Repository navigation
SimpleHPSDR 0.10.5
VOX that no longer hangs the radio keyed, an ALC bar meter, a headphone mode for VOX, and a sharper filter close-up.
Fixed
- VOX could leave the radio stuck transmitting until you pressed MOX. If you started talking again just as VOX dropped, it keyed again before the radio had finished switching back, then lost track of that key and never let go. VOX now waits for the radio to finish switching back before it keys again. This is the "MOX and VOX tripping over each other" some of you reported.
- VOX clipped the first syllable. The radio now sends a little more of the audio from just before it keys.
- VOX turned Mon off. Through speakers the mic heard the monitor and held the radio keyed, so Mon pauses while VOX is on. With headphones you can now keep it (see below).
- Quitting from a terminal (Ctrl-C or kill) could crash the app as it closed and leave the radio engine running for a few seconds. It now closes cleanly.
New
- ALC bar meter. Under the signal meter, ALC now has a coloured bar like the S-meter: green is fine, orange from 10 dB, red from 15 dB means turn the mic gain down. A white mark holds the peak for 2 seconds. On FM it shows deviation (DEV), red when over full deviation. ALC sits on the left with PWR and SWR on the right, and the two bars are the same length. The mini window has it too.
- Headphone mode for VOX. Right-click VOX and tick Headphone mode to keep Mon and TX Mon working while VOX is on. Headphones must be used to monitor during VOX: through speakers the mic hears the monitor and holds the radio keyed.
- High-resolution filter close-up. The close-up at the top right can show a fine spectrum of its own, down to 1 Hz, so you see the separate tones in a voice and a CW signal as a narrow spike. A box along its top shows the low and high cuts in Hz. Its fill is coloured like the waterfall. Right-click it (long press on touch) for High resolution, Detail (4, 2 or 1 Hz), the fill, and averaging. High resolution and the colour fill are switched on once for everyone with this version.
Changed
- VOX delay: 1000 ms is recommended, and is now the default for new installs. Shorter, pauses between phrases drop transmit and words are lost while the radio switches back. Your own setting is kept, so if VOX drops in the middle of your sentences, right-click VOX and set Delay to 1000 ms. The delay can't be set shorter than the RX resume delay (Config > Amp) plus 20 ms.
Install
macOS 14 or later: open the DMG and drag SimpleHPSDR to Applications. Use arm64 for Apple Silicon, x64 for Intel. The app isn't signed by Apple, so the first time, run:
xattr -dr com.apple.quarantine /Applications/SimpleHPSDR.appAllow it when it asks to find devices on your local network.
Linux (x86-64 and arm64):
sudo apt install ./simplehpsdr_*.deb # Ubuntu 26.04, Debian 13
sudo dnf install ./simplehpsdr-*.rpm # Fedora
sudo pacman -U ./simplehpsdr-*.pkg.tar.zst # ArchRaspberry Pi OS Trixie or Bookworm (64-bit, Pi 4 or 5, or an ANAN G2's CM4/CM5): download the arm64 .deb, then:
cd ~/Downloads
sudo apt update
sudo apt install ./simplehpsdr_*_arm64.debTo start SimpleHPSDR when the Pi desktop logs in, see "Small touch screens" in the README.
Windows 10 or 11 (x64), preview: run SimpleHPSDR-0.10.5-win-x64-setup.exe. It installs for you alone, with no administrator password, and adds SimpleHPSDR to the Start menu and Settings > Apps for uninstalling. To upgrade later, just run the new version's setup. Or, as before, unzip the .zip somewhere you can write to and run SimpleHPSDR.exe. Either way your settings are kept in %LOCALAPPDATA%\SimpleHPSDR, so they carry over to new versions, and uninstalling leaves them. At the SmartScreen warning choose More info, then Run anyway. When Windows asks about StationEngine.exe, say yes, or the radio won't be found.
Licences
Station Engine comes from the Zeus SDR project (GPL); this build's source with SimpleHPSDR's changes is at https://github.com/kingsqueak/station-engine, tag v2.0.68-simplehpsdr.24. DRM decoding uses DecDRM (GPL-2.0-or-later) with FDK-AAC, Opus and libxaac, through SimpleDream's bridge (https://github.com/kingsqueak/SimpleDream). Their licences are in each package's drm-licenses folder. The DeepCW model is by e04 (MIT), run with Microsoft's ONNX Runtime (MIT).
SHA-256
92b503170ae15a10549a75c1da489d50e3362bd6bf3d8739447808578d4b6e65 SimpleHPSDR-0.10.5-arm64.dmg
4e9bfaf033556e3f107651f6e425fecea94fc04c03e5cc4b8dd4dc4a049d2fe3 SimpleHPSDR-0.10.5-x64.dmg
15f32d91dcf1b0bd82343531e51a3c1ee25c826cb24090f8a168c0cf2ae0837b simplehpsdr-0.10.5-1-aarch64.pkg.tar.zst
921af0421559dfb88fa98ed8ef652218984150c1af385f81a1dc874404c10721 simplehpsdr-0.10.5-1.aarch64.rpm
38613550d8d58640cf19e08ad39c0f71bdbaa15727d60f4b9165cd2061cb3e3b simplehpsdr_0.10.5-1_arm64.deb
b5285da77334b4ba577a7afa616e7ccb0ec59b7064c152d10e9a5fded9ef7ab4 simplehpsdr-0.10.5-1-x86_64.pkg.tar.zst
bfd99b6641eb24228ee163eca6397475536babf438f50e3d0af8b72872e8dc02 simplehpsdr-0.10.5-1.x86_64.rpm
cd511e16826de96c0fbbef91be4137eabad00c49c5263b7acbdcefde9fd1b71e simplehpsdr_0.10.5-1_amd64.deb
3770e51966fef858c5654ddfc2328fdd99b8db2f5ed9e7dfb06b6443cc705283 SimpleHPSDR-0.10.5-win-x64-setup.exe
1b0c23a86f1220a4a8856c92687c6984b4f0db86599a2bccfa1ce31a311ad6e1 SimpleHPSDR-0.10.5-win-x64.zip