Skip to content

SimpleHPSDR 0.13.0

Choose a tag to compare

@kingsqueak kingsqueak released this 17 Nov 15:08
· 11 commits to main since this release

Two receivers with a panadapter each, a Pan slider to put them in different ears, 48 memories, and a side panel you can drag wider.

New

  • Two receivers. RX1 and RX2 buttons beside the frequency pick the receiver the controls act on. RX2 opens its own panadapter, with a small VFO on each. Drag the bar between the panadapters to share the room.
  • Pan slider. With two receivers on, Pan under the two volume sliders puts them in different ears. It works on the computer's sound output, not the radio's speaker or headphone jack.
  • 48 memories. Mem has three tabs, A, B and C, of 16 each. The memories you already have are in A.
  • Side panel width. Drag the panel's left edge to make it wider or narrower. Double-click it for the standard width.
  • Spectrum grid. Its colour and strength are in Config > Colors, and the dB lines get finer when you zoom in.
  • Filter close-up. A line follows the mouse, with a flag showing the audio frequency.
  • Touch layout. A View button goes to the desktop layout or the mini window. RX2 is in the spectrum's menu, a tap on a small VFO opens the keypad, each receiver has its own volume slider with Pan, and DRV is a button that opens a larger drive slider.
  • A receiver on the Rx2 jack can transmit.

Changed

  • Windows comes as an installer only. There is no zip.

Fixed

  • Frequency markers went missing when a zoomed display was dragged to one side.
  • A slice added on RX1's panadapter could come up silent.
  • Mute ran past the edge of the side panel.
  • A crash when quitting before the first transmission with PureSignal on. You wouldn't have seen it.

Worth knowing

  • The first start after updating takes a few minutes, once ("Getting ready for first use"). Leave it open until it finishes.
  • RX2 can't be turned off while you are transmitting on it.
  • This release went through a code review before it was built.

Install

macOS 14 or later: open the DMG and drag SimpleHPSDR to Applications. Use arm64 for Apple Silicon, x64 for Intel. The app isn't signed by Apple, so the first time, run:

xattr -dr com.apple.quarantine /Applications/SimpleHPSDR.app

Allow it when it asks to find devices on your local network.

Linux (x86-64 and arm64):

sudo apt install ./simplehpsdr_*.deb        # Ubuntu 26.04, Debian 13
sudo dnf install ./simplehpsdr-*.rpm        # Fedora
sudo pacman -U ./simplehpsdr-*.pkg.tar.zst  # Arch

Raspberry Pi OS Trixie or Bookworm (64-bit, Pi 4 or 5, or an ANAN G2's CM4/CM5): download the arm64 .deb, then:

cd ~/Downloads
sudo apt update
sudo apt install ./simplehpsdr_*_arm64.deb

To start SimpleHPSDR when the Pi desktop logs in, see "Small touch screens" in the README.

Windows 10 or 11 (x64), preview: run SimpleHPSDR-0.13.0-win-x64-setup.exe. It installs for you alone, with no administrator password, and adds SimpleHPSDR to the Start menu and Settings > Apps for uninstalling. To upgrade later, just run the new version's setup. Your settings are kept in %LOCALAPPDATA%\SimpleHPSDR, so they carry over to new versions, and uninstalling leaves them. At the SmartScreen warning choose More info, then Run anyway. When Windows asks about StationEngine.exe, say yes, or the radio won't be found.

Licences

Station Engine comes from the Zeus SDR project (GPL); this build's source with SimpleHPSDR's changes is at https://github.com/kingsqueak/station-engine, tag v2.0.68-simplehpsdr.50. DRM decoding uses DecDRM (GPL-2.0-or-later) with FDK-AAC, Opus and libxaac, through SimpleDream's bridge (https://github.com/kingsqueak/SimpleDream). Their licences are in each package's drm-licenses folder. The DeepCW model is by e04 (MIT), run with Microsoft's ONNX Runtime (MIT).

SHA-256

04986ff9afa8a89d170dc62c6d05a935a9ea3fa0656537912ab0b6d7686a585f  simplehpsdr_0.13.0-1_amd64.deb
d77210107ac5bfb5cc44d278e8cefac7b2b38591f1494b2fc07f45ea4262ca32  simplehpsdr_0.13.0-1_arm64.deb
e7e7e0090d4be0f3e0489a4662cedd8ee505b9d0c7f30ea676eda86a05353ec5  simplehpsdr-0.13.0-1-aarch64.pkg.tar.zst
2a40afa610e2ff82256108b69bf31b511e3b1fa25f494b0cba919f7116ff553b  simplehpsdr-0.13.0-1-x86_64.pkg.tar.zst
b89d2d424e3e10474fdf2a4e6b179ee6c6ce5027057e38018371e1ef1d14aba2  simplehpsdr-0.13.0-1.aarch64.rpm
fcd4deb49d9666b7f1f59093a7f0b78e1928adb3da818ff9bcad4a180b3e838d  simplehpsdr-0.13.0-1.x86_64.rpm
c6ce4495917bdfe3b807dbe2aae97c58b12c9e4adda3080111dadcb23f9d7c17  SimpleHPSDR-0.13.0-arm64.dmg
d27aa3cd67c03106bdbde06b47d2ea74a22df831653e23ff3f6c22907c31389f  SimpleHPSDR-0.13.0-win-x64-setup.exe
093ae4d758584fb9c41c1904c206ad3a2c6bdeb583737cde1b9188a0e3e2086b  SimpleHPSDR-0.13.0-x64.dmg