Skip to content

Glimmervoid v0.49.0

Choose a tag to compare

@johncwaters johncwaters released this 01 Nov 01:17
· 1735 commits to main since this release

Added

  • Zoom into shown files on the card. In the Shown viewer, pinch on a phone, or use Ctrl or Cmd with the scroll wheel or a trackpad pinch on desktop, to zoom an image, video or HTML page up to 8x around your fingers or pointer. A zoomed page stays clickable and scrollable. The rest of the dashboard stays at its normal size. Drag or scroll to move around a zoomed file, and double-tap or double-click an image to switch between fit and 2x; a video keeps its own double-click for fullscreen. Zoom out, Fit and Zoom in buttons sit next to the caption with the current zoom percent beside them. Each file opens fitted, and switching files resets the zoom.

  • A new mark, and status icons that move. Glimmervoid's mark is now four corner brackets around a small diamond light. It replaces the play triangle in the favicon, the site nav and the loading screen. The favicon keeps the mark when a session needs you and turns its light amber, or red for a failure. The loading screen shows the mark scanning while the dashboard connects, then the mark spins once like a vault dial, the brackets clamp in, the light comes on and the mark bursts away to show the dashboard; it no longer shows a flying animal. Session status icons for the live states are now diamonds: Working is a small solid diamond that sends out one ping for each burst of terminal output and stays lit for the whole turn, Monitoring is an eye that glances left and right, Starting is a ring of brackets that spins up and blurs at top speed, a session that has ended shows a closed outline, and one not started yet shows the unlit brackets. Needs input, Complete, Failed and Idle keep their question mark, check, X and pause bars. When a session changes state its icon now animates to the next one in under half a second, with the color blending between the two, and nothing around the icon moves. With reduced motion on, icons change instantly and the loading screen skips its animation.

  • Desktop tabs show the same icons as the phone. Every view tab in the desktop header now leads with the line icon the phone bar and More menu use, so Focus, Boards, Settings and the rest look the same on every device. The Glimmervoid name in the header now carries the new diamond mark instead of the play triangle.

  • Boards has its own button on the phone. The phone bottom bar now reads Focus, Terminal, Boards, More, so a board is one tap away instead of inside More, and More no longer lists it. Every bottom bar button and More menu item now draws a line icon instead of a text symbol, and the Focus icon is now a viewfinder framing a glimmer star.

  • Claude Code, Codex and Kimi Code agents learn Glimmervoid commands when they apply. A Claude Code session now gets one line next to a tool result naming the Glimmervoid command that fits: show after a Write, Edit or shell call names an image, video or HTML file, spawn after the agent starts an in-process subagent, push after a git push fails, settings when a call touches ~/.glimmervoid/config.json, and review after gh pr review. Each line appears at most once per conversation, never for a command the session already ran, and never for one its limits refuse. Glimmervoid now also receives Claude's Write, Edit, Agent and failed Bash tool calls through its local hook, which adds about 2 ms to each. A Codex session gets the show line after a shell command names such a file; Codex's shell hook now runs in the background, so it no longer holds up each shell call, and the line reaches Codex with its next model request. A Kimi Code session, whose tool hooks cannot carry text back, gets the spawn line with its next prompt after it starts an in-process subagent.

  • Walk a code review from the board. A board with a code session shows a Not on the board panel listing the files that session changed that no ref on the board covers; click one to open it in the session's review sidebar. Boxes and units whose refs touch a file the review tab calls worth a look carry an amber marker, and a unit whose status disagrees with the code session changes is outlined amber. Select an element with refs and use open in review in the properties panel to jump to that file in the review sidebar.

  • Plan units carry a status checked against the code. A unit is planned, building or landed; set it with glimmervoid whiteboard plan status <board> <unit> <status> or from the Status field in the properties panel, and plan show and the board print it. Glimmervoid checks the mark against the code session's changes: a planned unit whose ref files already changed, or a landed unit whose ref files are unchanged or still uncommitted, comes back as a warning on the agent's put and in get --layout. get --layout also lists the changed files no ref on the board covers, and the referenced files the review tab calls worth a look.

  • Board elements can point at code. A box or unit takes up to 8 refs (path, path#L12 or path#L12-L30), and any line or note takes one ref. Refs resolve against the board's code session worktree, which is the session that created the board, or else the first session that connects; switch it from the Code session field in the properties panel. When an agent puts a ref that names a missing file, runs past the end of the file, or leaves the worktree, the put still lands and returns a warning; glimmervoid whiteboard get --layout and render repeat those warnings. A file outside the worktree is never read. An operator note with a ref names it in the agent's next prompt. Edit refs, line refs and note refs from the properties panel.

  • Shown files open on the session card. Each card header now has Terminal and Shown tabs. Shown is dimmed until an agent shows a file, and a badge on its corner counts the files that arrived since you last opened it, so the header never shifts when it clears; the same count shows next to the session in the roster. The Shown tab flips the card to a viewer of the newest file, with previous and next arrows, the Left and Right keys, a caption with "N of M", Open full size, and a strip of every shown file oldest to newest. Clicking a chip in the terminal opens the viewer on that file. A new file never switches the card away from the terminal. On a phone only the Shown icon sits in the top bar; tap TERMINAL in the bottom bar to go back to the terminal, and Remove session moves from the X into the ... menu. The Shown button, its dot and the full-screen viewer are gone.

  • Boxes on a board say what a change does to them. A box can be marked added (green dashed outline), removed (red dashed, faded, title struck through) or relabeled, which shows its old title struck through above the new one; a relabeled box needs its old title in was. The legend lists each mark in use. Set them from an agent's put or the Change field in the properties panel. This replaces the ghost flag, which boards no longer take.

  • Shown files get small thumbnails. When an agent shows an image or a video, Glimmervoid now makes a small WebP thumbnail (a video's first frame for videos) and the chip in the terminal loads that instead of the full file, which could be up to 200 MB. A file the thumbnailer cannot read shows its kind label instead. Glimmervoid now depends on sharp and ffmpeg-static to make them.

  • Merge tells you when it could not push. When Merge lands a session on main but origin refuses the push, or origin's main moved on in the meantime, a warning now says the work is on your local main and not on origin yet, and what to do next. Before, the Review tab showed the same empty "No changes yet" as a merge that reached origin.

  • Wire boxes by dragging from a dot: hovering a box on a board shows a dot in the middle of each side. Drag from a dot onto another box to wire the two, with a dashed line following the cursor and the box under it lit up. Dropping on empty space or back on the same box adds nothing, and two boxes already wired that way are not wired again. The wire button still wires two selected boxes. Phones show no dots.

  • A properties panel edits what you select on a board. Select one box, wire, frame or panel and a panel in the top right of the board shows its fields: a box's title, shape, column, lane, decision outputs and styled lines; a wire's label, tone, dashed and return styles, sides and decision output; a frame's title and loop mark; a panel's title and lines. With nothing selected it edits the board's title, caption and legend. Each change saves on its own and can be undone.

  • Draw on a board with tools, and undo your edits. The board tool bar has select, box, decision, panel and wire tools, also on the keys V, R, D, P and A while the board has focus. Pick box, decision or panel, then click the board to place one where you clicked and type its title; the tool goes back to select after each placement. The wire tool drags from any part of a box to another box. Cmd+Z (Ctrl+Z) undoes your own last board edit from anywhere in the board view, including right after a change in the properties panel or tool bar, and Shift+Cmd+Z (Shift+Ctrl+Z) redoes it, up to 100 steps per board, in order however fast you press; a text field keeps its own text undo. A note brought back by undo keeps who wrote it and who resolved it; if an agent has since changed what you edited and the undo no longer fits, it says so and drops that step. The box button no longer opens a dialog, and the wire button no longer wires two selected boxes: use the wire tool.

  • Box lines have styles, boards get side panels, and the legend explains wires. A box line can be code, a bullet item, a numbered step (counting through each run) or a kv pair with a bold key. A new panel element holds side notes such as prior art in a column of its own to the right of the board, and wires route around it. The legend under the board now lists each wire style in use, such as failure paths, optional and return wires, and a board op with legend renames an entry or adds one.

  • Boards can draw a decision with named exits. A box with shape: "decision" and a list of outputs draws a pointed header with one labeled row per output, and a wire that names fromOutput leaves from that row, so each branch of a choice starts at its own exit instead of all wires bunching on one side. A put refuses a wire from an output the decision does not have, and outputs on a plain box.

  • Board wires find their own way around boxes. Wires on a board now route around every box wherever it sits, not only through the gaps between columns, so a box placed beside another or dragged off the grid still gets clean right-angle wires. A wire can name the side it leaves or enters by (fromSide, toSide), a back wire draws as a dashed return edge that loops around the outside of the flow, and a frame marked loop shows a repeat badge. A put now also warns when boxes overlap, a box covers a frame title, a side has more wires than fit, a wire bends more than six times, or a board has more wires than one routing pass can place, in which case the rest are drawn as straight dog-legs.

  • Boards are a grid of columns and lane rows, and boxes can sit off the grid. Each lane on a board is now its own labeled row band, so a box lands in a column and lane cell instead of every lane sharing one stack. A box can also sit beside another box (near, on any side) or at a point, with no column at all. A columns op can carry boxes along with a move map when it renames or drops a column, instead of refusing until each box was moved by hand.

  • Agents can see the boards they draw. glimmervoid whiteboard get <board> --layout prints where every box, frame, note and wire landed, with the layout warnings, and glimmervoid whiteboard render <board> --out board.svg writes the board to an SVG file drawn the same way the dashboard draws it. glimmervoid whiteboard put <board> --file ops.json reads the ops from a file, so a large put no longer has to fit on the command line.

  • Board wires follow a dragged box: dragging a box used to leave its wires behind until you let go. They now re-route around the board as the box moves, and where they sit when you let go is where they stay. When an agent or another tab changes the board mid-drag, the drag carries on over the new board.

  • Plans on whiteboards: a session can lay out units of work on any board, in dependency order, with glimmervoid whiteboard plan add, plan after and plan show. A unit is any size, from one ticket to a whole pull request. It can come after other units, and it can link to another board that holds its detail. plan show numbers the units in order, and units that can run in parallel share a number, as 2a and 2b. A dependency cycle is refused with the loop it would make. Deleting a linked board unlinks its units and tells the sessions connected to them. The board's free drawing is untouched.

  • Plan band on the board canvas: a board with units shows them in a band above its free drawing, one column per step, with an arrow for each dependency. The unit button adds a unit from the dashboard, optionally linked to another board, and clicking open linked board on a unit opens that board.

  • glimmervoid why: point it at a line, as glimmervoid why src/app.ts:42, or at a commit sha, and it names the session that made that commit: its name, agent, task, when it committed, and the prompt you gave it just before. Glimmervoid now records each commit a session with its own worktree makes, including the Coherence journal commit made on Merge. The record stays in your Glimmervoid folder and nothing is written into the repository. A commit rebased cleanly or promoted onto main still resolves to its session. A line whose commit no session made says so. If there are no records for the repository at all, for example after moving the checkout or with a different --config, it says that instead and shows where it looked. Commits made before this version are not recorded.

  • Session worktrees start with dependencies on macOS. When a session starts in a worktree without node_modules, new or resumed, and the main checkout's node_modules matches the worktree's package-lock.json or pnpm-lock.yaml, Glimmervoid clones it into the worktree before the agent starts, so tools like Coherence work from the first prompt without an install. The clone is copy-on-write on APFS: it takes seconds and almost no disk, and an install inside the worktree never touches the main checkout. Workspace packages and multi-repo workspace members get their own node_modules too, except a package whose install cannot be matched to its own lockfile. Nothing is cloned when the install is out of date, it links outside the repository (npm link or a file: dependency), the checkout is not on APFS, or the worktree is on another volume, and the dashboard header shows a worktree warning saying why. On Linux and Windows, worktrees start without node_modules, as before. Turn it off with worktreeCloneDependencies: false in config.json.

Changed

  • Linked pull requests are readable in the session menu. Link pull request in the session menu is now Pull requests, and its dialog lists each linked pull request on its own row with its status icon, owner/repo#number, title and stage, such as Checks failing, instead of a bare #number chip. Tap a row to show it in Reviews; the x at its end still unlinks it.

  • Restart sits near the bottom of the session menu. In the ... menu on a session, Restart now sits second from the bottom in amber, just above Remove session, which is now red, so neither is the first thing under your thumb.

  • Radar on the phone reads as separate cards. Each error is now its own bordered card with a chevron on the right, so you can tell where one ends and the next begins and that it can be tapped. Tapping one turns its chevron down and opens its details inside the same card, outlined in the accent color, with the full title shown once instead of twice.

  • Phone settings line up across every section. Switch descriptions and status notes now use the full row width, number fields end at the same edge whatever their unit, and the Telegram test and Delete my data buttons run full width like the rest.

  • Coherence's Structure reading stops failing on this repo. The pinned @posthog/coherence moves from 1.8.0 to 1.12.0. On 1.8.0 one TypeScript server error sank the whole reading, so a session's start and every stop after an edit cold-loaded a 1.6 GB TypeScript server for about a minute and kept nothing. On 1.12.0 the file the server cannot answer is named and the rest of the reading is kept, so an unchanged tree skips the reading and a one-file edit takes about 8 s. It adds web-tree-sitter as a development dependency.

  • Phone settings toggles line up and rows stop jumping. Each switch now sits beside its setting's title instead of on its own line below the description, and the line below it that holds the restore-default button and the save status keeps its space, so a row no longer grows or shrinks after you change it.

  • Session menu items drop their trailing dots. Restart, Edit repositories, Link pull request and Connect board no longer end in ..., on desktop and phone.

  • Telemetry counts command hints. Two new events, command_hint_shown and command_hint_followed, carry only which Glimmervoid command an agent was pointed at and which kind of agent, never the tool call, so the maintainers can tell which one-time hints actually help. GLIMMERVOID_TELEMETRY=0 and Settings > Privacy turn them off with the rest.

  • glimmervoid --help says when to use each session command. Every line under Inside a Glimmervoid session now ends with when the command fits, such as show after making a screenshot or HTML page you should see, so an agent reading help picks the right command instead of only learning what each one does.

  • The Glimmervoid start line now arrives with the first prompt for every agent. Claude Code and Codex used to receive it as a launch argument (--append-system-prompt, developer_instructions), which Glimmervoid skipped whenever your own launch arguments or Codex config.toml set one, so those sessions never learned Glimmervoid was there. Every Claude Code, Codex and Kimi Code session now gets it with its first prompt, and again after /clear, whatever you set.

  • The open session is quieter on the phone Board: the row of the session you last opened kept a purple outline that looked like it needed you. On phones it now keeps only its raised background and bold name. The desktop Focus rail is unchanged.

  • Settings is calmer and lines up. Every control sits in one column on the right, and on/off settings are switches. The page title says whether its settings apply to this browser or this machine, and a row only carries a tag when it differs or when the change waits for new sessions or a restart. Reset shows only on a setting you have changed, and the # link only when you hover the row. Every description is now one short sentence, and docs/configuration.md follows it. Experimental sections and settings carry an EXPERIMENTAL tag in the menu and on the page, and an experimental page opens with a caution line. Tab order is a compact list: drag a row, or use its up and down arrows. A failed update now says in plain words where it stopped, and that your current version is still running when it is, with the build log behind Show details.

  • Focus rail rows name their linked boards and pull requests. A session's connected boards show by title and its pull requests by number on their own line under the task, instead of a row of identical "Board" chips mixed in with status, and status like PARKED keeps its own line. The session you have focused lists its links one per line, with each pull request's title and stage and each board's queued edits, up to five, with the rest on hover. Phone Board rows work the same way, with the list on the session you last opened.

  • Usage follows Claude's move to a weekly-only limit. Anthropic is removing the 5-hour limit from Ultra (formerly Max 20x) in stages. The Usage tab now shows a Claude 5-hour meter only while Claude Code itself still reports one, and no longer estimates one from local transcripts: the "This 5-hour window, Claude" card on the overview is gone, the Overhead 5-hour row and the Usage tab's warning colour follow only the reported window, and the reported weekly window keeps its meter. When one agent hits its limit, the suggestion of another agent to switch to now weighs each agent's tightest reported window, 5-hour or weekly.

  • The Boards view header is one row. Board tabs, the board's version, connected sessions and the toolbar now share a single line above the canvas instead of three, so the board gets more room. The open board's name shows on its selected tab rather than as a separate heading.

Fixed

  • A shell session looks like a shell. In the Focus rail and on the phone Board, a shell session now shows a terminal icon in a muted color, and SHELL in its hover text, in place of the yellow pause icon that made it look like an idle agent session.
  • A removed session no longer lingers on the phone. A session removed while the phone was asleep or offline now disappears from the dashboard as soon as it reconnects, instead of staying listed until a page refresh.
  • The session menu fits on a phone. The session actions menu ran off the left edge of a phone screen. Its items now show their names only, without the grey line under each, on desktop too.
  • Rendering a board no longer hides changes from the agent. glimmervoid whiteboard render and glimmervoid whiteboard get --layout used to mark the board read without printing what others changed, so an operator edit made just before a render never reached the agent's next get or next prompt. Both now leave the board unread.
  • The Review tab's branch line stays current. It used to read "Base branch: no upstream" when a session's worktree was still being set up as you opened it, and it kept its old ahead and behind counts after a Merge. It now checks again once the worktree is ready and after every Merge.
  • Dropping a file over 15 MB on a session says so. The upload used to fail with "HTTP 502" when the dashboard reached Glimmervoid through a proxy or port forward, because the server cut the connection before replying. It now replies "file is larger than 15mb" straight away, and glimmervoid show over its limit gets its own message instead of a reset. Each refused upload also leaves an [upload] line in the server log naming the session, the reason and the size.