Skip to content

Releases

StickTime Pi 0.2.11

Choose a tag to compare

@github-actions github-actions released this 26 Oct 16:56
b78dd72

StickTime Pi 0.2.11

What's new

  • StickTime 1.10.0's tracks with scenery. The game's new tracks have props, rails and decals (format 3, and
    format 4 for bigger ones). The Tracks page lists them under On the Pi when the game on the Pi is 1.10.0
    or newer; with an older game it says "the game can't read it", as that game doesn't list them. The Pi's guard
    for track slots knows them too: it reads them as the game does (format 4 up to 10000 bytes, structure kinds
    1-9, the scenery after the structures left to the game's own checks), hides one the game would crash on, and
    keeps a listed one as it was loaded if its file goes bad or away mid-game, all of it (a big track's last good
    copy was cut at 6000 bytes before).
  • The Tracks page follows the game the Pi runs: with StickTime BW it lists the formats BW reads (1, and 3 from
    1.10.0 on), with the Lite none (it has no custom tracks).
  • Game updates with bigger gallery tracks. The game's track gallery may now hold a track of up to 10000
    characters (format 4); before, one over 6000 made the Pi keep its old gallery.
  • The track editor on the page is the game's own: after the game update it places props, rails and decals.

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.11, then StickTime 1.10.0 (in that order: an
older StickTime Pi runs it too, but lists its tracks with scenery as unreadable). Your settings, saves and
tracks stay as they are. A new image comes with StickTime 1.10.0.

From 0.1.0 or 0.2.0: those updaters can't install updates (see the 0.2.1 notes): flash this image once.
Copy sticktime.txt, sticktime/music and, from sticktime/sd/SCRIPTS/TOOLS, StickTime.dat,
StickTimeBW.dat, StickTimeLite/data.txt, StickTimeTracks and StickTimeGhosts to your PC first, and
put them back after flashing (the WiFi password isn't in sticktime.txt any more after a boot: type it
again).

New install

Flash sticktime-pi-0.2.11.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.11
app version: 0.2.11
app binary: sticktime-pi sha256 863068a8b627bf3aa20442091a6095d08d0e2a252abe5ee7d4b7c45cc3bcb96b, sticktime-gpu sha256 07c806dc530d763e842e1c6a75ef4c813bf702cbab76286f5ef9e502ea0f6f82
game: StickTime 1.10.0 (StickTime-1.10.0-sdcard.zip, sha256 85b1b0b9b1da8332ea670d9b5c06b1b5b312dab77f0d617ccd4ac2102b8f31a3)
game editions: color, B&W, Lite
editor page: yes, 9d06c1c94bb63df9aecdabc0b4dc9c88d71726beb56cf9c048dbfe6851c79473
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606902384 bytes xz, sha256 1cc9cec14ee7a50cb6b2affcc03565327724ba6273ac4095d003f9fecd4aa097
built: 2026-10-26T16:46:16Z on x86_64

StickTime Pi 0.2.10

Choose a tag to compare

@github-actions github-actions released this 23 Oct 12:26
771f503

StickTime Pi 0.2.10

What's new

  • Release the WiFi module for the PC. Status → Inputs → Release module asks the module to stop streaming
    to the Pi (joystick_end). An ELRS module then broadcasts again, so the PC app finds it by itself (ELRS /
    Crossfire WiFi Joystick for Windows 3.4 or for Linux 1.1.0, or any other app). The Pi stops listening until you
    press Connect, or until StickTime Pi starts again (a restart of the game, an update, a reboot). The page says
    what the module answered.
  • Shutdown and reboot release it too. Before StickTime Pi exits (shutdown or reboot from the web page, an app
    update, the service stopping) it releases the module, waiting for its answer 1.5 s at most. Unplugging the Pi
    sends nothing: an ELRS module then streams on until its WiFi is switched off and on.
  • Before, nothing ever stopped the module's stream, and an ELRS module that streams never broadcasts: the PC app
    could take it over only with its IP address set.
  • Crossfire is not sent the stop: it broadcasts while it streams, so the PC app finds it anyway.
  • The same WiFi joystick code as the Linux app 1.1.0, and the Windows app 3.4 follows the same rules (R14 in
    all three).

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.10. The game stays at StickTime 1.9.0. Your
settings stay as they are.

New install

Flash sticktime-pi-0.2.10.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.10
app version: 0.2.10
app binary: sticktime-pi sha256 cae49f311ce1211accfa2834d339cf0e2dd1a5eb3e8f2e7f74f1464a26c861c7, sticktime-gpu sha256 07c806dc530d763e842e1c6a75ef4c813bf702cbab76286f5ef9e502ea0f6f82
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606873244 bytes xz, sha256 17e69e42a56564f5e081b5ef342c469d2251fcbdc56d563ef6bc09651e7898df
built: 2026-10-23T12:12:10Z on x86_64

StickTime Pi 0.2.9

Choose a tag to compare

@github-actions github-actions released this 22 Oct 21:27
73abe88

StickTime Pi 0.2.9

What's new

  • WiFi joystick: a channel count setting, and a new rate or count reaches a streaming module. Web page →
    Sticks: Packet interval (wifi_interval_us, 4000 = 250 Hz, the default; the box now suggests 1000 Hz
    down to 50 Hz) and the new Channel count (wifi_channels, 4-16, default 16). An ELRS module only takes a
    new rate or count when its stream starts, so a change saved while it streams now stops its stream and starts
    it again (the sticks pause for a moment). Before, a new packet interval reached the module only at its next
    start. Fewer channels leave the higher ones empty: keep the pause switch and the stick mapping within them.
  • The restart goes out at once when the module surely is ELRS (its broadcast was seen, or it sends other than
    16 channels). A module that sends 16 channels and whose broadcast the Pi hasn't seen may be Crossfire: the Pi
    first waits up to 20 s for a Crossfire broadcast. A restart counts only when the module accepted both the stop
    and the start (an answer with an error doesn't count). Else, while the module keeps streaming, the Pi tries
    the stop and start 3 times in all, 5 s apart, then says in the log (System → Log) that it gave up. If the
    stream stops first, the Pi restarts the module once more when its stream is back.
  • Crossfire always sends 16 channels about 90 times a second: these settings don't change it, and the Pi
    never stops the stream of a module it knows as Crossfire by its broadcast (the log says so once). If
    broadcasts can't reach the Pi (wifi_module_ip set because the router blocks them), it can't tell Crossfire
    from ELRS: after 20 s it treats the module as ELRS, so a change of these settings, or a Channel count below
    16, then sends the Crossfire module the stop and the start too.
  • A module still streaming what another app asked for (the PC app, another Pi) is restarted once with your
    values when it sends another channel count. A different rate alone is kept: switch the module's WiFi off and
    on, or save a new value on the web page, to get yours.
  • The same WiFi joystick code as the Linux app. The protocol part is now shared with ExpressLRS / TBS
    Crossfire WiFi Joystick for Linux 1.0.0, and the Windows app follows the same rules from version 3.3.
    Unchanged: in flight the game pauses 0.5 s after the WiFi sticks stop, and the Pi lets go of the module after
    3 s.
  • wifi_module_ip no longer takes 0.0.0.0 (it names no module).

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.9. The game stays at StickTime 1.9.0. Your
settings stay as they are: Packet interval keeps your value, Channel count starts at 16 (what the Pi always
asked for).

New install

Flash sticktime-pi-0.2.9.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.9
app version: 0.2.9
app binary: sticktime-pi sha256 a9b87d5c901ff03ba2c682794de40ae07feee2be6fa8054b15ef89b4215faefe, sticktime-gpu sha256 07c806dc530d763e842e1c6a75ef4c813bf702cbab76286f5ef9e502ea0f6f82
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606863860 bytes xz, sha256 8aadccf8fad74ec460f60b8f0a58bd6dec9fb999628ceb206143e1d697052add
built: 2026-10-22T21:20:06Z on x86_64

StickTime Pi 0.2.8

Choose a tag to compare

@github-actions github-actions released this 21 Oct 10:18

StickTime Pi 0.2.8

What's new

  • Latency says what it measures. The Status page's latency tile reads "stick to video out": the figure
    ends where the picture leaves the Pi (the VTX or the HDMI port). Your goggles or screen add their own delay
    on top, which differs by model: measure it rather than guess, as the user guide ("Latency and frame times")
    says.
  • README: the printed case in the pictures (the case with the monitor and the radio, the open case in the
    wiring section) and today's VTX control page with a Tramp VTX found on one pin.
  • Everything from 0.2.7: VTX control on one pin working in the running game.

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.8. The game stays at StickTime 1.9.0.

New install

Flash sticktime-pi-0.2.8.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.8
app version: 0.2.8
app binary: sticktime-pi sha256 660c9127f8d073c59bc6c021e0376c3f3bf96053841cb5d64b6f89d93d50d570, sticktime-gpu sha256 07c806dc530d763e842e1c6a75ef4c813bf702cbab76286f5ef9e502ea0f6f82
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606849496 bytes xz, sha256 cc267c2a018f141282b7d04b774cf2e78bb544255fe07f87e598c73ebe3cc6df
built: 2026-10-21T10:04:42Z on x86_64

StickTime Pi 0.2.7

Choose a tag to compare

@github-actions github-actions released this 21 Oct 09:11

StickTime Pi 0.2.7

What's new

  • VTX control on one pin works in the running game. It had worked only with the game stopped: the drawing
    threads preempted the pin's bit timing (every frame went out milliseconds late, a Tramp VTX answered 4 frames
    in 1700), and switching the pin for every frame tore down and rebuilt the kernel's edge interrupt (up to 7 ms,
    while the VTX was already answering). Now the sender runs above the drawing threads, writes the pin through the
    Pi's GPIO registers directly (the interrupt stays armed, its thread raised too), and repeats a frame only when
    an edge went out more than half a bit late. The VTX is found at once and set; the page's Line timing shows
    the edges' lateness, the repeats, the pin's switch times and the sender's own edges seen back.
  • What one pin can't do: while the game draws, the kernel stalls the sender now and then for a tenth of a
    millisecond (a whole bit at Tramp's 9600 baud), so about half of the exchanges with a Tramp VTX fail and are
    repeated; the VTX stays set, and it is declared lost only after ten unanswered polls. For a link that never
    misses, the user guide now recommends the two-wire UART mode (one more resistor at the Pi's header; the VTX still
    sees one wire). docs/RESEARCH.md has the measurements.
  • The not-found message says when the Pi's own timing, not the wire, is the problem; GET /api/vtx has
    stats.tx_late; the line's log line comes at most every 30 s.

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.7. The game stays at StickTime 1.9.0.

New install

Flash sticktime-pi-0.2.7.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.7
app version: 0.2.7
app binary: sticktime-pi sha256 205677eb552e0c61ee60e902463c654012d9fcc80a90b8da11be58b6500800ea, sticktime-gpu sha256 07c806dc530d763e842e1c6a75ef4c813bf702cbab76286f5ef9e502ea0f6f82
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606847672 bytes xz, sha256 1c4566240b9dd06ec67e725b225ba530404d95373eb339e0c857e1780c3bc0da
built: 2026-10-21T09:01:34Z on x86_64

StickTime Pi 0.2.6

Choose a tag to compare

@github-actions github-actions released this 19 Oct 20:05

StickTime Pi 0.2.6

What's new

  • Interlaced without the flicker. The new flicker filter (web page → Video → Flicker filter,
    av_flicker) blends each line with the lines above and below it, so a thin line or text lands in both
    fields of 480i / 576i and stops flickering. Full (the default) stops it completely at a little vertical
    softness, as a GameCube does in 480i; Light keeps more detail; Off is interlaced as before. It also
    softens the picture's top and bottom edges into the border.
  • Picture detail for interlaced too. av_detail = high (the default) now also draws interlaced 480i /
    576i with twice the lines and twice the width: the flicker filter averages the line pairs on the way out
    and the display scales the width. The smoothest picture StickTime Pi makes, and the most work (four times
    the pixels of progressive): on NTSC a Pi 4 holds 60 fps in most views with Drawing on Multi-core, the
    heaviest (the menu's dark overlay, dense tracks) can dip; PAL draws a fifth more pixels. It runs the Pi warm
    (close to the 80 °C where it slows itself down): give it a heatsink or a small fan, or set Picture detail to
    Normal. A card from 0.2.5 on interlaced has av_detail = high in its settings already, so it gets this
    with the update.
  • Lines keep their weight at double detail. The game draws 1 pixel lines (the floor grid, outlines); at
    double detail they used to fade to a quarter when scaled down. They are now drawn 2 pixels wide there.
  • Drawing on several cores (web page → Video → Drawing; it switches at once):
    • Multi-core (the default) draws each frame on three of the Pi's four cores, the fourth left to the
      sound: exactly the same picture as one core, in about half the time (double detail on a Pi 4: the menu
      18 → 9 ms a frame, a flight 7.5 → 4.3 ms). On interlaced composite each band of the frame also makes
      its part of the copy out through the flicker filter while it is still in the CPU's cache.
    • GPU draws on the graphics chip (OpenGL ES 2, for the Pi 3, 4 and 5; a new helper program,
      bin/sticktime-gpu). It frees the cores, but on a Pi 4 it is slower than
      Multi-core at double detail, and edges may differ by a pixel. When it can't start it draws on the cores.
    • One core is how 0.2.5 drew.
  • Faster drawing everywhere: blending without division, in code the compiler turns into vector
    instructions; level lines drawn as runs; the frame drawn in bands small enough for the CPU's cache.
  • Restart doesn't hang any more. The web page's Restart, and settings that need a restart, start the game
    again at once. Before, each restart in a boot waited longer than the last (up to 30 s of black, which
    looked like a hang).
  • Status page: where the latency comes from. Frame times shows the wait for the refresh with its safety
    margin, and a note says how latency adds up: the game, the copy, the wait (with the screen's blanking gap
    between two pictures) and half a refresh while the picture goes out line by line. The user guide explains
    it ("Latency and frame times"). GET /api/status has the parts (wait_ms, margin_ms, budget_ms,
    event_lag_ms, late_on_time).
  • Bluetooth off is said on the page. With bluetooth = off the Sticks page says that no Bluetooth device
    can connect (the ELRS BLE joystick, gamepads, keyboards), and warns when the stick source is Bluetooth.
  • The Game page's Script card says when a switch of editions happens: with StickTime (color) in the game's
    main menu, with the BW and Lite editions at once.
  • A Pi with fewer working cores (maxcpus= in cmdline.txt) gets a fitting share of them; the game's loop
    goes to the last core when it has no core 3.

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.6. The game stays at StickTime 1.9.0.

From 0.1.0 or 0.2.0: those updaters can't install updates (see the 0.2.1 notes): flash this image once.
Copy sticktime.txt, sticktime/music and, from sticktime/sd/SCRIPTS/TOOLS, StickTime.dat,
StickTimeBW.dat, StickTimeLite/data.txt, StickTimeTracks and StickTimeGhosts to your PC first, and
put them back after flashing (the WiFi password isn't in sticktime.txt any more after a boot: type it
again).

New install

Flash sticktime-pi-0.2.6.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.6
app version: 0.2.6
app binary: sticktime-pi sha256 d154d04879b2cc5f55e56359a310d43c69d7824d8d3bb028727b63e766392d67, sticktime-gpu sha256 07c806dc530d763e842e1c6a75ef4c813bf702cbab76286f5ef9e502ea0f6f82
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606837792 bytes xz, sha256 3f352f40c3e3b09f1735d11fdfcd617b0ac01d1aba7c22cf719d85ad8b46119b
built: 2026-10-19T19:58:08Z on x86_64

StickTime Pi 0.2.5

Choose a tag to compare

@github-actions github-actions released this 19 Oct 14:35

StickTime Pi 0.2.5

What's new

  • A sharper, flicker-free picture in goggles. The AV output is now progressive (240p / 288p) by
    default: thin lines and text no longer flicker as they do on interlaced 480i / 576i. And the new
    av_detail = high (the default) draws the game with twice the lines (NTSC 4:3: 640x480 instead of
    320x240) and lets the Pi's display hardware scale it down: sharper text, smoother edges of gates and trees,
    for a few ms more work per frame (a Pi 4 keeps a steady 60 fps). av_detail = normal draws 240p / 288p as
    before. A card from before 0.2.5 keeps its av_mode = interlaced: to try progressive, web page → Video →
    Composite lines → Progressive (the app restarts; no reboot).
  • Tracks page: a track in StickTime 1.8.0's bigger format (format 2: up to 48 gates and 64 structures,
    e.g. from the gallery) no longer shows as "the game can't read it" under On the Pi. The game read it
    all along; only the page checked for the older format. The Pi's guard for track slots knows format 2 now
    too: a big track the game has listed is kept as it was loaded if its file goes bad or away mid-game (as
    format 1 tracks always were), instead of reaching the game unchecked.
  • Status page: power warnings work again. On today's Raspberry Pi OS (kernel 6.12) the page couldn't
    read the Pi's under-voltage and throttling flags, so a weak power supply went unnoticed. It now asks the
    firmware directly, as vcgencmd get_throttled does.
  • The web server and the game's saves no longer run on the game's own CPU core only (they got what the game
    left over there): they use the other cores now, so the web page answers faster while you fly.
  • The log's start line names the render size once (it said it twice).

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.5. The game stays at StickTime 1.9.0.

From 0.1.0 or 0.2.0: those updaters can't install updates (see the 0.2.1 notes): flash this image once.
Copy sticktime.txt, sticktime/music and, from sticktime/sd/SCRIPTS/TOOLS, StickTime.dat,
StickTimeBW.dat, StickTimeLite/data.txt, StickTimeTracks and StickTimeGhosts to your PC first, and
put them back after flashing (the WiFi password isn't in sticktime.txt any more after a boot: type it
again).

New install

Flash sticktime-pi-0.2.5.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.5
app version: 0.2.5
app binary: sticktime-pi sha256 2fa42d2622716573100c5ca21e2412a9f1592bfa5a59d3f57159a3561e0c0932
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606765332 bytes xz, sha256 21830ddd96e9c1fe3d159c9e861d570f3f92bc5a101a9513b4e0848fd4ab21f5
built: 2026-10-19T14:20:55Z on x86_64

StickTime Pi 0.2.4

Choose a tag to compare

@github-actions github-actions released this 19 Oct 10:26

StickTime Pi 0.2.4

What's new

  • Ready for StickTime 1.9.0 and its Colors (this image ships it). On the AV output to your goggles:
    • the game's Settings → Colors is Auto, which is the natural Summer look there (Classic on
      HDMI). Summer, Evening and Overcast have a sky that fades into the haze at the horizon, duller grass and
      calmer colors: easier on the eyes, and clean on analog video.
    • the text (lap, time, speed...) has a black outline, like Betaflight's OSD, readable over sky and grass.
  • Smoother motion at 60 Hz: the Pi gives the game each frame's exact display time. Until now the game
    only had its 10 ms clock, so at NTSC's 60 Hz each step of the simulation was 0.6 ms off on average, at times
    3 ms: a slight stutter in fast turns. (PAL's 50 Hz was already even.)
  • Web page: a password field (WiFi, hotspot, GitHub token) opened with Change right after a save no
    longer closes by itself when the Pi's answer to the save comes in. And on the VTX card, a pick (pit mode,
    channel, power) no longer flips back for a moment when a status refresh from before it comes in late.
  • User guide: Easy on the eyes in goggles: Colors, av_mode = progressive (no flicker of thin lines and
    text), NTSC or PAL, and ntsc vs ntsc-j when blacks look grey.

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.4, then Check again to install StickTime
1.9.0. If you copied a StickTime.lua of your own onto the card (a test build), automatic updates leave it
as it is: install the game once from the Updates page (it keeps a copy of yours in sticktime/backup/).

From 0.1.0 or 0.2.0: those updaters can't install updates (see the 0.2.1 notes): flash this image once.
Copy sticktime.txt, sticktime/music and, from sticktime/sd/SCRIPTS/TOOLS, StickTime.dat,
StickTimeBW.dat, StickTimeLite/data.txt, StickTimeTracks and StickTimeGhosts to your PC first, and
put them back after flashing (the WiFi password isn't in sticktime.txt any more after a boot: type it
again).

New install

Flash sticktime-pi-0.2.4.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.4
app version: 0.2.4
app binary: sticktime-pi sha256 119d23eced401d12bae9d2238ec4a2c4ad06d3ee3e95cda1a3b7300e2ecab2a8
game: StickTime 1.9.0 (StickTime-1.9.0-sdcard.zip, sha256 8fcbe967cf1a02c254bba0e6b5880198073914ae4123272b9babc69c4188ecd6)
game editions: color, B&W, Lite
editor page: yes, 70451a198be01e903a0aba863e7fe356d66896caa998c67237b6eb3860bc9edb
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606753556 bytes xz, sha256 f9bf1bb930c680a745fcbc2af2ba3c8543c133c146f5a5827e1eb015dc482b3a
built: 2026-10-19T10:17:05Z on x86_64

StickTime Pi 0.2.3

Choose a tag to compare

@github-actions github-actions released this 18 Oct 00:13

StickTime Pi 0.2.3

What's new

  • Ready for StickTime 1.8.0. The new game, its editor and its bigger tracks (up to 48 gates and 64
    structures) all work on the Pi; this image ships StickTime 1.8.0. The fix: the track gallery from the
    StickTime site is accepted again with 1.8.0's bigger tracks (the Stonehenge Bando). 0.2.2 and older
    turned the whole new gallery down, because one of its tracks was longer than the old 1000-character
    limit, and kept showing the old one.
  • keep_logs (sticktime.txt, or web page → System → Keep logs): keeps the Pi's system log
    across restarts, on the SD card (at most 50 MB). Raspberry Pi OS keeps it in memory only, so when the Pi
    stops or restarts by itself, the reason is gone after the restart. With keep_logs = on, read the log of
    the run before the restart over SSH with journalctl -b -1, or attach it to an issue. Off by default;
    it applies at the next boot.

Update from the web page

From 0.2.1 or newer: Updates → Check → install StickTime Pi 0.2.3, then Check again to install StickTime
1.8.0 (the new gallery comes with it). The Updates page says that some system changes apply after a
reboot: keep_logs and the boot setup. Reboot once (System → Reboot).

From 0.1.0 or 0.2.0: those updaters can't install updates (see the 0.2.1 notes): flash this image once.
Copy sticktime.txt, sticktime/music and, from sticktime/sd/SCRIPTS/TOOLS, StickTime.dat,
StickTimeBW.dat, StickTimeLite/data.txt, StickTimeTracks and StickTimeGhosts to your PC first, and
put them back after flashing (the WiFi password isn't in sticktime.txt any more after a boot: type it
again).

New install

Flash sticktime-pi-0.2.3.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.3
app version: 0.2.3
app binary: sticktime-pi sha256 a4546dd867b25e16e3bfb3665d9cdefd4b520f1b25953261e4baa6664d57714b
game: StickTime 1.8.0 (StickTime-1.8.0-sdcard.zip, sha256 964021f05381569c8f7cf687b347ea45c56e85b8df5a745d77fdaa7297cd98f3)
game editions: color, B&W, Lite
editor page: yes, 8300da54c7494c286da042346d3b6fb0b353374acbf90b9c7411f9c21f527437
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606761064 bytes xz, sha256 ec0643cc81f9d19559a1269085989e956ec5cc41c554d1f7dcdfcaf761b5ad46
built: 2026-10-17T23:59:32Z on x86_64

StickTime Pi 0.2.2

Choose a tag to compare

@github-actions github-actions released this 17 Oct 19:14

StickTime Pi 0.2.2

What's new

  • Updates bring the system scripts too. Until now an update from the web page replaced the program and
    the web page only; the Pi's system scripts (the boot setup that applies sticktime.txt, the WiFi, hotspot
    and Bluetooth helpers, the updater itself) changed only with a new SD image. Now every update carries them
    and installs them, and a rollback takes them back too. From here on, fixes like 0.2.1's Bluetooth pairing
    and jack sound reach a running Pi with an update: no reflash.
    • A script is only installed when it matches the release's checksums and compiles; if the updater or the
      boot setup's libraries no longer start afterwards, the previous scripts go back by themselves.
    • The image's own scripts are kept, so rolling back to 0.2.1 or older brings them back exactly.
    • The Bluetooth helper restarts by itself when its files change; when something applies only at the next
      boot (the boot setup, the hotspot), the Updates page says "Some system changes apply after a reboot."
    • Systemd service files and files outside /usr/lib/sticktime still need a new image (they rarely change).
  • The boot setup may take up to 10 minutes before it gives up (it takes seconds on a Pi; only an emulated
    first boot in CI needed more than the old 3 minutes).

Update from the web page

From 0.2.1: Updates → Check → install StickTime Pi 0.2.2. 0.2.1's updater installs the package, and 0.2.2
installs its system scripts itself the first time it starts.

From 0.1.0 or 0.2.0: those updaters can't install updates (see the 0.2.1 notes): flash this image once. Copy
sticktime.txt, sticktime/music and, from sticktime/sd/SCRIPTS/TOOLS, StickTime.dat, StickTimeBW.dat,
StickTimeLite/data.txt, StickTimeTracks and StickTimeGhosts to your PC first, and put them back after
flashing (the WiFi password isn't in sticktime.txt any more after a boot: type it again).

New install

Flash sticktime-pi-0.2.2.img.xz with Raspberry Pi Imager ("Use custom", and No to OS customisation)
or any other SD card writer, then edit sticktime.txt on the card's boot partition from a PC.

StickTime Pi image sticktime-pi-0.2.2
app version: 0.2.2
app binary: sticktime-pi sha256 ac4cbf54fb2562e01e51f94d4d3679010bc3eafaf339d78936983f1829018083
game: StickTime 1.7.2 (StickTime-1.7.2-sdcard.zip, sha256 572d19a844b579e09b6c8072c22cde2a4b545480e9fc644fa39a057d35e47b00)
game editions: color, B&W, Lite
editor page: yes, b70a16c464e72de0d25ef1ef1265f4670bf2b3e122d2d8e65968a0c51e2f3552
base: 2026-04-21-raspios-trixie-arm64-lite.img.xz (sha256 4cd31df026fd82243805a326dc0cafd7383f7e3d30c9413e7044d507aae281e2, kernel 6.12.75)
image: 3229614080 bytes raw, 606757128 bytes xz, sha256 2e25e8b0cada7e183d48837c83cb9a19d2a47d79ed88e89514535fe4e490d6ce
built: 2026-10-17T19:00:36Z on x86_64