ro-mono-303 0.2.0 and ro-drums-909 0.2.0 (beta)

ro-drums-909 0.2.0, the first release: the Roland TR-909 Rhythm Composer. https://lemusdev.org/ro-drums-909

• The original sequencer program (version 4.0) on an emulated CPU, and the voicing board modelled part by part from the service notes; the hi-hat, crash and ride play their samples from their own ROMs.
• Without the program ROM it runs in voice mode: the voices from MIDI, no sequencer.
• With the version 1.0 program ROM, a new instance holds the factory patterns and song.
• SYNC follows the DAW's transport (MIDI clock, start, stop, song position); MIDI out; the ten MULTI OUTs.
• SERVICE: the boards by serial number, from the first units to the late board, the clap's trimmer TM and a scope.
• User guide: https://lemusdev.org/ro-drums-909/guide

ro-mono-303 0.2.0

• State in the top bar has Reset…: the instance as a new one, every control and SERVICE trim at its default.
• FACTORY TRIM is gone from SERVICE: State, Reset… puts the trims back.
• A key held down by a right-click stays down when its computer key is let go.
• Every button in the top bar has a tooltip.
• The ROM prompt says what the CPU ROM holds, and what the 303 keeps and loses without it.
• BETA next to the name in the top bar.

Both are betas. The installers aren't signed: https://lemusdev.org/download#installing

ro-mono-303 0.1.5 (beta)

• Artwork: an SVG or PNG of your own for each place on the panel (maker, name, model, tagline), in artwork/tb303/ in the ROM folder, drawn as it looks. A tb303.svg still works.
• ROMs in the top bar shows the ROM folder, the CPU ROM and the artwork with their full paths, and changes or rescans the folder. In voice mode it is Add CPU ROM….
• State in the top bar saves the instance to a file and loads one, the standalone app's saved states too.
• MIDI: a note overlapping one of the same pitch slides into it instead of cutting it, and with the sustain pedal down every note slides.
• The Mac installer runs on macOS 11 and later again: 0.1.0 to 0.1.4 needed the newest macOS.
• About links to the forum, lemus.discourse.group.
• No blank tb303.svg is written into the ROM folder any more, and an untouched one is taken out.

The installers aren't signed: https://lemusdev.org/download#installing

ro-mono-303 0.1.4 (beta)

• From this version on, a new release shows what's new in a window: Download, Remind me later (a week) or Skip this version.
• About shows the ROM folder in use, with a link that opens it.
• After Locate ROM, the bar says which folder the ROM went into.
• Changing the ROM folder removes the old folder's tb303.svg if it is still the untouched blank.
• The status bar names a panel key held down by a right-click. FUNCTION does nothing while TAP is held, as on the TB-303.

The installers aren't signed: https://lemusdev.org/download#installing

ro-mono-303 0.1.3 (beta)

• The installers include the AGPLv3 (LICENSE.txt) and NOTICES.txt; the About box names the licence and links this source.

The installers aren't signed: https://lemusdev.org/download#installing

ro-mono-303 0.1.2

• No CLEAR MEMORY in the bar.
• A right-click holds a panel key down until it's clicked again.
• The ROM prompt comes back if the ROM goes missing.

The installers aren't signed: https://lemusdev.org/download#installing