Repository navigation
Melodee 0.4.0
Melodee 0.4.0 for the Akai MPC Sample: a 16-track groovebox that runs on the MPC in place of the stock app, from the microSD card.
Update
- From 0.2.x or 0.3.0: copy
Melodee-MPC-Sample-v0.4.0.zipto the card, or send it from the web page at http://melodee.local. Melodee asks Update to v0.4.0?, saves, installs and restarts. - From 0.1.0 or a new card: install by hand as in Install: unzip and copy the
autorunfolder to the top level of the card.
Requires an MPC Sample on firmware 1.3.0.12.
Back up Melodee/Projects before you update.
Changed: read this first
- Chop is reworked. See Chop below. The encoder now moves the selected slice's cut instead of selecting a slice: tap a slice's pad or use − / + to select one. Push no longer starts a Manual take. B2 (SNAP) is gone: every cut always lands on a zero crossing.
- Rec Quantize is one press. SHIFT + Pad 10 turns it on or off, as on the MPC. Recorded notes land on the pattern's Q. The REC QUANTIZE page and Settings' Rec grid row are gone.
- A new project has no tracks. The track types open on track 1. On the NEW question, B2 (KIT) starts with the MPC's factory kit on track 1.
- Melodee starts on Full, also after an update. Basic offers every track type.
- Nothing is written to the card's top level. New samples go to
Melodee/Samplesand.syxfiles are read fromMelodee/SysEx. The oldSamplesandSysExfolders at the top are still read. - Push on an MPC drum program in the sample browser opens LOAD KIT instead of replacing the kit at once (see below).
- ERASE + an empty pad on a kit now closes the gap (see below).
- The meter lights step as the stock app's: −24.1, −12.1, −6.1 and −3.1 dBFS, red past −0.1 dBFS.
- The manual is updated for all of this, on GitHub and on the web page at http://melodee.local.
New
Chop
- Manual take with the red pad. Set K3 to Manual. Pad 1 blinks red: tap it and the region plays. The red moves to the next pad; tap it on the next hit to cut there. After pad 16 the pads turn to bank B, up to 64 slices in banks A–D. Tap a lit pad to play again from its slice and redo the cuts after it. A take is one undo step.
- Fix a cut by eye. Tap a slice's pad and turn the encoder: its start moves (its end after K2). The view zooms in while you turn and the slice plays once when you stop. SHIFT + encoder jumps the cut from hit to hit, marked under the waveform.
- PAD BANK steps the pads through the slices, 16 at a time.
- Beats chop by division: 1/16, 1/8, 1/4, 1/2, 1, 2 or 4 bars on SHIFT + K3.
- Cuts you make or move by hand stay when you chop again by type, threshold, division or regions. An automatic cut close to one of yours gives way to it, so no short slivers.
- ERASE + pad joins a slice with the one before. On pad 1 it joins with the next. The pads after move down one. ERASE + CHOP takes every cut out.
- TO PADS asks how the slices play: POLY, MONO (one mute group) or THRU (each plays on to the region's end).
- The chop type, its amount and your hand cuts are saved in the sample's WAV file with its slices, so they are still there after a restart.
Kits
- LOAD KIT. Push on an MPC drum program in the sample browser shows its filled banks and how many pads each has. Pick which of your kit's banks each one fills, or WHOLE KIT. Only the filled pads are loaded; the rest of your kit stays. One undo.
- Close a gap. ERASE + an empty pad moves the pads after it down one, with their notes, through that bank and the next one. To take a pad out and close the gap, press ERASE + that pad twice. The notices say what happened.
Samples
- A sample's note is found when it loads or is recorded. 16 Levels Scale and Chords, MIDI into 16 Levels, Roll's row names and a keygroup track of one sample play from that note instead of C. A chord stab's root is found from its chord.
- Stems BEST (B2): separates up to 16 kHz in two passes, about three times as long. On at first, kept with the settings.
- The sample browser's PREVIEW works on a keygroup track too, and stays on or off after a restart.
Sequencing
- Roll: K2 on marked notes moves their velocities together.
Fixed
- A kept punch ends with its pattern, also with Half Seq, a shorter length, Half Speed or an editor's loop. Punches let go when the transport leaves them.
- Motion and kept punches past a pattern's end stay out on a track at another speed.
- A kit lane of its own length keeps its notes with Seq Record, Note Repeat and Time Correct.
- Stopping before the bar a launched sequence waits for brings its tempo with it.
- The song's clips play their pattern where the song is.
- A track move takes its kept punches and its modulator and macro lanes with it.
- An editor's loop plays the right bars on a track at another speed.
- Clear pattern takes the pattern's Motion with its notes.
- SHIFT + PLAY continues from the right place on a track at another speed.
- A MIDI track's audio no longer clicks on each pad touch and release.
- The auto sampler no longer hears an outside instrument's check notes ringing.