Skip to content

SimpleHPSDR 0.14.0

Latest

Choose a tag to compare

@kingsqueak kingsqueak released this 17 Nov 23:18
· 2 commits to main since this release

A Ulanzi Dial as a tuning knob on a Mac, a fix for taking a radio over from another computer, and faster NNR noise reduction.

New

  • Ulanzi Dial (Mac). A Ulanzi Dial (model D100H, Bluetooth) works as a tuning knob and eight buttons, whichever window is in front. The three top buttons choose what a turn does (tune, volume or zoom); pressing the dial in while turning tunes ten steps at a time; a press mutes; the side buttons step the band and the mode. A careful turn tunes one step a click, a faster one several, and a spin glides on like a flick of the panadapter. Every control can be given another job. Turn it on in Config > Hardware > Ulanzi Dial; macOS asks to allow SimpleHPSDR under Input Monitoring and Accessibility. While SimpleHPSDR runs, the dial stops changing the Mac's volume, sending media keys, typing and clicking. Ulanzi's own app is not needed.

Changed

  • NNR noise reduction is faster. About a fifth less processor time on a Raspberry Pi 5 and more than a third less on Apple silicon. The result is the same, sample for sample, as before.
  • Raspberry Pi: lighter by default. The filter close-up's High resolution now starts off on a Pi (it is switched off once on existing installs too; turn it back on and it stays on). Help has a new section, "Keeping the load down on a Raspberry Pi": on a Pi 5 at 192 kHz, NNR took about half of one processor core and NR2 about a seventh, so use NR2.

Fixed

  • Taking a radio over from another computer made its relays chatter. The computer that had the radio was never told and kept controlling it, so the radio had two controllers on different bands. Now a SimpleHPSDR that is taken over from lets go and says which computer took the radio. If the other program keeps running (an older SimpleHPSDR, or another program), the take-over is refused and asks you to stop it there first.
  • RX2's panadapter could not be dragged with CTUN off. It now drags like RX1's and stays put until you tune RX2.

Worth knowing

  • Updating tunes the signal processing once more on the first start, because the signal-processing library changed: a minute or two on a fast computer, longer on a slow one, and it carries on if you quit part-way (on Windows it starts again). A Raspberry Pi skips it.
  • Take over needs this version on both computers to hand the radio over cleanly. Taking over from 0.13.1 or earlier is refused while that copy is running; quit it there first. The refusal itself has not been tried on a radio yet.
  • The Raspberry Pi's ready-made tuning from 0.13.1 has now been tried on a Pi 5: the first start is immediate.
  • The dial is for the Mac only so far. macOS may ask for the two permissions again after an update.
  • The faster NNR was checked to give identical output on a Raspberry Pi 5 and an Apple silicon Mac. It has not been compared on Windows or on Intel processors, where no difference is expected.

Install

macOS 14 or later: open the DMG and drag SimpleHPSDR to Applications. Use arm64 for Apple Silicon, x64 for Intel. The app isn't signed by Apple, so the first time, run:

xattr -dr com.apple.quarantine /Applications/SimpleHPSDR.app

Allow it when it asks to find devices on your local network.

Linux (x86-64 and arm64):

sudo apt install ./simplehpsdr_*.deb        # Ubuntu 26.04, Debian 13
sudo dnf install ./simplehpsdr-*.rpm        # Fedora
sudo pacman -U ./simplehpsdr-*.pkg.tar.zst  # Arch

Raspberry Pi OS Trixie or Bookworm (64-bit, Pi 4 or 5, or an ANAN G2's CM4/CM5): download the arm64 .deb, then:

cd ~/Downloads
sudo apt update
sudo apt install ./simplehpsdr_*_arm64.deb

To start SimpleHPSDR when the Pi desktop logs in, see "Small touch screens" in the README.

Windows 10 or 11 (x64), preview: run SimpleHPSDR-0.14.0-win-x64-setup.exe. It installs for you alone, with no administrator password, and adds SimpleHPSDR to the Start menu and Settings > Apps for uninstalling. To upgrade later, just run the new version's setup. Your settings are kept in %LOCALAPPDATA%\SimpleHPSDR, so they carry over to new versions, and uninstalling leaves them. At the SmartScreen warning choose More info, then Run anyway. When Windows asks about StationEngine.exe, say yes, or the radio won't be found.

Licences

Station Engine comes from the Zeus SDR project (GPL); this build's source with SimpleHPSDR's changes is at https://github.com/kingsqueak/station-engine, tag v2.0.68-simplehpsdr.52. DRM decoding uses DecDRM (GPL-2.0-or-later) with FDK-AAC, Opus and libxaac, through SimpleDream's bridge (https://github.com/kingsqueak/SimpleDream). Their licences are in each package's drm-licenses folder. The DeepCW model is by e04 (MIT), run with Microsoft's ONNX Runtime (MIT).

SHA-256

7ed0764a9043ee54f2b9a4065449e7b644edff754ddd02b32085e4c8d6555d64  simplehpsdr_0.14.0-1_amd64.deb
ce82569ee41f561bfa5c291440e4d5ccc00b3c7d23810698a60ab7ed8c0f1346  simplehpsdr_0.14.0-1_arm64.deb
57d584a9c3799ebcb377099d67709afaf1d6f6dc8b316a5983018b0e115b9ffd  simplehpsdr-0.14.0-1-aarch64.pkg.tar.zst
01eafcd396ff0d46db849269b29c472ec691e6829928f0cf78f35b73de3739d1  simplehpsdr-0.14.0-1-x86_64.pkg.tar.zst
a373a7327a30bf2b8d347d564edd68c4c578af4e2a38999d5ff031957e07efb5  simplehpsdr-0.14.0-1.aarch64.rpm
ee2f8b02d2ed6d4723bb3f448b38d0d9e260d00e8a19b37ffe1e3ddf93d2c85b  simplehpsdr-0.14.0-1.x86_64.rpm
af30c4da5789ba418b96ad60764acefeee796a581b3fb6c94db377619fb5243e  SimpleHPSDR-0.14.0-arm64.dmg
97a011d5530dbfa8748c2623c1393ecae381643b8dbbd10365b979436f22ba89  SimpleHPSDR-0.14.0-win-x64-setup.exe
2fb2388217f5e79cfb834dab16992cd247669b7ffe8ca59f8546a74928d1c5a5  SimpleHPSDR-0.14.0-x64.dmg