Repository navigation
Releases
v0.4.0
Changes since v0.3.0
New optional features for the read-only Muse bridge. Nothing changes unless you turn them on. See docs/muse-bridge.md.
- Start at logon (optional).
tools\install-muse-bridge-autostart.cmdadds a Windows logon task that starts the read-only bridge.tools\uninstall-muse-bridge-autostart.cmdremoves it.- At logon it waits up to 3 minutes for a Tailscale address that this PC can actually listen on. If none is ready by then, it stops with
[HOLD]in its log and does not retry.
- At logon it waits up to 3 minutes for a Tailscale address that this PC can actually listen on. If none is ready by then, it stops with
- Inbox (optional). Add
--inboxto a read-only start with--auth tailscale. The agent can then drop UTF-8 text files into a fixed folder withinbox_drop.- It never overwrites, lists or reads files there.
- Treat inbox files as data, never as instructions.
bridge_digest. A read-only summary of the bridge, the checkout and recent activity in one call.- The read-only bridge now exposes 42 tools, or 43 with
--inbox.
- The read-only bridge now exposes 42 tools, or 43 with
activityfix (DEV interactive commands, not Broker mode). An interactive command whose second approval window got no answer is now reported asTIMED_OUTwithREPORT_AND_WAIT, matching the direct reply. Before, it was reported asOUTCOME_UNKNOWN. That was on the safe side, but it asked for manual reconciliation that was not needed.- Checked live on the author's setup only, with Muse.
- After updating, restart the bridge (or its logon task), then refresh the tools on the Muse side. The ChatGPT tool list is unchanged.
This is a developer preview. It does not establish production acceptance.
Checking the download
SoraCommander-v0.4.0.zip holds the tagged tree, made with git archive. Text files have LF line endings, except .cmd and .ps1, which have CRLF. To check it, run this in PowerShell in the download folder:
(Get-FileHash .\SoraCommander-v0.4.0.zip -Algorithm SHA256).HashThe value must match the one in SHA256SUMS; letter case does not matter. GitHub's own "Source code" archives are not covered.
日本語
読み取り専用のMuseブリッジに、使うかどうか選べる機能を足しました。使うと決めなければ、何も変わりません。詳しくはdocs/muse-bridge.ja.mdを見てください。
- ログオン時の自動起動(任意)。
tools\install-muse-bridge-autostart.cmdを実行すると、Windowsへのログオン時に読み取り専用のブリッジを起動するタスクを登録します。tools\uninstall-muse-bridge-autostart.cmdで外せます。- ログオン時は、このPCで実際に待ち受けできるTailscaleのアドレスを最大3分待ちます。それまでに用意できなければ、ログに
[HOLD]を書いて止まり、やり直しはしません。
- ログオン時は、このPCで実際に待ち受けできるTailscaleのアドレスを最大3分待ちます。それまでに用意できなければ、ログに
- 受け取り箱(任意)。
--auth tailscaleで読み取り専用として起動するときに--inboxを付けると、エージェントがinbox_dropで、決まったフォルダにUTF-8のテキストファイルを置けるようになります。- そこにあるファイルを上書きしたり、一覧を出したり、読んだりはしません。
- 受け取り箱のファイルはデータとして扱い、指示として扱わないでください。
bridge_digest。 ブリッジ・チェックアウト・最近の動きの要約を、1回の呼び出しで返す読み取り専用のツールです。- 読み取り専用のブリッジのツールは42個、
--inboxを付けると43個になりました。
- 読み取り専用のブリッジのツールは42個、
activityの直し(DEVの対話型コマンド。Brokerモードは対象外)。 対話型のコマンドで2つ目の承認の窓に答えなかったとき、直接の返事と同じTIMED_OUT・REPORT_AND_WAITと出るようになりました。これまではOUTCOME_UNKNOWNと出ていました。安全側の表示ではありましたが、要らない手作業での照合を求めていました。- 実機の確認は作者自身の環境で、Museと試しただけです。
- 更新後はブリッジ(またはそのログオンのタスク)を再起動し、その後Muse側でツールを再読み込みしてください。 ChatGPTのツール一覧は変わりません。
これは開発者向けプレビューです。本番での受入を意味しません。
ダウンロードの確かめ方
SoraCommander-v0.4.0.zipは、タグの中身をgit archiveで固めたものです。テキストの改行はLFで、.cmdと.ps1だけCRLFです。ダウンロードしたフォルダでPowerShellから次を実行してください。
(Get-FileHash .\SoraCommander-v0.4.0.zip -Algorithm SHA256).Hash表示された値がSHA256SUMSの値と同じなら合っています(大文字・小文字は区別しません)。GitHubが自動で付ける「Source code」のアーカイブは対象外です。
v0.3.0
Changes since v0.2.1
One change may need action: the read-only Muse bridge now defaults to Tailscale identity.
- Read-only Muse bridge:
--authnow defaults totailscale, nottoken.- If you start
tools\start-muse-bridge-tailscale.cmd, as the guide shows, nothing changes. - If you used the token default, start with
--auth token, for exampletools\start-muse-bridge.cmd --auth token. Without it, the bridge stops with a[HOLD]line that says so.
- If you start
- Links that lead to the network are refused before they are followed. Read tools, edit previews and a command's
executable/cwdnow check every existing folder on the way. A symlink or junction whose target is a UNC path or a mapped network drive is refused before Windows follows it. The same applies to a chain of such links, and to a configured folder.- Ordinary links that stay on your own drives still work.
- OneDrive cloud files and deduplicated files are treated as ordinary files.
- Checked live on the author's setup only. Ordinary reads through ChatGPT and Muse's
status(41 tools) still work. The network-link cases were tested with simulated links, not real network shares. - After updating, restart the Broker, its client and the bridge, then refresh the tools in ChatGPT. The ChatGPT tool list is unchanged.
This is a developer preview. It does not establish production acceptance.
Checking the download
SoraCommander-v0.3.0.zip holds the tagged tree, made with git archive. Text files have LF line endings, except .cmd and .ps1, which have CRLF. To check it, run this in PowerShell in the download folder:
(Get-FileHash .\SoraCommander-v0.3.0.zip -Algorithm SHA256).HashThe value must match the one in SHA256SUMS; letter case does not matter. GitHub's own "Source code" archives are not covered.
日本語
1つだけ、対応が要るかもしれない変更があります。 読み取り専用のMuseブリッジの既定の認証方式が、Tailscaleのノード識別になりました。
- 読み取り専用のMuseブリッジ:
--authの既定がtokenからtailscaleに変わりました。- 説明書のとおり
tools\start-muse-bridge-tailscale.cmdで起動している場合は、何も変わりません。 - これまで既定のトークンで使っていた場合は、
tools\start-muse-bridge.cmd --auth tokenのように--auth tokenを付けて起動してください。付けないと、そう案内する[HOLD]の行を出して止まります。
- 説明書のとおり
- ネットワークにつながるリンクは、たどる前に拒否します。 読み取りツール、編集のプレビュー、コマンドの
executable・cwdは、途中にある既存のフォルダを1つずつ確かめるようになりました。行き先がUNCパスや割り当てたネットワークドライブのシンボリックリンク・ジャンクションは、Windowsがたどる前に拒否します。リンクが続く場合も、許可フォルダそのものも同じです。- 自分のドライブの中にとどまる普通のリンクは、これまでどおり使えます。
- OneDriveのクラウドファイルや重複除去されたファイルは、普通のファイルとして扱います。
- 実機の確認は作者自身の環境だけです。ChatGPT経由の普通の読み取りとMuseの
status(41ツール)は動いています。ネットワークを指すリンクは模擬したリンクで試したもので、本物のネットワーク共有では試していません。 - 更新後はBroker・クライアント・ブリッジを再起動し、その後ChatGPTのツールを再読み込みしてください。 ChatGPTのツール一覧は変わりません。
これは開発者向けプレビューです。本番での受入を意味しません。
ダウンロードの確かめ方
SoraCommander-v0.3.0.zipは、タグの中身をgit archiveで固めたものです。テキストの改行はLFで、.cmdと.ps1だけCRLFです。ダウンロードしたフォルダでPowerShellから次を実行してください。
(Get-FileHash .\SoraCommander-v0.3.0.zip -Algorithm SHA256).Hash表示された値がSHA256SUMSの値と同じなら合っています(大文字・小文字は区別しません)。GitHubが自動で付ける「Source code」のアーカイブは対象外です。
v0.2.1
Changes since v0.2.0
A hardening release; please update.
- UNC and device paths are refused before they are touched. Read tools, edit previews and command
executable/cwdrefuse\\server\share\…,//…,\\?\…and\\.\…at once. Before this release, such a path could make Windows contact the named server first, which may send your Windows sign-in to it, before Sora Commander refused it. This applies through ChatGPT as well as through the Muse bridge. - Git file reads refuse a link or junction inside the repository before following it.
- Read-only Muse bridge:
- It no longer lists the DEV-only tools (file writes,
send_input,list_processes,get_config); it now has 41 tools. - It refuses to start without
allowed-roots.txt. - It closes WebSocket connections.
- It checks Tailscale's answers more strictly.
- Its default read-only token file is now under
%USERPROFILE%, like the exec token.
- It no longer lists the DEV-only tools (file writes,
- Found in a review by Muse and Grok, then checked against the code. Live checks were on the author's setup only.
- After updating, restart the Broker, its client and the bridge, then refresh the tools in ChatGPT. The ChatGPT tool list is unchanged.
This is a developer preview. It does not establish production acceptance.
Checking the download
SoraCommander-v0.2.1.zip holds the tagged tree, made with git archive. Text files have LF line endings, except .cmd and .ps1, which have CRLF. To check it, run this in PowerShell in the download folder:
(Get-FileHash .\SoraCommander-v0.2.1.zip -Algorithm SHA256).HashThe value must match the one in SHA256SUMS; letter case does not matter. GitHub's own "Source code" archives are not covered.
日本語
守りを固めるリリースです。更新してください。
- UNCパスとデバイスパスは、触る前に拒否します。 読み取りツール、編集のプレビュー、コマンドの
executable・cwdで、\\server\share\…・//…・\\?\…・\\.\…をすぐに拒否します。これまでは、拒否する前にWindowsが指定先のサーバーへ接続しに行き、Windowsのサインイン情報を送ってしまうおそれがありました。ChatGPT経由でもMuseブリッジ経由でも同じです。 - Gitのファイル読み取りは、リポジトリ内のリンクやジャンクションを、たどる前に拒否します。
- 読み取り専用のMuseブリッジ:
- 開発用のツール(ファイルの書き込み、
send_input、list_processes、get_config)を出さなくなり、ツールは41個になりました。 allowed-roots.txtが無いと起動しません。- WebSocketの接続は閉じます。
- Tailscaleからの応答の確認を厳しくしました。
- 読み取り用トークンの既定の置き場所を、exec用と同じ
%USERPROFILE%の下にしました。
- 開発用のツール(ファイルの書き込み、
- MuseとGrokのレビューで見つかり、コードで確かめたものです。実機の確認は作者自身の環境だけです。
- 更新後はBroker・クライアント・ブリッジを再起動し、その後ChatGPTのツールを再読み込みしてください。 ChatGPTのツール一覧は変わりません。
これは開発者向けプレビューです。本番での受入を意味しません。
ダウンロードの確かめ方
SoraCommander-v0.2.1.zipは、タグの中身をgit archiveで固めたものです。テキストの改行はLFで、.cmdと.ps1だけCRLFです。ダウンロードしたフォルダでPowerShellから次を実行してください。
(Get-FileHash .\SoraCommander-v0.2.1.zip -Algorithm SHA256).Hash表示された値がSHA256SUMSの値と同じなら合っています(大文字・小文字は区別しません)。GitHubが自動で付ける「Source code」のアーカイブは対象外です。
v0.2.0 developer preview
Changes since v0.1.9
- Read-only Muse bridge (optional, unofficial): an agent on your own Tailscale tailnet can read through Sora Commander. Only nodes you list by Tailscale StableID get in; file tools read only, commands are refused, and no approval window opens from the bridge. It can run beside the Broker. Command execution through the bridge is not offered in this release. Tested with Muse on the author's own setup only; whether another account's Muse can join its own tailnet the same way is not yet confirmed. Muse is a Meta product; this project is not affiliated with or endorsed by Meta. See docs/muse-bridge.md.
- One process per Owner journal. The Broker, its maintenance commands and the journal-using entry points take a per-logon lock before opening the journal, the output archive or the launch ledger. A second one stops with one
[HOLD]line and touches nothing (exit 6 for the Broker). - A malformed
--pipe-namenow stops the Broker with one[HOLD]line (exit 2) before it takes the lock or opens any storage. - After updating, restart the Broker and its client, then refresh the tools in ChatGPT. No tool was added or removed.
This is a developer preview. It does not establish production acceptance.
Checking the download
SoraCommander-v0.2.0.zip holds the tagged tree (3422099), made with git archive. Text files have LF line endings, except .cmd and .ps1, which have CRLF. To check it, run this in PowerShell in the download folder:
(Get-FileHash .\SoraCommander-v0.2.0.zip -Algorithm SHA256).HashThe value must match the one in SHA256SUMS; letter case does not matter. GitHub's own "Source code" archives are not covered.
日本語
- 読み取り専用のMuseブリッジ(任意・非公式):自分のTailscale tailnet内のエージェントから、Sora Commanderを通じて読み取れます。入れるのはTailscaleのStableIDで登録したノードだけで、ファイルツールは読み取りのみ、コマンドは拒否され、ブリッジから承認窓は開きません。Brokerと並べて動かせます。このリリースではブリッジ経由のコマンド実行は提供しません。Museで試したのは作者自身の環境だけで、別アカウントのMuseが同じ方法で自分のtailnetに参加できるかは未確認です。MuseはMetaの製品で、このプロジェクトはMetaと提携しておらず、推奨も受けていません。docs/muse-bridge.ja.mdを参照してください。
- Ownerのjournalは1プロセスだけが使います。 Broker、その保守コマンド、journalを使う入口は、journal・出力アーカイブ・起動台帳を開く前にログオン単位の鍵を取ります。2つ目は
[HOLD]を1行出して何も触らずに止まります(Brokerは終了コード6)。 - 形の正しくない
--pipe-nameは、鍵を取ったり保存先を開いたりする前に、[HOLD]を1行出して止まります(終了コード2)。 - 更新後はBrokerとそのクライアントを再起動し、その後ChatGPTのツールを再読み込みしてください。 ツールの追加・削除はありません。
これは開発者向けプレビューです。本番での受入を意味しません。
ダウンロードの確かめ方
SoraCommander-v0.2.0.zipは、タグ(3422099)の中身をgit archiveで固めたものです。テキストの改行はLFで、.cmdと.ps1だけCRLFです。ダウンロードしたフォルダでPowerShellから次を実行してください。
(Get-FileHash .\SoraCommander-v0.2.0.zip -Algorithm SHA256).Hash表示された値がSHA256SUMSの値と同じなら合っています(大文字・小文字は区別しません)。GitHubが自動で付ける「Source code」のアーカイブは対象外です。
v0.1.9 developer preview
Changes since v0.1.7
- Config Builder (
tools\scn_config_builder.py): an optional offline window forallowed-roots.txt,language.txtandtasks.json. It checks drafts with the Host's own startup code, shows the full contents before saving, backs up changed files and rechecks after saving. New folders start read-only; it never runs a task preset. Tested with automated tests only; not yet checked by hand on real machines. See docs/config-builder.md. - The help for
activity,request_status,review_statusandawait_command_resultnow starts with when to use each. No tool was added or removed. - The Codex job monitor now starts through hidden PowerShell instead of a VBS launcher.
- Clearer read-tool help and server instructions (published on main after v0.1.7, now part of a tagged release).
- After updating, restart the Broker and its client, then refresh the tools in ChatGPT.
This is a developer preview. It does not establish production acceptance.
日本語
- Config Builder(
tools\scn_config_builder.py):allowed-roots.txt・language.txt・tasks.jsonを画面で編集できる、任意のオフラインツールです。下書きはHostが起動時に使うのと同じコードで確認し、保存前に全文を表示し、変更するファイルをバックアップして、保存後にもう一度確認します。新しく追加したフォルダは「読むだけ」から始まり、タスクプリセットを実行することはありません。画面は自動テストだけで確認しており、実機での手動確認はまだです。docs/config-builder.ja.mdを参照してください。 activity・request_status・review_status・await_command_resultのヘルプの冒頭に、それぞれをいつ使うかを書きました。ツールの追加・削除はありません。- Codexジョブの監視窓は、VBSのランチャーを使わず、非表示のPowerShellで起動するようになりました。
- 読み取りツールのヘルプとサーバーの説明を分かりやすくしました(v0.1.7のあとにmainで公開済みの変更を、今回タグ付きのリリースに含めます)。
- 更新後はBrokerとそのクライアントを再起動し、その後ChatGPTのツールを再読み込みしてください。
これは開発者向けプレビューです。本番での受入を意味しません。
v0.1.7 developer preview
Developer preview. README · Install (English) · 導入手順(日本語)
Changes since v0.1.6
activityshows known operations and labelled IDs from the current run without an approval window; it shows only IDs, states and times.- Approval windows distinguish Reject (
DENIED) from no decision (TIMED_OUT). Closing with X now means no decision (reason=CLOSED); before v0.1.7, X counted as a reject. No answer in time givesreason=EXPIRED. ChatGPT reports and waits for your next instruction without resubmitting or asking for the window again. - If the window's answer cannot be confirmed (for example the window stopped responding), the result is now
ERRORwithNOT_STARTED: nothing ran, and it is no longer reported as an expiry.
Live-checked on 2026-11-13 with real windows through ChatGPT in Broker mode: command windows (Approve, Reject, X, no answer) and create_file (X, Approve). Other paths behave the same way in tests but have not been checked with real windows: no answer for create_file and the other DEV file tools, DEV send_input, the interactive second window, the text edit/create pilot, run_task and ogf_cue. These DEV checks do not establish production acceptance.
After updating: restart the Broker and its client, then refresh the tools in ChatGPT.
The DEV tool list with the optional edit/create pilot now contains 54 tools, and the tool help changed; visible counts depend on Host configuration.
Sora Commander is an independent project. It is not made, endorsed or supported by OpenAI. ChatGPT and Sora are products of OpenAI.
日本語
開発者向けプレビューです。activityで現在の実行で分かっている操作と種類を明記したIDを承認窓なしで確認でき、ID・状態・時刻だけを表示します。承認窓はReject(DENIED)と未決定(TIMED_OUT)を区別します。Xはv0.1.7より前の「却下」から未決定(reason=CLOSED)に変わり、時間内の無回答はreason=EXPIREDです。ChatGPTは再送や窓の再表示を要求せず、報告して次の指示を待ちます。窓の回答を確認できなかった場合(窓が応答しなくなった場合など)は、期限切れとしてではなくERRORとNOT_STARTEDを返します。何も実行されていません。
2026-11-13にBrokerモードでChatGPTを通じた実際の窓を確認しました。確認済みはコマンド窓(Approve、Reject、X、無回答)とcreate_file(X、Approve)です。他の経路はテストでは同じ動作ですが、実際の窓では未確認です。未確認の範囲はcreate_fileと他のDEVファイルツールの無回答、DEV send_input、対話型の2つ目の窓、テキスト編集・作成pilot、run_task、ogf_cueです。このDEV確認は本番受入を意味しません。
更新後はBrokerとそのクライアントを再起動し、その後ChatGPTのツールを再読み込みしてください。 任意の編集・作成pilot付きDEV構成では54ツールになり、ツールヘルプも変わりました。表示数はHost構成によります。
Sora Commanderは独立したプロジェクトです。OpenAIが作成・推奨・サポートしているものではありません。ChatGPTとSoraはOpenAIの製品です。
v0.1.6 developer preview
Developer preview. Not accepted for production use. Read the README before installing. Install steps: English / 日本語.
Changes since v0.1.5
- Setup check.
.venv\Scripts\python.exe tools\scn_doctor.pychecks your install in one go and says what to fix: Windows and Python, packages, where the copy lives,allowed-roots.txt,language.txt,tasks.json,ogf-bridge.json, the tunnel program, settings and key, and whether the Broker is running now.- Read-only: it starts nothing, opens no window, uses no network and changes no file. It checks only that the tunnel key and YAML exist and never opens them.
- One line per check:
[PASS],[WARN]or[HOLD], with a pointer to the INSTALL section when something needs fixing. Exit code 1 if there is a[HOLD]. - English or Japanese, chosen like the approval window;
--lang enor--lang jaoverrides.
- README shows the Glama card badge and links an optional paid beginner's guide. The software and the install docs here stay free.
No tool was added or changed for ChatGPT, so no tool refresh is needed. No restart is needed either.
Sora Commander is an independent project. It is not made, endorsed or supported by OpenAI.
導入の状態を 1 コマンドで確かめる tools/scn_doctor.py を追加しました。読み取り専用で、何も起動せず、トンネルのキーや設定の中身も開きません。問題があれば [WARN] / [HOLD] と、INSTALL のどこを見ればよいかを表示します。日本語でも英語でも表示できます(--lang ja / --lang en)。
v0.1.5 developer preview
Developer preview. Not accepted for production use. Read the README before installing. Install steps: English / 日本語.
Changes since v0.1.4
- Read-only Git tools, no approval window.
git_snapshot,git_diff,git_log,git_showandgit_remote_checkread a repository in an allowed folder. Repository hooks, filters and configured programs are disabled. Onlygit_remote_checkuses the network, with prompts and credential helpers off, and it returns fixed reasons such asNO_UPSTREAMorREMOTE_READ_FAILED. - Task presets. Write fixed commands by hand in
%USERPROFILE%\.config\sora-commander\tasks.json.list_tasksshows them without a window;run_taskruns one by name and opens the approval window every time. A missing file turns presets off; invalid content stops startup with[HOLD]. No tool can write or reload the file. - Image reads.
read_image_filereturns a PNG or JPEG (up to 4 MiB) from an allowed folder as an image item, without a window. ChatGPT must callimage(item)on it to see the picture.tools/scn_capture_window.pycaptures one window and is meant to run as a task preset, so every capture is approved. - Optional companion cue.
ogf_cuesends one bounded cue (emotion, action, gaze, short message) to a companion app's Bridge inbox, with approval every time. It is off unless you create%USERPROFILE%\.config\sora-commander\ogf-bridge.json. - The tool list with the optional edit/create pilot now has 53 tools; the visible count depends on your Host settings.
Restart the Broker and its client after updating.
Sora Commander is an independent project. It is not made, endorsed or supported by OpenAI.
読み取り専用の Git ツール(承認窓なし)、手で書いたコマンドを名前で実行するタスクプリセット(毎回承認)、PNG/JPEG の画像読み取り、任意のコンパニオン連携 ogf_cue(設定したときだけ有効・毎回承認)を追加しました。更新後は Broker とクライアントを再起動してください。
v0.1.4 developer preview
Developer preview. Not accepted for production use. Read the README before installing. Install steps: English / 日本語.
Changes since v0.1.3
- Approval windows in English or Japanese. Until now they were always Japanese. By default they now follow the Windows display language: Japanese Windows shows Japanese, any other language shows English. To choose yourself, put one line,
enorja, in%USERPROFILE%\.config\sora-commander\language.txt. Any other content stops startup with[HOLD]. The Broker prints[INFO] Window language: ...at startup. The language changes only the window text, never what is checked or approved. - File review windows explain expiry. The notice now says that Close or Reject declines on purpose, that an unanswered window that runs out of time is not your rejection, and that neither changes any file. The result reported to ChatGPT is still
DENIEDfor both. - If the Japanese caution text is missing, the window falls back to verified English; if the English text is missing or changed, the caution fails closed.
INSTALLnow also warns that files in every allowed folder, includingread:folders, are read without a window and sent to ChatGPT.- Inactive development candidates for a language settings screen are included but not connected.
Restart the Broker and its client after updating.
Sora Commander is an independent project. It is not made, endorsed or supported by OpenAI.
承認窓を英語でも表示できるようになりました。何も設定しなければ Windows の表示言語に合わせます(日本語の Windows なら日本語、それ以外は英語)。%USERPROFILE%\.config\sora-commander\language.txt に en か ja を 1 行書けば、自分で選べます。更新後は Broker とクライアントを再起動してください。
v0.1.3 developer preview
Developer preview. Not accepted for production use. Read the README before installing. Install steps: English / 日本語.
Security fixes since v0.1.2
Please update. These came from a static security review.
- The approval window could be rewritten by one approved edit. File tools now refuse to create, edit or move files inside the running Sora Commander install (its package folder,
toolsandpyproject.toml). At startup, the approval-window scripts and the files they load are hashed; before each window opens they are checked again, and on any change no window opens and the request fails. - Arguments to
.bat/.cmdfiles. Windows runs these throughcmd.exe, so an argument such astest&calc.execould start a second program while the window showed one argument. Arguments containing& | < > ^ % ! "or line breaks are now refused for.batand.cmd. - PowerShell is started by its full System32 path.
- New cautions in the approval window for
.bat/.cmd, shells started throughconhost.exe, andpython -ccode that mentionspush. SECURITY.mdnow also lists: files in allowed folders are read without a window (the deny list checks names only), approved command output goes to ChatGPT without being shown, and a shared ChatGPT connector.
Restart the Broker and its client after updating.
Sora Commander is an independent project. It is not made, endorsed or supported by OpenAI.
セキュリティ修正版です。更新してください。承認した編集 1 回で承認窓を書き換えられる問題と、.bat / .cmd に渡す引数で別のプログラムが動く問題を直しました。更新後は Broker とクライアントを再起動してください。