Repository navigation
Melodee 0.5.1 for the Akai MPC Sample: a 16-track groovebox that runs on the MPC in place of the stock app, from the microSD card.
Update
- From 0.2.x to 0.5.0: copy
Melodee-MPC-Sample-v0.5.1.zipto the card, or send it from the web page at http://melodee.local. Melodee asks Update to v0.5.1?, saves, installs and restarts. - From 0.1.0 or a new card: install by hand as in Install: unzip and copy the
autorunfolder to the top level of the card.
Requires an MPC Sample on firmware 1.3.0.12.
Back up Melodee/Projects before you update.
Changed: read this first
- Hold SEQ for the selected track's patterns. On any page, a pad launches that pattern on the selected track only, and more pads in the same hold chain them. SHIFT + pad launches a sequence on every track. While SHIFT is held, the pads and the sheet show the sequences, and SHIFT + more pads chain them. − / + launch the previous / next pattern. A tap of SEQ still opens Sequences.
- Auto chop cuts DRUMS and MUSIC on the beats. A sample with a steady beat is cut on the beats Melodee finds in it: every 1, 2, 4, 8 or 16 beats, or eighths, whichever comes nearest SLICES. No slice is shorter than 80 % of an eighth note, and Auto keeps its cuts that far from your hand cuts. HITS keeps 150 ms between cuts.
New
Chop
- TO PADS writes a pattern of the slices. With the PATTERN card on (the default), TO PADS also writes a pattern with a note for each slice where it falls, so PLAY gives you the loop back on pads you can change. With KIT, each note plays the pad of its sound. The pattern goes into the track's pattern when that is empty, else into the first empty one. Undo takes back the pads and the pattern in one step.
Settings
- USB volume on AUDIO: what a computer records from the MPC over USB-C. Full (the default) sends the mix at full level whatever MAIN VOLUME is set to. Knob follows MAIN VOLUME, as the jacks do.
Fixed
- While a loop or MIDI track uses the mic or the rear inputs, the other input as Input Config's or an audio track's source shows IN USE and is silent, instead of playing the input in use under its name. Sample Record and audio takes refuse with a notice.