the core's memory cache (MiSTer's cacheext) watched the CPU clock as if it were data, sampled with a second clock whose edges fall at the same moments. Whether that worked depended on the chip's placement and timing; when it did not, the X68000 stopped before its first picture. 0.1 happened to work on our board; if 0.1 does not start on yours, try 0.1.1.
  • The long reset. A long press of the reset button (1.5 s, the framework reset) left the power LED blue and the core hanging. It now restarts the X68000 like a short press.

Everything else is as in 0.1.

Install

  1. Flash MegaX-0.1.1-R6.cor into a core slot (hold No Scroll while switching the MEGA65 on), or load MegaX-0.1.1-R6.bit through JTAG.
  2. Make a folder /megax on the SD card and put MiSTer's boot.rom in it (1 MB: Sharp's IPL and CGROM, not part of MegaX), together with your disk images.
  3. Start the core. The menu (HELP key) mounts the images. The settings file /megax/megaxcfg is created on the first start and remembers the images and the settings.

Details in the README and doc/history.md. Licence: GPLv3.

MegaX 0.1

Choose a tag to compare

@johansmolinski johansmolinski released this 03 Nov 20:09

The first release of MegaX, the MiSTer Sharp X68000 core (Puu-san's X68000 core) on the MEGA65. MEGA65 R6 only.

Install

  1. Flash MegaX-0.1-R6.cor into a core slot (hold No Scroll while switching the MEGA65 on), or load MegaX-0.1-R6.bit through JTAG.
  2. Make a folder /megax on the SD card and put MiSTer's boot.rom in it (1 MB: Sharp's IPL and CGROM, not part of MegaX), together with your disk images.
  3. Start the core. The menu (HELP key) mounts the images. The settings file /megax/megaxcfg is created on the first start and remembers the images and the settings.

What works (tested on the hardware)

  • Human68k 3.02 from DIM floppy, SASI and SxSI hard disk images; games such as TwinBee, Dracula and Super Street Fighter II.
  • XDF/DIM/HDM floppies in two drives; one SASI (.HDF) and up to four SxSI (.HDS) hard disk images, up to 2 GB each (a 2 GB image mounts in about 2 s). The X68000 waits until every image is mounted, and resets when the menu closes after a hard disk change.
  • Keyboard in MiSTer's layout, an Amiga mouse in port 1, Atari-style joysticks (second buttons need an active adapter).
  • HDMI (720p 60/50 Hz) and VGA, all of the X68000's video modes (15, 24 and 31 kHz, interlaced).
  • Sound (YM2151 and ADPCM), the 68000 at 10 or 20 MHz.

Built but not yet tested on the hardware: D88 images with write-back, SRAM load/save. Not in 0.1: MIDI, the "Visible Memory" option.

Details in the README and doc/history.md. Licence: GPLv3.