Repository navigation
Releases
Diamond Radio ATS Mini v1.0.7 build 8
Diamond Radio ATS Mini 1.0.7 — Build 8
This release adds ATS Mini support to Diamond's USB PC Control and FT8 Live Map website tools, including live FM audio FFT bars, a scrolling audio spectrum/waterfall, receiver controls, and a seek fix.
What's new
ATS Mini USB PC Control
Control the receiver from a desktop computer while its normal screen and physical controls remain available:
- Tune FM and HF frequencies.
- Select AM, LSB, or USB where applicable.
- Adjust volume, mute, bandwidth, tuning step, AGC/ATT, and BFO.
- Use SEEK UP and SEEK DOWN. Fixed a timing bug that could acknowledge a seek command without moving from the original station.
- Open supported CW, RTTY, FT8 + WF, FT4 + WF, and FT2 + WF decoder pages from the computer.
- View live signal level, frequency, mode, RDS information, decoder text, and station data.
FM FFT and live website waterfall
- FM stations now have live audio FFT bars in the PC Control FM view.
- The existing PC Control spectrum and scrolling waterfall now support ATS Mini in FM and HF.
- The radio remains audible and tunable while the website display is active.
- Opening a supported waterfall decoder safely transfers the display feed to that session; returning to the radio restores the ordinary website stream.
- No extra wiring or hardware modification is required.
The website waterfall is the computer's live audio-spectrum view. The separate 3D button for the ATS-25 radio screen is not used on ATS Mini.
FT8 Live Map integration
FT8 + WF and FT4 + WF can send accepted decodes to the existing Diamond FT8 Live Map page for station details, flags, locators, and map display.
How to use PC Control
- Connect the ATS Mini to the computer with a data-capable USB cable.
- Open Diamond Radio PC Control in a desktop browser with Web Serial support, such as Chrome or Edge.
- Click CONNECT, select the ATS Mini USB port, and confirm. Unlike ATS-25, the Mini does not need a PC-connection setting enabled first.
- On an FM station, open the FM view to see the live FFT bars. The WATERFALL card starts automatically after connection.
- Tune or change controls normally. Click DISCONNECT when finished.
How to use FT8 Live Map
- On the ATS Mini, open MENU → DECODER → FT8 + WF or FT4 + WF and start decoding on the desired band.
- Open Diamond FT8 Live Map in Chrome or Edge.
- Click CONNECT and select the same ATS Mini USB port.
- Accepted stations appear in the decode list and on the map as they are received.
Development status and known browser-close issue
ATS Mini PC Control and FT8 website integration are still under active development. A known native-USB/browser issue can make the ATS Mini reboot when the final browser tab that owns its USB connection is closed or reloaded. This can still happen after using DISCONNECT.
For now, keep the original PC Control or FT8 tab open while using the radio. When following a website link, allow it to open in a new tab rather than closing the original. If the radio restarts after a page closes, reconnect normally; the firmware and saved settings remain installed.
We are continuing to investigate this browser/USB behavior using user feedback and hardware testing. Please report reproducible problems through the Diamond Radio community channels.
Updating to v1.0.7
Connect the radio to an internet-enabled Wi-Fi network and use either:
- Diamond Dual Boot → OTA UPDATE, or
- Diamond Radio → Settings → OTA UPDATE.
With Diamond Dual Boot v2.0 or newer, Diamond's OTA path updates only the current Diamond slot and verifies the downloaded image's exact size and SHA-256. Keep the radio powered and connected throughout the update. Keeping a known-good firmware in the other slot is recommended.
For manual installation, download the application image matching the radio's actual 16 MB or 8 MB flash capacity and install it into an application slot using the official Diamond tools. Never overwrite the factory boot-manager partition.
Do not use the OTA button inside PUBLIC ATS MINI when you want to preserve the other slot. Its built-in updater writes the opposite slot and can overwrite Diamond Radio. Update PUBLIC ATS MINI only through the manager's PUBLIC ATS MINI - SAFE OTA path, selecting the same slot where it currently runs.
Package
- Separate 16 MB and 8 MB ESP32-S3 application images
- OTA metadata with exact image sizes and SHA-256 hashes
SHA256SUMS.txtfor download verification- Upstream MIT license, Diamond freeware notice, and third-party notices
The images are not interchangeable. Select the image matching the radio's actual flash capacity and never overwrite the Diamond factory boot-manager partition.
Diamond Radio ATS Mini v1.0.6 build 7
Diamond Radio ATS Mini 1.0.6 — Build 7
A major decoder, waterfall, and quality-of-life release. It adds live FT8/FT4/FT2 waterfall decoders, rebuilt CW/RTTY, PSK31, SSTV and WEFAX, fast standalone-waterfall controls, persistent frequency lock, temperature units, and multiple stability fixes.
Frequency lock and weather units
FREQ LOCK
- Added MENU → FREQ LOCK and optional SETTINGS → QUICK SET → FREQ LOCK.
- The ON/OFF state and current frequency are saved immediately and restored after restart.
- While locked, ordinary rotation and press-and-turn digit tuning cannot change the frequency.
- Rotate right/left to increase/decrease volume instead.
- Hold the knob to open Quick List even when long-press is normally configured for NUMPAD. Short-press still opens the main menu, so both lock controls remain reachable.
- Default is OFF; ordinary unlocked tuning is unchanged.
TEMP UNIT
- Added SETTINGS → TEMP UNIT → CELSIUS / FAHRENHEIT.
- The selection applies to current weather, daily high/low temperatures, and the five-day view.
- Celsius remains the default, and the selection persists after restart.
Digital and image decoders
Open MENU → DECODER and choose from CW, RTTY, PSK31, FT8, FT8 + WF, FT4 + WF, FT2 + WF, SSTV, or WEFAX.
FT8 + WF — new live-waterfall decoder
- Added an independent, higher-performance FT8 decoder with a smooth real-time audio waterfall and responsive controls, while preserving the original FT8 mode as a separate choice.
- Shows decoded stations with country flags, message details, locator, distance, and bearing.
- Includes the station list, detailed station view, offline map, QTH/route markers, band presets, visual noise filter, auto-hop, volume, clear, and exit controls.
- The original FT8 decoder and its established behavior are not replaced.
FT4 + WF and FT2 + WF
- Added FT4 + WF with USB presets, live waterfall, decoding, station list/details/map, flags, auto-hop, palettes, noise filter, and audio-input selection.
- Added FT2 + WF with responsive decoding, FT2 USB presets, and the same Diamond station presentation and controls.
- Fixed a problem that could cause a reboot when exiting FT2 + WF. FT8/FT4/FT2 waterfall sessions now enter and exit cleanly.
Using FT8/FT4/FT2 + WF
- Choose the desired + WF decoder from MENU → DECODER.
- Select a band preset. The radio tunes the listed frequency in USB automatically.
- Rotate on the main decoder screen for 100 Hz fine tuning.
- Short-press a decoded station for its information. Open STATION LIST from the hold menu to browse all heard stations.
- Hold for approximately half a second to open actions: MAP, STATION LIST, CHANGE BAND, AUTO HOP, WATERFALL COLORS, NOISE FILTER, AUDIO INPUT, VOLUME, CLEAR, and EXIT.
- In the map, rotate to move between located stations. Short-press to switch between station selection and zoom; rotate to zoom while zoom mode is active. Hold to return to decoding.
- AUDIO INPUT → ADC is the default and uses the radio's existing audio input without extra hardware. MIC is optional for suitable INMP441 wiring; ordinary reception should use ADC.
Wi-Fi is paused during these decoder sessions and restored on normal exit. If the radio is powered off during decoding, saved station credentials now authorize Wi-Fi reconnection at the next boot.
CW, RTTY, and PSK31
- Rebuilt CW and RTTY for improved reception and added PSK31.
- CW automatically tracks the received tone and sending speed.
- RTTY supports 45.45/50/75 baud, 170/450/850 Hz shifts, normal/reverse modes, and unshift-on-space.
- PSK31 includes automatic/manual carrier control, carrier tracking, and squelch.
- Each mode has a live spectrum, signal level, decoder status, and four automatically wrapping/scrolling text lines.
- Fixed spectrum flicker, clipped lower text, row spacing, and bottom-edge layout problems.
Rotate to tune CW/RTTY or adjust the PSK31 carrier. Hold for preset, mode, carrier/squelch, clear-text, volume, back, and exit actions as applicable to the selected decoder.
SSTV
- Added progressively drawn SSTV images with automatic VIS detection and manual mode selection.
- Supported modes: Martin M1/M2, Scottie S1/S2/DX, Robot 36/72, B/W 8/12/24/36, and PD50/90/120/160/180/240/290.
- Improved sync recovery to prevent repeated false SIGNAL LOST restarts during otherwise decodable Martin M1 reception.
- Rotate to fine-tune in 50 Hz steps. Hold for SSTV MODE, CLEAR IMAGE, VOLUME, EXIT SSTV, and BACK.
WEFAX
- Added progressively drawn grayscale WEFAX reception with IOC 576, automatic phasing, calibrated black/white levels, stop-tone detection, and manual start.
- Supports 120/90/60 LPM line speeds.
- Rotate to fine-tune in 50 Hz steps. Hold for START NOW, STOP, LINE SPEED, CLEAR IMAGE, VOLUME, EXIT WEFAX, and BACK.
Live audio waterfall
The old muted signal-strength sweep has been replaced by a real-time audio waterfall. The current station remains audible and tunable while the waterfall is running.
Open and control the standalone waterfall
- Double-click the knob on the normal radio screen to open it immediately.
- It is also available through MENU → WATERFALL.
- A single click on the radio screen still opens the menu after a short double-click detection interval.
- Rotate normally to tune the receiver.
- Hold once: enter color mode. Rotate to change the palette and watch the existing waterfall recolor immediately.
- Hold again: enter full-screen tuning mode. The bottom information/help area disappears and the waterfall expands to the bottom of the display. Rotate to tune.
- Hold again: enter full-screen color mode and rotate to change colors.
- Hold once more: return to the normal waterfall layout.
- Single-click in any waterfall mode: exit to the radio.
Waterfall settings
- SETTINGS → WF SPEED: SLOW (160 ms/row) or FAST (48 ms/row). This controls the standalone and compact display waterfalls, not decoder protocol timing.
- SETTINGS → WF COLOR: seven persistent shared palettes: DIAMOND, PHOSPHOR, AMBER, ICE, BLUE, VIOLET, and SUNSET.
- The same palette is used by the standalone waterfall, compact SIGNAL BOX waterfall, and FT8/FT4/FT2 + WF displays.
- Fixed waterfall startup failures, unstable in-page headers, and radio/menu flicker or ghosting after exit.
Main-screen SIGNAL BOX waterfall
- Added SETTINGS → SIGNAL BOX → GRAPH / WATERFALL.
- GRAPH preserves the red RSSI and yellow SNR history display.
- WATERFALL places a live audio waterfall inside the left signal box while retaining the normal radio page and controls.
- WF SPEED and WF COLOR also control this compact view.
- Fixed incorrect compact-waterfall appearance after powering on directly into FM.
EXTRA and rain-map reliability
- Added EXTRA → EXIT for a direct return to the radio.
- Leaving RAIN MAP stops unnecessary download activity and prevents stale screen updates.
- Fixed persistent radio/menu flicker and ghost shadows after leaving RAIN MAP.
- Rain caching, QTH-centered zoom, offline reopening, propagation, forecast, and weather behavior remain available as in v1.0.5.
Receiver coverage and other fixes
- Extended CB and SW ALL upper coverage to include 27.455 MHz.
- Existing bands, tuning steps, decoder presets, and modulation behavior remain unchanged.
- Saved Wi-Fi station credentials now trigger reconnection after reboot even if power was removed while a decoder had temporarily paused Wi-Fi.
- Improved decoder and waterfall stability, including reliable exit and re-entry.
Updating to v1.0.6
Connect the radio to an internet-enabled Wi-Fi network. Use either:
- Diamond Dual Boot → OTA UPDATE, or
- Diamond Radio → Settings → OTA UPDATE.
With Diamond Dual Boot v2.0 or newer, Diamond's OTA path updates only the current Diamond slot and verifies the downloaded image's exact size and SHA-256. Keep the radio powered and connected throughout the update. Keeping a known-good firmware in the other slot is recommended.
For manual installation, download the application image matching the radio's actual 16 MB or 8 MB flash capacity and install it into an application slot using the official Diamond tools. Never overwrite the factory boot-manager partition.
Do not use the OTA button inside PUBLIC ATS MINI when you want to preserve the other slot. Its built-in updater writes the opposite slot and can overwrite Diamond Radio. Update PUBLIC ATS MINI only through the manager's PUBLIC ATS MINI - SAFE OTA path, selecting the same slot where it currently runs.
Package
- Separate 16 MB and 8 MB ESP32-S3 application images
- OTA metadata with exact image sizes and SHA-256 hashes
SHA256SUMS.txtfor download verification- Upstream MIT license, Diamond freeware notice, and updated third-party notices
The images are not interchangeable. Select the image matching the radio's actual flash capacity and never overwrite the Diamond factory boot-manager partition.
Diamond Radio ATS Mini v1.0.5 build 7
Diamond Radio ATS Mini 1.0.5 — Build 7
A feature and reliability release with new EXTRA tools, expanded receiver controls, additional FT8 presets, and detailed EiBi transmitter information and maps.
EXTRA: propagation, forecast, weather, and rain radar
- Added EXTRA to the main menu and as an optional Quick-menu action. VOLUME is now the first functional main-menu item.
- PROPAGATION shows an original world map with your saved or IP-derived QTH, UTC day/night shading, solar indices, and selectable 160/80/60/40/30/20/17/15/12/10 m band conditions.
- FORECAST presents three days of NOAA three-hour Kp predictions as knob-selectable daily graphs.
- WEATHER shows current conditions and a knob-selectable NEXT 5 DAYS view with daily conditions, high/low temperatures, and rain probability.
- RAIN MAP combines OpenStreetMap and the latest RainViewer radar around your QTH. It includes QTH-centered zoom 3–7, a zoom badge, an accurate distance scale, full four-tile coverage, and visible refresh progress.
- Rain maps are cached on the radio for fast reopening and offline viewing. Turning the knob updates the zoom display immediately and downloads only the final selected zoom after a short pause.
- Network reliability was improved with dynamic TLS buffers, staged LittleFS downloads, bounded memory use, complete-request retries, clearer error diagnostics, and cached/stale-data fallbacks.
Using EXTRA
Open MENU → EXTRA, then choose a tool. EXTRA needs Wi-Fi with internet access for fresh online data; the rain map can reopen its saved cache offline. Rotate the knob to change the propagation band, forecast day, weather page, or rain-map zoom. Short-press PROPAGATION, FORECAST, or RAIN MAP to refresh/retry. Hold the knob to go back.
Receiver operation and display
- Added Settings → FM REGION:
- WORLD: 87.5–108 MHz (default)
- JAPAN: 76–95 MHz Wide FM
- FM region limits apply to tuning, seek/ATS, presets, band memory, and web control, and persist after restart.
- Fixed SSB audio remaining muted after band/mode changes until bandwidth was adjusted.
- Added Settings → CALLSIGN. An entered callsign appears in orange on the boot splash; leaving it empty preserves the standard splash.
- Fixed favorites navigation: rotating now selects a slot without unexpectedly retuning an occupied favorite.
- Fixed cropping of the final M in the MHz unit on long frequencies.
- The left signal-history RSSI trace is now red; the SNR trace remains yellow.
Using favorites and Quick FAV TUNE
In the favorites list, rotate to select a slot, short-press an occupied slot to tune it, long-press an empty slot to save the current station, and long-press an occupied slot to delete it.
For tune-as-you-scroll behavior, enable Settings → QUICK SET → FAV TUNE, then use Quick → FAV TUNE to switch it ON or OFF. Keep it OFF when you want to move safely from an occupied slot to an empty slot before saving.
Tuning mute, Soft Mute, and NUMPAD
- Added persistent Settings → TUNE MUTE, default ON. It suppresses the tuning noise while turning the knob and restores audio shortly after tuning stops.
- Fixed SOFT MUTE OFF remaining off after restart and made FM use the selected Soft Mute value instead of a fixed value.
- Added an on-screen 12-key NUMPAD for direct frequency entry in the current band and mode.
- Added Settings → LONG PRESS to choose whether holding the knob on the radio screen opens QUICK LIST or NUMPAD.
- NUMPAD can also be added through Settings → QUICK SET.
Using NUMPAD
FM accepts MHz with up to three decimal digits; AM/LSB/USB accept integer kHz. Rotate to select a key and short-press to enter it or confirm OK. Long-press deletes a character; long-press with an empty entry cancels. Frequencies outside the current band are rejected. The page closes after 20 seconds without input.
FT8 presets
- Added 11m CB — 27.245 MHz USB and 11m CB — 27.265 MHz USB to the FT8 band chooser.
- Both are available when entering FT8 and through CHANGE FT8 BAND in the FT8 hold menu.
- These are community-used CB digital frequencies, not official amateur-band allocations. The established FT8 decoder and DSP behavior are unchanged in this release.
EiBi transmitter details and offline map
- EiBi schedule updates now also retrieve compact transmitter-site reference data. Normal schedule downloads remain usable if the site reference cannot be downloaded.
- While tuned to an active scheduled station, the radio can show its transmitter site, host country, great-circle distance, and initial bearing from your saved QTH.
- Long location information is arranged in two fitted rows beside the signal-history box without overlapping it.
- Added optional Settings → QUICK SET → EIBI MAP. The map works offline and shows your QTH in red, the transmitter in gold, a great-circle route, and station/site/country with distance and bearing.
- Added transmitter-centered X1/X2/X4/X8 zoom.
- Fixed Quick-menu selection so enabled actions remain selectable when other entries are hidden in AM/SSB.
Using EIBI MAP
Update the EiBi database using the existing EiBi controls, tune to an active scheduled station with transmitter information, enable EIBI MAP in Settings → QUICK SET, then open Quick → EIBI MAP. Rotate to zoom and press or hold to return. Distance, bearing, and the QTH marker require a saved QTH; a missing QTH does not prevent viewing the transmitter location.
Updating to v1.0.5
Connect the radio to an internet-enabled Wi-Fi network. Use either:
- Diamond Dual Boot → OTA UPDATE, or
- Diamond Radio → Settings → OTA UPDATE.
With Diamond Dual Boot v2.0 or newer, Diamond's OTA path updates only the current Diamond slot and verifies the downloaded image. Keep the radio powered and connected throughout the update. Keeping a known-good firmware in the other slot is recommended.
Do not use the OTA button inside PUBLIC ATS MINI when you want to preserve the other slot. Its built-in updater writes the opposite slot and can overwrite Diamond Radio. Update PUBLIC ATS MINI only through the manager's PUBLIC ATS MINI - SAFE OTA path, selecting the same slot where it currently runs.
Package
- Separate 16 MB and 8 MB ESP32-S3 application images
- OTA metadata with exact image sizes and SHA-256 hashes
SHA256SUMS.txtfor download verification- Upstream MIT license, Diamond freeware notice, and third-party notices
The images are not interchangeable. Select the image matching the radio's actual flash capacity and never overwrite the Diamond factory boot-manager partition.
Diamond Radio ATS Mini v1.0.4 build 6
Diamond Radio ATS Mini 1.0.4 — Build 6
Adds selectable Wi-Fi transmit power for radios that need reduced Wi-Fi current.
What's new
- New Settings → WI-FI POWER menu with NORMAL and SAFE - 13 dBm choices.
- NORMAL is the default and preserves the existing behavior: a 14 dBm maximum, or the existing adaptive 14/13/8/5 dBm levels when Power Save is enabled.
- SAFE - 13 dBm applies a fixed 13 dBm limit, including when Power Save is active.
- The setting applies immediately and is saved across restarts. It covers station/AP mode, scans, the web console, and FT8-over-Wi-Fi.
- Diamond Dual Boot v2.1 provides a separate SETTINGS → WIFI POWER choice for manager Wi-Fi setup and OTA. Its initial default is SAFE; NORMAL restores the manager's previous default transmit power.
Package
- 16 MB and 8 MB ESP32-S3 application images
- SHA-256 checksums for both images
- OTA metadata for supported radios
- Upstream MIT license, Diamond freeware notice, and third-party notices
Compatibility note
Some clone boards can reset or brown out when Wi-Fi transmission causes a power-supply voltage drop. SAFE mode is intended for those boards. This release has been installed and hash-verified on a v4 radio; confirmation on an affected clone still requires field testing. Reducing transmit power can reduce Wi-Fi range.
Important
Diamond Dual Boot v2.0 or newer updates only the current Diamond slot and preserves the other slot. Do not use the OTA button inside PUBLIC ATS MINI when preserving the other slot: its built-in updater writes the opposite slot and can overwrite Diamond Radio. Use the manager's PUBLIC ATS MINI - SAFE OTA path and select the slot where PUBLIC ATS MINI currently runs. Back up the existing firmware and keep a known-good application in the other slot. Select the image matching the radio's flash capacity and never overwrite the Diamond factory boot manager.
Diamond Radio ATS Mini v1.0.3 build 5
Diamond Radio ATS Mini 1.0.3 — Build 5
Reception, stability, FM coverage, and RDS improvements.
What's new
- Corrected AM AGC-off gain and AVC maximum-gain conversion for stronger, more consistent reception.
- Corrected AM/SSB antenna tuning above 1.8 MHz while retaining automatic MW/LW selection.
- Restored each band's default modulation, including USB on the upper HF ham bands.
- Fixed restoration of the saved 2 kHz AM bandwidth.
- Seek now uses the correct channel spacing independently of fine-tune steps, with RF gain reapplied after every seek path.
- Station naming from the web interface now runs safely in the receiver task, preventing AP-mode reboots and reporting failed saves.
- CW and RTTY decoding now use a yielding worker with bounded shutdown to prevent menu freezes.
- FM coverage now starts at 87.5 MHz.
- RDS resets on retune and station-identity changes, then displays the station name progressively as valid characters arrive instead of waiting for the complete name.
- No additional RSSI/SNR threshold was imposed on RDS decoding.
Package
- 16 MB and 8 MB ESP32-S3 application images
- SHA-256 checksums for both images
- OTA metadata for supported radios
- Upstream MIT license, Diamond freeware notice, and third-party notices
Important
Diamond Dual Boot v2.0 updates only the current Diamond slot and preserves the other slot. Do not use the OTA button inside PUBLIC ATS MINI when preserving the other slot: its built-in updater writes the opposite slot and can overwrite Diamond Radio. Use the manager's PUBLIC ATS MINI - SAFE OTA path and select the slot where PUBLIC ATS MINI currently runs. Back up the existing firmware and keep a known-good application in the other slot. Select the image matching the radio's flash capacity and never overwrite the Diamond factory boot manager.
Diamond Radio ATS Mini v1.0.2 build 4
Diamond Radio ATS Mini 1.0.2 — Build 4
Slot-preserving OTA through Diamond Dual Boot v2.0.
What's new
- Settings → OTA UPDATE now hands the update to Diamond Dual Boot.
- Only the currently running Diamond slot is replaced; the other firmware remains unchanged.
- Dual Boot v2.0 also provides PUBLIC ATS MINI - SAFE OTA into a user-selected slot, with the release version shown during confirmation.
- The manager verifies Diamond's exact image size and SHA-256 and checks the other slot before and after installation.
- Dual Boot SETTINGS → WIFI SETUP scans networks and saves a manager-owned connection, allowing OTA into empty slots after a clean install.
- Typed password characters are visible for correction; saved passwords are not displayed.
- Successful setup shows the network and IP address, and a green WIFI CONNECTED indicator appears on the manager's main screen.
- Receiver-saved WiFi credentials can also be reused.
Package
- 16 MB and 8 MB ESP32-S3 application images
- SHA-256 checksums for both images
- OTA metadata for supported radios
- Upstream MIT license, Diamond freeware notice, and third-party notices
Important
Install or upgrade to Diamond Dual Boot v2.0 before using this OTA handoff. Do not use the OTA button inside PUBLIC ATS MINI when preserving the other slot: its built-in updater writes the opposite slot and can overwrite Diamond Radio. Use the manager's PUBLIC ATS MINI - SAFE OTA path and select the slot where PUBLIC ATS MINI currently runs. Back up the existing firmware and keep a known-good application in the other slot. Select the image matching the radio's flash capacity and never overwrite the Diamond factory boot manager.
Diamond Radio ATS Mini v1.0.1 - Build 3
Adds centered FM and AM signal-strength indicators with the tested long-long-short-short rhythm.
FM: green RSSI 45+, orange 25-44, red below 25.
AM: green RSSI 40+, orange 20-39, red below 20.
Includes the build-2 automatic three-second restart after an up-to-date OTA check. Both 16 MB and 8 MB images use checksum-verified A/B OTA installation. Older releases remain available for manual recovery.
Diamond Radio ATS Mini v1.0.1
Diamond Radio ATS Mini 1.0.1
First public Diamond Radio ATS Mini firmware release, with verified over-the-air updates.
Highlights
- Diamond Radio receiver interface for ATS Mini ESP32-S3/SI4732 hardware
- FT8 decoding, station map, country information, and FT8 over WiFi
- Safe A/B OTA updates with release notes, exact-size checks, and SHA-256 verification
- Separate application images for 16 MB and 8 MB radios
- WiFi receiver control, EiBi schedule support, and Diamond dual-boot compatibility
Package
- 16 MB and 8 MB ESP32-S3 application images
- SHA-256 checksums for both images
- OTA metadata for supported radios
- Upstream MIT license, Diamond freeware notice, and third-party notices
Important
Back up the existing firmware and keep a known-good application in the other dual-boot slot. Select the image matching the radio's flash capacity and never overwrite the Diamond factory boot manager.