Repository navigation
PanelOS 0.0.2
Boot
- Super fast boot: about 12 s from power on to the dashboard (stock firmware: about 53 s). The stock bootloader phase dropped from about 45 s to about 2.5 s.
- PanelOS logo in the bootloader: the stock U-Boot shows
assets/bootlogo.bmp(the first frame of the boot animation) at the brightness of the animation. - Chain loader in front of the kernel (
tools/chainload/, packed bytools/arm64_chain_pack.py): the stock U-Boot gets the stock device tree, the kernel its own one, with the memory layout, command line, initramfs location and serial number carried over. - Watchdog: the chain loader starts the SoC watchdog and the kernel feeds it; a boot that hangs early resets the panel by itself.
- The backlight starts at 180 (bootloader, kernel and boot animation alike), no jump in brightness.
Panel app
- The UI takes over the display only when it has current content: the clock is set and the first Home Assistant states are in. The boot animation's light band shows the wait.
- The clock comes from Home Assistant until NTP has set it, so it is right on the first screen, also on networks without internet access.
- While the network is not up yet, the Home Assistant connection is retried every 0.5 s instead of with a growing delay.
- Voice satellite: new sensors Wake level, Wake SNR and Wake score, sent with every wake word before the voice run, so Home Assistant can let the satellite that heard best answer.
Install and build
- The build now takes the stock device tree from a panel backup (
resourcepartition,tools/make_uboot_dtb.sh); the install guide backs up the panel before the build (steps 5–7 reordered).
Documentation
docs/hardware.md: the Zigbee module (EFR32MG21, EmberZNet 6.10.1 NCP, EZSP 8, Gecko Bootloader 1.12 with serial XMODEM upload) and the SoC console (UART2 TX on GPIO1_D2 and GPIO2_B4, not broken out to any pad).docs/bringup.md: chain loader, watchdog and boot times;docs/decisions.md: the stock-device-tree decision.
Full list of what 0.0.1 already did: CHANGELOG.md.