Skip to content
This repository was archived by the owner on Aug 21, 2026. It is now read-only.

1) Installation Instructions

docwilco edited this page May 30, 2022 · 3 revisions

Assetto Server Manager Installation Instructions

Hi! Welcome to Assetto Server Manager! We're pretty proud of our tool and we hope you can get it set up OK.

However, if you have any problems, please don't hesitate to ask questions in one of the following places:

We'd also like to ask that you consider donating to help fund the development of Server Manager. We're a two person team who dedicate a lot of our time to make cool things for the community. If you can help out, we'd really appreciate it. You can donate at: https://paypal.me/JustaPenguinUK

Right! With that let's begin setting up the server.

Installation Steps:

  1. Unzip the server-manager.zip to your preferred location.

  2. Open the config.yml file in your favourite editor. This is important, some things do need configuring here.

  3. Read the config.yml file carefully. The most important part of this is the 'steam' section. At the very minimum, you must change the 'install_path' setting. You should make this point to your Assetto Corsa Server install.

    On Windows, this will most likely look something like this:

    C:\Program Files\Steam\SteamApps\common\assettocorsa\server

    But it will vary a bit depending on your Windows installation, so please find your correct path and put it in the config file.

    After configuring this, feel free to read the rest of the configuration file and change things as you see fit. We've tried our best to make the defaults be as sensible as possible, but you can tune things to your liking here.

  4. Run the 'server-manager' executable. On Windows, this will open your browser window. If you're on Linux, you'll need to manually open the URL: http://localhost:8772 in your browser.

  5. Log in to Server Manager. You can do this with the "Login" link underneath the Person icon in the navigation. You'll need the default username and password to get in, they are:

    username: admin
    password: servermanager
    

    When you log in, you will be immediately prompted to change your password. You can add new accounts at any time from the server manager web interface.

Forgotten Password:

If you've forgotten your password, you can set a password_override key in the config.yml. It will change the admin password to be whatever you have specified in plain text. You will then be prompted to change your password on next login.

The default admin user cannot be deleted or have its group changed.

Automatic start on Linux:

If you want the server manager to start automatically when Linux boots, follow these steps. This assumes your version of Linux uses systemd, which is most modern versions.

  1. Create a file called /etc/systemd/system/acsm.service:
     $ sudo editor /etc/systemd/system/acsm.service
    
    Use the following as contents:
    [Unit]
    Description=Assetto Corsa Server Manager service
    After=network.target
    StartLimitIntervalSec=0
    [Service]
    Type=simple
    Restart=always
    RestartSec=1
    KillSignal=SIGINT
    User=ac
    WorkingDirectory=/home/ac/acsm
    Environment=PATH=/home/ac/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
    ExecStart=/home/ac/acsm/server-manager
    
    [Install]
    WantedBy=multi-user.target
    
    Make sure to check/change the following things:
    1. User: set this to the username you want the server manager to run under. Typically this is the same user that you installed everything with. For safety, NEVER use root as the user.
    2. WorkingDirectory: set this to the directory in which the server manager is installed.
    3. Environment: change the /home/ac/bin part to the directory where you've installed steamcmd, if you have.
    4. ExecStart: make sure this is the full absolute path for the binary you want to start. Typically it would be the same directory as used in WorkingDirectory, followed by a / and then either server-manager or assetto-multiserver-manager, depending on whether you use the single server or the multi server.
  2. Reload systemd so that the new file will be picked up:
     $ sudo systemctl daemon-reload
    
  3. Start the service:
     $ sudo systemctl start acsm
    
  4. Check the status of the service:
     $ sudo systemctl status acsm
    
    If you see any errors here, go back to step 1 and double check everything.
  5. Enable the service so that it is started when Linux starts:
     $ sudo systemctl enable acsm
    

Clone this wiki locally