Skip to content

v4.9.1

Latest

Choose a tag to compare

@kennss kennss released this 20 Nov 10:47
· 1 commit to main since this release

No zeros where nothing was measured. M3 Max and M3 Ultra (and A18) report only total
memory traffic, not how it divides between CPU, GPU, media and the rest. Those rows used
to read 0 GB/s, so a GPU at 100 % looked like it moved no memory. They now read "—", and
the Media Engine shows "— total only" instead of "idle", because its activity can't be
measured on these chips either. The total is still shown and charted.

For contributors: sscope-cli --chip-report. One command measures your Mac the way a
sensor, power or bandwidth contribution needs it, and saves one zip on your Desktop. It
measures at rest, then E-cores only, every core, the GPU only, and a GPU kernel streaming
memory, each for a minute after a cool-down. It takes about 12 minutes and asks first.
The summary inside shows how much each temperature key rose under each load, and the
memory bandwidth SiliconScope read beside what the GPU timed itself moving. Nothing is
uploaded. The zip has no host name, IP address, serial number or process list. The
procedure is the one @SpencerCurtis worked out by hand for the M3 Ultra
(#93).

Agents unchanged: Mac 1.4.3, Linux 1.5.3.