Skip to content

Form Studio 1.0.0

Latest

Choose a tag to compare

@github-actions github-actions released this 18 Nov 19:12
· 3 commits to main since this release

The first public release of Form Studio. Describe a part, and an agent designs it as real CAD: built in an
OpenCascade kernel, checked on the solid, sliced with your own slicer and played back layer by layer before you
print. Open source, for macOS, Windows and Linux.

  • Start from anything. One composer on Home takes words, a photo (with a card, coin or ruler in it the agent estimates sizes), a sketch with real dimensions, a STEP, STL or 3MF part, a PDF drawing or a link. Choose For my printer or Just a 3D model, the printer, and the agent and model right under it, or Start blank with an empty plate.
  • Talk to it like a chat app. Conversations are kept, searchable, pinnable and tied to their design, each with its own agent and model. Use agent apps (Claude Code, Codex, Gemini CLI, Cursor CLI, OpenCode, Qwen Code, GitHub Copilot CLI), model APIs (Anthropic, OpenAI, Gemini, OpenRouter, Mistral, xAI, DeepSeek, Groq), local models (Ollama, LM Studio, llama.cpp) or any provider added by its address.
  • Concepts, then real CAD built in front of you. A new idea comes back as several genuinely different concepts, each real CAD with its size and volume. The agent writes a parametric build123d design, and it grows in the viewport feature by feature. When a number matters, it asks you to measure it and shows where.
  • Proved on the solid. Every revision is checked: one valid solid, the export mesh, walls, overhangs, bridges, plate contact, tip-over, the build volume and fits modelled against your printer. Every number says how it is known: computed, heuristic, modelled, simulated or measured.
  • Assemblies that move. Joints form chains, mates are fits rather than collisions, and every joint is swept through its range for collisions, with Assembled, Exploded and Print layout views and assembly instructions as a PDF.
  • Your slicer, for real. Bambu Studio, OrcaSlicer, PrusaSlicer, SuperSlicer, QIDISlicer, ElegooSlicer and Snapmaker Orca slice every revision with your printer's own presets, on several plates when a design needs them, and the print is played back from the G-code.
  • Every printer you have, compared. Prove › Every printer slices the design for real on each printer set up in each installed slicer, with that printer's own process and filament, and shows the slicer's time and filament and the cost from your prices side by side, with a bar per printer and the fastest, least filament and cheapest marked. A printer whose bed is too small says so; a failed slice says why. Slices are kept per model and presets, so asking again is instant. form compare-printers <project> [--limit N] [--printer ID]; MCP compare_printers.
  • Screw bosses and snap-fit hooks where you click. In Annotate, pick a point on a flat face and choose Feature here…: a screw boss (M2 to M5; the hole for a screw cutting its thread is the ISO tap drill, for a heat-set insert a typical insert hole, for a screw passing through the ISO 273 clearance) or a cantilever snap-fit hook. The boss wall is checked against your nozzle and the hook's strain (1.5·t·y/L²) against an allowable strain as you type. Add to design writes the feature into the design's code and builds a new revision in the kernel; one that does not sit on the part is refused with the reason. form feature <project> boss|snap_hook --at x,y,z --normal x,y,z, --list, --remove; MCP add_feature, remove_feature.
  • Turntable videos. Release › Share › Turntable… (also in the palette and the Tools menu) renders the part turning once from the kernel's mesh, at the frames and camera height you choose, as MP4 (when ffmpeg is installed), a PNG sequence, an animated WebP or a GIF, plays it in the sheet and saves it. form turntable <project> --fmt mp4|png|webp|gif; MCP turntable.
  • Shape it by hand. Measure with snapping, annotate faces and regions with the numbers from the solid, add raised or sunk text on any flat face, set colours and materials per part, and see what changed between two revisions on the solids themselves.
  • Release what you approved. Only a person approves a release. STEP, STL, 3MF, OBJ, GLB and G-code are frozen with SHA-256 hashes and a report of every check and its evidence; Save files… takes them all in one .zip.
  • Set up inside the app. The first start installs what Form Studio needs and pauses only for a sign-in or a download that needs you, all in its own window with no terminal. No example project is added.
  • Everything headless. Every action is a form command that prints JSON, and every agent tool is one of 74 MCP tools, also callable as form tool NAME '{json}'.
  • Design it, not print it. Just a 3D model skips slicing and print checks, and a release holds the formats for CAD, CNC, laser cutting or rendering.

Notes of the development builds before 1.0.0 are in docs/HISTORY.md.

Verify the download

SHA256SUMS lists the SHA-256 of every file attached here. Each app bundle also carries a signed build provenance attestation from the GitHub Actions run that built it:

gh attestation verify FORM-macos-arm64.zip --repo kaizensx/form-studio

form-studio-sbom.spdx.json is the software bill of materials (SPDX) of this release's source tree.