Skip to content

Releases

MIDI Muppet Multi 4btn 1.0

Choose a tag to compare

@jonsolberg jonsolberg released this 17 Nov 23:48

The first release of MIDI Muppet Multi 4btn: a four button Arduino MIDI foot switch that you set up from your browser, built on MIDI Muppet HX by Matthias Wientapper.

Open the web editor – no download needed.

What's in it

  • Web editor: installs the firmware through the Arduino bootloader (Nano with the old or new bootloader, Pro Mini 5 V and 3.3 V), then lets you pick a short and a long press action for every switch and save it to the pedal over USB. Works in Chrome, Edge and Opera on a computer, and in Chrome on Android with a USB OTG cable.
  • Actions: Program Change, Control Change, CC toggle and momentary, next/previous program, plus ready-made actions for the Line 6 HX Stomp, BOSS RC-500 and Wampler Terraform. The HX Stomp profile makes switches 1 and 2 work exactly like the original MIDI Muppet HX.
  • Original two button MIDI Muppet HX: the same firmware and editor work with it.
  • LED: flash on send, light while held or off, optional faint red idle glow, adjustable brightness, common cathode and common anode LEDs.
  • Fixed sketches for the HX Stomp, RC-500 and Terraform, for those who prefer the Arduino IDE.

Files

File | For -- | -- midi-muppet-editor.html | The web editor as a single file, to use offline in Chrome, Edge or Opera midi_muppet_4btn_config-atmega168-16mhz.hex | Nano / Pro Mini 5 V with ATmega168 midi_muppet_4btn_config-atmega328p-16mhz.hex | Nano / Pro Mini 5 V with ATmega328P midi_muppet_4btn_config-atmega168-8mhz.hex | Pro Mini 3.3 V with ATmega168 midi_muppet_4btn_config-atmega328p-8mhz.hex | Pro Mini 3.3 V with ATmega328P

The editor installs the right firmware for you; the .hex files are only needed if you flash with another tool, such as avrdude.

Licensed under GPL v3. Code from MIDI Muppet HX is used under the BSD 3-Clause License.

The first release of MIDI Muppet Multi 4btn: a four button Arduino MIDI foot switch that you set up from your browser, built on [MIDI Muppet HX](https://github.com/mattzzw/midi_muppet_hx_2btn) by Matthias Wientapper.

Open the web editor – no download needed.

What's in it
Web editor: installs the firmware through the Arduino bootloader (Nano with the old or new bootloader, Pro Mini 5 V and 3.3 V), then lets you pick a short and a long press action for every switch and save it to the pedal over USB. Works in Chrome, Edge and Opera on a computer, and in Chrome on Android with a USB OTG cable.
Actions: Program Change, Control Change, CC toggle and momentary, next/previous program, plus ready-made actions for the Line 6 HX Stomp, BOSS RC-500 and Wampler Terraform. The HX Stomp profile makes switches 1 and 2 work exactly like the original MIDI Muppet HX.
Original two button MIDI Muppet HX: the same firmware and editor work with it.
LED: flash on send, light while held or off, optional faint red idle glow, adjustable brightness, common cathode and common anode LEDs.
Fixed sketches for the HX Stomp, RC-500 and Terraform, for those who prefer the Arduino IDE.
Files
File For
midi-muppet-editor.html The web editor as a single file, to use offline in Chrome, Edge or Opera
midi_muppet_4btn_config-atmega168-16mhz.hex Nano / Pro Mini 5 V with ATmega168
midi_muppet_4btn_config-atmega328p-16mhz.hex Nano / Pro Mini 5 V with ATmega328P
midi_muppet_4btn_config-atmega168-8mhz.hex Pro Mini 3.3 V with ATmega168
midi_muppet_4btn_config-atmega328p-8mhz.hex Pro Mini 3.3 V with ATmega328P

The editor installs the right firmware for you; the .hex files are only needed if you flash with another tool, such as avrdude.

Licensed under GPL v3. Code from MIDI Muppet HX is used under the BSD 3-Clause License.