Repository navigation
Releases
Releases · kevxngg/monitor-root
Monitor 3.7
What's new
- Diablo Mode on Snapdragon (Adreno) and Exynos: the GPU is now really pinned at its maximum frequency. Before, only the cap was removed, so the GPU could still scale down with load.
- When Diablo Mode ends, or when you press Reset in the GPU settings, the GPU minimum frequency goes back to normal.
Monitor 3.6
What's new
- Diablo Mode now works while the phone is charging. Before, it silently fell back to the Performance profile when plugged in, so the GPU was not pinned. Use the original charger so the phone gets all the power it needs; playing while charging heats the battery more, and the temperature cutoff (battery 46 °C, CPU 95 °C) still protects the phone.
- Diablo Mode keeps the GPU pinned: if the manufacturer's power service undoes the fixed frequency, it is set again within a few seconds.
- GPU: the maximum frequency shown is now the real one the chip can run at (on MediaTek it showed a higher value from a table that is not in use).
- Disk: "Active time" was labelled "Up time" in English and other languages.
- Game mode now detects a game that was already on screen when it started (for example right after the app updates itself in the middle of a session).
- Diablo Mode on Xiaomi/HyperOS: the CPU now really reaches its maximum frequency. The manufacturer's thermal service left its frequency cap in place even after being stopped, so the CPU could stay pinned below the maximum (for example 1.6 GHz instead of 2.0 GHz).
Monitor 3.5
What's new
- While a game is open, the manual CPU controls on the Performance page are locked and say why: game mode is in charge, and changing them by hand used to be undone or to conflict with it.
- With Shizuku, the buttons that need root (ending native processes, starting or stopping system services) are now disabled instead of failing silently.
- The temperature alert now uses the battery temperature for the limit you chose; the processor only triggers it when it is really hot (90 °C). Before, it could fire during normal use.
- Updates are only installed automatically when the file's SHA-256 fingerprint has been checked.
- In right-to-left languages such as Arabic, the back arrow and the chevrons now point the right way.
Monitor 3.4
What's new
- Battery: real capacity and design capacity, remaining charge in mAh, charge cycles, technology and charge type. The charge or discharge rate (% per hour) and the remaining time now appear right away, estimated from the current being drawn, until there is enough history to measure them.
- GPU: memory in use on Mali (MediaTek) and the screen resolution and refresh rate. Long values such as the driver version no longer hide their label.
- Mobile data: carrier, network type (4G, 5G, Wi-Fi calling) and roaming.
- Wi-Fi: band and channel. Disk: used space, file system and data read and written since boot. Memory: free, active, inactive, ZRAM compression and more. CPU: temperature and load average.
- Floating monitor: same typeface as the app and battery level and temperature in every style. The network speed no longer counts VPN or tethering traffic twice, the panel can no longer be resized wider than the screen, and the Transparency setting was inverted (High now really is more transparent).
- Game mode: a game left in the background ends its session after a while (1 minute with Diablo Mode), turning game mode off restores everything reliably, and if Android kills the app in the middle of a game the CPU goes back to normal on the next start.
- Leaving a game no longer turns a temporary limit set by the system (for example from heat) into a permanent CPU limit.
- Diablo Mode turns itself off if no temperature can be read, and does not start if the CPU state could not be saved.
- The battery charge alert no longer repeats on phones with a charge limit.
- Confirmation before suspending a system process and before deleting the usage history. "Remove all" in efficiency mode now really restores the apps' priority.
- Rotating the phone no longer restarts the app. In macOS style, dialogs were shown twice.
- Text fixes: the search box read "Check" in some languages, and other small wording and icon corrections.
Monitor 3.3
What's new
- Diablo Mode: the warning is now shown only the first time you turn it on. Tapping the profile again when it is already selected no longer opens the dialog.
- Changing the performance profile while a game is open now applies right away (before, it only took effect the next time you opened the game, so Diablo Mode could stay on or off until then).
- The Games page now tells you when the phone is charging, because Diablo Mode does not turn on while charging and the Performance profile is used instead.
- More reliable recovery of the thermal control if root is not available at the moment Diablo Mode turns off, or if the app is opened while the mode is starting.
Monitor 3.2
What's new
- Diablo Mode (root only): a new game mode profile that locks the CPU and GPU at their maximum frequency and removes the limits that slow them down with heat (the manufacturer's thermal services, Xiaomi's Joyose and the kernel's passive limits) while your game is open. It asks for confirmation and shows a warning first, and an indicator appears on the floating monitor.
- Built-in safety for Diablo Mode: it turns off automatically if the battery or CPU gets too hot, if the phone starts charging, or when you leave the game. The kernel's critical thermal protection is never touched.
- Redesigned Games page: choose the performance profile applied during the game (the phone decides, less heat and battery use, as it comes from the factory, CPU at maximum, or Diablo Mode). Press and hold a game to remove it from the list.
- The floating monitor now shows the GPU frequency on MediaTek and Mali phones too.
- The project is now in English for everyone. The app still follows your phone's language (11 languages), and a few texts that were not translated now are.
Monitor 3.1
Novedades
- Nuevo monitor flotante: un panel con medidores de CPU, GPU, RAM y temperatura, gráficas, red, almacenamiento y FPS. Tiene cuatro diseños (completo, compacto, gamer y retro), se ajusta de tamaño arrastrando la esquina inferior derecha, y con la esquina superior derecha se minimiza a una burbuja con el logo de la app que se pega al borde de la pantalla.
- Funciona sin root con Shizuku: al abrir la app eliges "Conectar con root" o "Conectar con Shizuku" (se puede cambiar en Configuración). Con Shizuku, Monitor lee procesos, CPU, memoria, red, almacenamiento, batería, temperaturas y FPS, y puede finalizar apps. Lo que necesita cambiar el sistema aparece marcado como "Solo con root".
- Con Shizuku, la batería, las temperaturas y el almacenamiento se leen por caminos alternativos cuando Android bloquea los archivos del sistema.
Correcciones
- Si se perdía la conexión con root o Shizuku, la app se quedaba sin datos hasta cerrarla. Ahora se reconecta sola.
- El modo juego seguía activo con la pantalla bloqueada (rendimiento al máximo en el bolsillo). Ahora se desactiva al apagar la pantalla y se reactiva al volver al juego.
- Con Shizuku, las actualizaciones automáticas fallaban; ahora se instalan bien.
- El monitor flotante podía cerrarse al calcular el almacenamiento, la burbuja quedaba fuera de la pantalla al girarla, y los cambios de diseño o transparencia no se aplicaban hasta reabrirlo.
- Las acciones que solo funcionan con root (servicios del sistema, aplicaciones de arranque, prioridad de procesos) ya no fallan en silencio con Shizuku: aparecen marcadas.
Nota
- La primera vez que abras esta versión verás la pantalla para elegir la conexión. Si usas root, elige "Conectar con root" y listo.
Monitor 3.0
Novedades
- Nuevo estilo de interfaz macOS (Configuración > Estilo de interfaz), inspirado en el Monitor de Actividad: pestañas arriba, barra de totales abajo, lista con filas intercaladas y columnas con scroll lateral, selección en azul, bordes redondeados y tipografía tipo SF Pro. Windows 11 sigue disponible como siempre.
- El tema de la aplicación añade "Negro puro" para pantallas AMOLED.
Notas
- El estilo se elige en Configuración y la app se reinicia para aplicarlo.
Monitor 2.9
Seguridad
- Nueva clave de firma privada. La anterior estaba publicada en el repositorio. Gracias a la rotación de clave de Android, Monitor se actualiza normalmente sin desinstalar. En Android 9 o superior, después de instalar esta versión, el teléfono deja de aceptar actualizaciones firmadas con la clave antigua.
- Las claves ya no están en el código: solo en los Secrets de GitHub.
Monitor 2.8
Mejoras de seguridad
- Antes de instalar una actualización con root, la app comprueba que la APK sea Monitor, esté firmada con la misma clave, sea más nueva y llegue completa e intacta (huella SHA-256 publicada en cada versión). Si algo no coincide, no se instala.
Batería
- La revisión en segundo plano ya no despierta al teléfono cada 5 minutos, y las actualizaciones se buscan como máximo una vez por hora (con la app abierta, como siempre).
- Los ajustes de la CPU, Servicios y Juegos dejan de actualizarse cuando la app está minimizada.
Correcciones
- Si un comando del sistema se quedaba colgado, todas las funciones con root podían bloquearse hasta cerrar la app. Ahora cada comando tiene un límite de 20 segundos y la conexión root se recupera sola.
- Un valor de velocidad inválido podía congelar la app al dibujar las gráficas de disco y red.