Repository navigation
SimpleHPSDR 0.10.6
No more clicks when you switch Mon in AM, settings that stay put, and a main window that opens where you left it.
Fixed
- Clicks in AM when switching Mon or TX Mon. In AM the receiver passes the carrier through as a steady DC level, so every switch between receive and monitor jumped the speaker and clicked. That DC is now taken out of the audio, and the switch is smoothed over a few milliseconds. As a bonus, listening to AM no longer puts a DC offset into your speakers or amplifier.
- AM options didn't stick. Opening the Mode right-click popup could write the sliders' lowest values over your Broadcast AM settings before your real ones had loaded. The same thing could happen to NR2's Trained T2 and NNR's Tau. They now load first and nothing is sent until they have.
- Settings that were lost when SimpleHPSDR closed: VFO lock, the diversity null (gain and phase), transmit on slice B, the CW decoder on/off, and anything changed in the last second before quitting. The radio engine is now asked to close in order and saves everything on its way out, instead of being stopped hard.
- Closing could take more than 10 seconds when another program was connected over TCI. It now closes in under a second.
- Safer when the engine can't be read. If loading failed, a later change could have sent defaults over your CW macros and keyer settings, your notches, your RX Lev settings, or your TCI and CAT setup (including all four serial CAT ports). Each now waits until it has been read.
- Config > TX Audio sent the TX filter for slice A's mode while slice B was transmitting, which could put an LSB passband on the wrong side. It now uses the transmitting slice's mode.
- Smaller fixes: changing an FM option no longer resets deviation to 2.5 or 5 kHz; the CW popup's pitch, sidetone and hang sliders and the S-meter trim now cover the full range the radio allows; opening the Display popup no longer switches Auto off; the Mute button stays in step after reconnecting; Undo in Config also puts back "TX filter follows RX" and the chosen TX profile; a TX profile that fails to load no longer leaves its name selected for Save.
New
- The main window remembers its size and position, and whether it was maximised. If that screen has gone, it opens in the usual place at the remembered size.
- Broadcast-style AM is explained in the Mode right-click popup, with tips on Pre-emphasis and Invert polarity.
Install
macOS 14 or later: open the DMG and drag SimpleHPSDR to Applications. Use arm64 for Apple Silicon, x64 for Intel. The app isn't signed by Apple, so the first time, run:
xattr -dr com.apple.quarantine /Applications/SimpleHPSDR.appAllow it when it asks to find devices on your local network.
Linux (x86-64 and arm64):
sudo apt install ./simplehpsdr_*.deb # Ubuntu 26.04, Debian 13
sudo dnf install ./simplehpsdr-*.rpm # Fedora
sudo pacman -U ./simplehpsdr-*.pkg.tar.zst # ArchRaspberry Pi OS Trixie or Bookworm (64-bit, Pi 4 or 5, or an ANAN G2's CM4/CM5): download the arm64 .deb, then:
cd ~/Downloads
sudo apt update
sudo apt install ./simplehpsdr_*_arm64.debTo start SimpleHPSDR when the Pi desktop logs in, see "Small touch screens" in the README.
Windows 10 or 11 (x64), preview: run SimpleHPSDR-0.10.6-win-x64-setup.exe. It installs for you alone, with no administrator password, and adds SimpleHPSDR to the Start menu and Settings > Apps for uninstalling. To upgrade later, just run the new version's setup. Or, as before, unzip the .zip somewhere you can write to and run SimpleHPSDR.exe. Either way your settings are kept in %LOCALAPPDATA%\SimpleHPSDR, so they carry over to new versions, and uninstalling leaves them. At the SmartScreen warning choose More info, then Run anyway. When Windows asks about StationEngine.exe, say yes, or the radio won't be found.
Licences
Station Engine comes from the Zeus SDR project (GPL); this build's source with SimpleHPSDR's changes is at https://github.com/kingsqueak/station-engine, tag v2.0.68-simplehpsdr.26. DRM decoding uses DecDRM (GPL-2.0-or-later) with FDK-AAC, Opus and libxaac, through SimpleDream's bridge (https://github.com/kingsqueak/SimpleDream). Their licences are in each package's drm-licenses folder. The DeepCW model is by e04 (MIT), run with Microsoft's ONNX Runtime (MIT).
SHA-256
4df943b6ebc27c6edaee3e0843fdff5e470e39d7e318ddd1bf58e9038e22538f SimpleHPSDR-0.10.6-arm64.dmg
39c883e494fceb2877859da0b6c553e6d79c8b154223a293a81450b667e23a6c SimpleHPSDR-0.10.6-win-x64-setup.exe
0b2a3503c1b402e9c01bdd74f9456190ddedcac87b32a880e37a0dfb653879d0 SimpleHPSDR-0.10.6-win-x64.zip
ac9f0793eb7d8344abc20b768740ee215f5123b9bc6ec5e5ea76b0324bea9dee SimpleHPSDR-0.10.6-x64.dmg
238f24044c9c5230f9a9e9088274f6d2c12ad5c7edb10bb5235470821140e8ce simplehpsdr-0.10.6-1-aarch64.pkg.tar.zst
f802ed448f5b78e3bc02b45d75f4ccc524a87ca70a84a407c87746ee26c93777 simplehpsdr-0.10.6-1-x86_64.pkg.tar.zst
6764e36a205b35d9ebd8430ba6c6e4727d4b2acc2bb4a88d4a30b392d00d676e simplehpsdr-0.10.6-1.aarch64.rpm
58efd79f02a0543a6d3c82c8b56db7352c30d9e96f862db24ea6a299ea649aa4 simplehpsdr-0.10.6-1.x86_64.rpm
56e0a174f3fa85072ec0cf848b67cdfa1a6762f6873bd9ed03da8b05658589a2 simplehpsdr_0.10.6-1_amd64.deb
d8bf08bf85354595055f6dbb8ba94bd2b9a610ec96f04d03db700f5c0cb13991 simplehpsdr_0.10.6-1_arm64.deb