Repository navigation
Releases
Digitakt II All-in-One v0.3.0 Community Beta
Digitakt II All-in-One — experimental community beta
Windows x64 offline builder for your own official Digitakt II OS 1.17. No Elektron firmware is included. No Python, Rust or WSL is needed; the app creates a file only and never connects to or flashes the instrument.
Practical HOW TO — Plaits, Musical WAVE, Déjà Vu and Zoom/Pan · Installation · Recovery
Windows presentation revision r2: corrected title, full feature list, All-in-One ready status, readable credits/source links and invalid-file handling. No firmware or DSP changes.
Included
- 25 optimized Plaits model selections and four DX7 patch banks from Tyler Neely/spacejam.
- Kári’s graphical Plaits UI 2.1, with the duplicate upper DX7 patch name removed and the lower name preserved.
- Musical WAVE V4 / Déjà Vu and One-Shot Zoom & Pan V11.
- Original Elektron intro animation, followed by five seconds of DigiKit legal credits.
Download and source
Download DT2-All-in-One-v0.3.0-beta-Windows-r2.zip and extract it. Choose the official OS 1.17 file, choose a new output filename, then Build. Read the included README/recovery prerequisites before any deliberate installation. The executable is unsigned.
The Windows ZIP includes complete corresponding source, notices and validation. The same source is separately available as DT2-All-in-One-Corresponding-Source-r2.zip. Use this explicit asset, NOT GitHub’s automatically generated source archives of the older research repository. Keep source and notices with redistributed builders; do not redistribute the generated Elektron-containing SYX.
The unnumbered Windows/source ZIPs and SHA256SUMS.txt are the previous presentation revision retained for rollback. Use the r2 ZIPs and SHA256SUMS-r2.txt above. Both builders generate the same firmware.
Validation and limitations
The recurring Plaits trigger click remains. No click fix is claimed. Kári has hardware-confirmed boot/audio/model selection and DX7 UI on the preceding build. This exact upper-label-fix plus credits release image is NOT hardware-tested. Credits passed 1,635 bounded callback/ABI/framebuffer cases; the Windows builder, source/package, HMAC, section and output-identity checks passed. DSP, bootstrap, updater and all non-MAIN sections are byte-identical to the accepted UI-fix baseline. Existing encoding/SHARC boot evidence applies to that unchanged DSP.
DSP engine/track-count limits apply; no 16-track guarantee. Old14 MODEL values/p-locks are incompatible. Exhaustive persistence, modulation and long-session stability are not guaranteed. Earlier Plaits builds have failed normal Transfer updates; have official stock firmware and a physical MIDI-DIN startup-recovery path available.
Credits and license
digikit by Em D - https://github.com/ElekLabs/digikit. Optimized Plaits: Tyler Neely / spacejam, pinned e48d0a2a83f055c549391173247cea02c571927f. Original Plaits/stmlib: Emilie Gillet / Mutable Instruments. Integration, graphics, Musical WAVE and Zoom: Kári. Modified community edition: AGPL-3.0-or-later with DigiKit NOTICE and applicable per-file MIT/runtime notices retained. Additional credits: Bezronczek — Syntakt Firmware Workbench / Déjà Vu behavioral reference; mischa85 — elektron-firmware-tool (MIT). Mutable Instruments’ Marbles is an inspiration, not bundled Marbles code. Full licensing/provenance disclosures are included. Unofficial; not endorsed by Elektron.
Community policy
Free, experimental and as-is. No guaranteed support, requested features, maintenance schedule or future OS compatibility. GitHub Issues for reproducible bugs/community discussion; contributions welcome. Never attach proprietary firmware or private projects.
SHA-256
Windows ZIP: b9759287b746407e35f1c26afa6783c166717c5b3f5c39e7d2e7359534b31b4e
Corresponding source: 52343f98bc042c859965f09be594a2be5b3926241d7844bca7b2b9f0af418621
Required official input: 26c22f6652625ac2cfd47f7ee970d388ed8b6427dae3563c0a6a2f2d334350d5
Generated firmware: 426dd1be5be3d356b5fa26900c729baf555cc16393611c4e0544ebd2d95eec76
Digitakt II Déjà Vu + ONESHOT Zoom v0.2.0 Beta
Digitakt II Déjà Vu + ONESHOT Zoom v0.2.0 Beta
This release adds the hardware-tested ONESHOT waveform Zoom edition for official Digitakt II OS 1.17. OS 1.16 remains supported for Déjà Vu only.
Download builder → Select official stock OS → Build → Install via Elektron Transfer
Supported inputs and verified outputs
| Official stock OS | Edition | Generated SHA-256 |
|---|---|---|
| 1.17 | Déjà Vu | cd553ef6e84d60401b8ac3abc3492b61343ba8a6ac720cf019e15b613cd67b2e |
| 1.17 | Déjà Vu + ONESHOT Zoom | 6163640ce056b2266b57a9b0d3d8b568c6423ac1dfe8c9d079b03519e3bfebd4 |
| 1.16 | Déjà Vu | d9fe67b3778ce5d31aaaa807e6e43ac1929d0f36a10c393adc0a8c590c547835 |
The builder detects the stock version by exact SHA-256, displays it in the GUI, applies only the matching frozen manifest, verifies all six firmware sections and container integrity, and fails closed on every other input. No official or patched Elektron firmware is included.
Hardware status
All three exact outputs have physical Digitakt II validation for normal boot and normal operation. Déjà Vu covers DV-F, DV-T and retrigger. The OS 1.17 Zoom edition covers 1x, 2x and 3.75x ONESHOT waveform detail, panning, and encoder-C controls. This is beta evidence rather than exhaustive long-term regression.
On the ONESHOT SRC waveform page, press encoder C to cycle 1x, 2x, 3.75x and 1x; turn C to pan while zoomed. Zoom requires Déjà Vu and is therefore offered only as the combined OS 1.17 edition.
Before installing
- Download the official stock OS from Elektron Support & Downloads — Digitakt II.
- Read the installation instructions and stock recovery instructions.
- Keep a known-good official stock OS and a physical MIDI interface available.
- The executable is unsigned, so Windows SmartScreen may show an unrecognized-app warning.
- Broad MIDI, sequencer, transport, persistence, and long-duration regression remain incomplete.
This is unofficial firmware and is not affiliated with or endorsed by Elektron.
Digitakt II Déjà Vu v0.1.1 Beta — OS 1.17 Support
Digitakt II Déjà Vu v0.1.1 Beta
This release adds official Digitakt II OS 1.17 support to the standalone Windows builder. OS 1.17 is recommended; the exact OS 1.16 path remains supported and unchanged.
Download builder → Select official stock OS → Build → Install via Elektron Transfer
Supported inputs and verified outputs
| Official stock OS | Stock SHA-256 | Generated V5.1 SHA-256 |
|---|---|---|
| 1.17 | 26c22f6652625ac2cfd47f7ee970d388ed8b6427dae3563c0a6a2f2d334350d5 |
cd553ef6e84d60401b8ac3abc3492b61343ba8a6ac720cf019e15b613cd67b2e |
| 1.16 | 278541e466edcd77d6b3e018a91fb90185932d3c7de224dd3e68294dddf3a9ec |
d9fe67b3778ce5d31aaaa807e6e43ac1929d0f36a10c393adc0a8c590c547835 |
The builder detects the stock version by exact SHA-256, displays it in the GUI, applies only the matching frozen manifest, verifies all six firmware sections and container integrity, and fails closed on every other input. No official or patched Elektron firmware is included.
Hardware status
The exact OS 1.17 output has initial physical Digitakt II validation: normal boot, DV-F modulation, DV-T modulation and retrigger, and normal operation passed with no problems observed. The exact OS 1.16 V5.1 output remains hardware tested. This is beta evidence rather than exhaustive long-term regression.
Before installing
- Download the official stock OS from Elektron Support & Downloads — Digitakt II.
- Read the installation instructions and stock recovery instructions.
- Keep a known-good official stock OS and a physical MIDI interface available.
- The executable is unsigned, so Windows SmartScreen may show an unrecognized-app warning.
- Broad MIDI, sequencer, transport, persistence, and long-duration regression remain incomplete.
This is unofficial firmware and is not affiliated with or endorsed by Elektron.
Digitakt II Déjà Vu v0.1.0 Beta
Digitakt II Déjà Vu v0.1.0 Beta
This beta adds two random-loop waveforms to all three Digitakt II LFOs:
- DV-F: free-running random loop.
- DV-T: random loop whose read position resets on the track trigger.
MODE selects 2, 4, 8, 16, or 32 steps. SPH controls refresh, lock, and reorder behavior. Stock WAVE 0–6 remain available.
Simple Windows workflow
- Download
DT2-DejaVu-Builder-v0.1.0-beta-Windows.zipand extract it. - Run
DT2-DejaVu-Builder.exe. - Select the official Digitakt II OS 1.16
.syxobtained from Elektron Support & Downloads. - Click Build Déjà Vu and wait for the success message.
- Install the generated file manually with Elektron Transfer.
The builder contains no Elektron firmware and performs no USB/MIDI transmission or flashing. It accepts only stock OS 1.16 SHA-256 278541e466edcd77d6b3e018a91fb90185932d3c7de224dd3e68294dddf3a9ec and writes only the exact tested V5.1 result SHA-256 d9fe67b3778ce5d31aaaa807e6e43ac1929d0f36a10c393adc0a8c590c547835.
Windows ZIP SHA-256: 2f666866389c963b2595fb24f77ae37bbb69122bbe41f67dc834f35bc66ed5ab
Builder EXE SHA-256: a5cc8c4e4bf93b2448f893a7db654a1115f6e6c911313d693928ebad73bf00fd
Hardware evidence
V5.1 was generated with the Windows builder and tested on Digitakt II hardware: normal boot, clean DV-F/DV-T labels, audible modulation from both waveforms, DV-T repeat/retrigger behavior, and working stock LFO waveforms were observed.
Broad MIDI, sequencer/transport, save/reload/power-cycle persistence, and long-duration regression remain incomplete. Digitakt II OS 1.16 is the only supported base.
Read before installing
This is unsigned, unofficial firmware. Windows SmartScreen may warn about the unsigned builder. Back up important data and keep official stock OS 1.16 plus a physical MIDI interface available.
This project is not affiliated with or endorsed by Elektron.