DEYROUTE 0.3.3-edge.93 (development build)

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.3-edge.93/install.sh) --version 0.3.3-edge.93

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from 59bc710 (Linux amd64 and arm64, static binary).

branch: dev

v0.3.2

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/latest/download/install.sh)

This release exactly: bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.2/install.sh) --version 0.3.2

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new in 0.3.2

Added — Telegram in the security audit

• deyroute security audit has a new check telegram: a warning while
  Telegram notifications are on, because every message hands the bot token
  to an online node; ok when they are off. With Telegram on, the audit is
  no longer clean (DR-27).

Changed — a neutral name for the internal CA

• A new internal CA (at setup or security rotate-ca) is named
  <hub name> CA and has no organization; before, it was
  DEYROUTE CA <hub name> with organization DEYROUTE. The hub sends the
  CA with its certificate to every client of the control port. Existing
  CAs keep their name until rotate-ca; nothing breaks either way.
  Hub and node certificates keep the organization DEYROUTE for 0.3.x
  peers; this release already accepts them without it, so a later minor
  release can drop it (DR-26).

Added — lab scenario for a node replacement

• Lab S39: the operator replaces a tunnel's primary node (join the new
  node, tunnel edit --node NEW --yes, node remove OLD --yes). The
  tunnel carries traffic through the new node 7.2 s after the edit, the old
  node runs no tunnel unit and leaves @nodes (DR-23).

Added — the client IP on frp rungs

• With a tunnel's advanced.proxy_protocol: true, every frp/* rung now
  sends a PROXY protocol v1 line before the data of each TCP port, so the
  service on the node sees the user's address (client IP preserved).
  UDP ports stay masked. The service must accept PROXY protocol. The
  node's echo, probe echo and speed helpers skip the line; a node of an
  older release (no capability proxy-header) gets the rung without it
  (DR-21).

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

DEYROUTE 0.3.2-edge.85 (development build)

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.2-edge.85/install.sh) --version 0.3.2-edge.85

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from 9985467 (Linux amd64 and arm64, static binary).

branch: dev

v0.3.1-edge.65

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.1-edge.65/install.sh) --version 0.3.1-edge.65

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from 0a92ecb (Linux amd64 and arm64, static binary).

branch: main

v0.3.1

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/latest/download/install.sh)

This release exactly: bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.1/install.sh) --version 0.3.1

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new in 0.3.1

Added

• deyroute setup --public-ip A.B.C.D and --public-ip6 X store exactly
  that hub address (canonical form) and skip the wizard's IP question;
  --allow-private-ip accepts a private, CGNAT or loopback address for test
  labs (never a link-local one). A refused address is DEY-C013 before any
  setup step; the three flags are refused with --role node and on
  deyroute join. setup --json adds public_ip_source (flag,
  detected or wizard). Without the flag nothing changes: a private
  detection still only warns (DEY-I021), so automation on a NAT or
  floating-IP server must pass --public-ip (docs/en/install.md, lab S01,
  DR-07).
• deyroute join --sysctl off|balanced|auto (default balanced; when
  given, the kernel question is not asked; off writes nothing under
  /etc/sysctl.d) and --reserve-ports LIST (ports and ranges, the flag
  repeats, at most 64 entries, at least 1024 ephemeral ports left free;
  with off it is DEY-C013). join --json adds reserved_ports (never
  null). The entries are kept in /var/lib/deyroute/reserved-ports and
  reserved again by every profile the node applies except off
  (docs/en/join.md, docs/en/tuning.md, lab S23, DR-09).
• A node joined with --sysctl off, or whose owner answered no to the
  kernel question, refuses the hub's kernel tuning (optimize apply and
  optimize auto) with the new DEY-N052; a revert to off still runs.
  The switch is the root-only marker /var/lib/deyroute/hub-tuning-off: to
  lift it, remove it on the node and re-apply the hub's profile as
  deyroute optimize status shows it. Nodes joined with an earlier version
  keep following the hub (QUESTIONS.md C.65, DR-09).

Changed

• The balanced and aggressive profiles a node applies, at join or
  pushed by the hub, now also reserve the backend control range
  30000-31999 in net.ipv4.ip_local_reserved_ports, as auto already
  did (a set union: existing reservations stay). Migration: on the hub,
  re-apply the profile deyroute optimize status shows (deyroute optimize auto on an auto hub, otherwise deyroute optimize apply --profile <that profile>) so the online nodes reserve the range now (QUESTIONS.md C.64,
  DR-09).

Fixed

• deyroute setup --help said --yes applies the balanced kernel profile;
  it applies the automatic profile, and the help now says so (deyroute optimize status shows it). The hidden join --yes keeps its own text: a
  join applies balanced (docs/en/install.md, DR-19).
• The sysctl backup recorded the live union of
  net.ipv4.ip_local_reserved_ports as deyroute's value, so a later apply
  followed by a revert or uninstall also removed a port another program
  had reserved in between. It now records only the entries deyroute
  requested; the kernel write is still the union (DR-09).
• deyroute optimize check no longer reports the reserved ports as drift
  when another program adds or removes its own reservation; only a port
  deyroute wants that is missing counts (DR-09).

Added — the firewall table comes back by itself

• The hub and every node now check their table inet deyroute every 60
  seconds and apply it again when it is missing or changed (nft flush ruleset by an admin or a provider script, ufw reload on some systems,
  another tool). The new key security.firewall_reassert_s sets the
  interval (10-3600 seconds, 0 = off; absent = 60). A node checks only
  while it has NAT rules (WireGuard/AmneziaWG rungs, Hysteria2 port
  hopping) and no longer keeps a flushed table gone until its rules
  change. Nothing is checked with security.firewall_managed: false. The
  hub records the warning event firewall_reapplied (reason missing or
  drift, at most once per 10 minutes per reason; Telegram sends it when
  hub.notify.telegram.events names it); a node writes the same warning
  to node.log (docs/en/security.md, docs/en/monitoring.md, lab S37).
• Releases before 0.3.1 do not know security.firewall_reassert_s or
  firewall_reapplied in hub.notify.telegram.events: while either is
  set, deyroute update --rollback and update --version to such a
  release are refused (DEY-S011), and a node refuses a self.update to
  such a release while its own config.yaml sets the key.

Changed — unknown control-port sources are limited per address

• A node whose public IP changed reconnects through the admission for
  unknown sources. That admission was one global bucket of 6 new
  connections per minute, which a single scanner could use up. Each
  source address now has its own budget of 3 per minute (burst 3; the
  dynamic sets @ctl_unknown4/@ctl_unknown6, 10-minute buckets) and all
  unknown sources together at most 30 per minute. New keys
  security.unknown_control_rate_per_source (default 3/minute) and
  security.unknown_control_rate (default 30/minute) take nft rates.
  When nft or the kernel refuses the per-source form, the hub applies the
  earlier single rule at unknown_control_rate, keeps it until it
  restarts and logs nft refused the per-source limit of the control port once (docs/en/security.md, lab S27).
• Migration: nothing to do; the hub applies the new rules at its next
  start. While either new key is set, a rollback below 0.3.1 is refused
  (DEY-S011).

Fixed — port check behind a per-source limit

• deyroute port check read an nftables rule of another firewall that
  adds the source to a set with a per-element limit (add @set { ip saddr limit rate … }, meter) as never matching, so a port behind it was
  reported blocked; it now counts as a rate-limited accept, like
  limit rate … accept.

More in the full changelog.

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

DEYROUTE 0.3.1-edge.83 (development build)

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.1-edge.83/install.sh) --version 0.3.1-edge.83

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Added

• deyroute setup --public-ip A.B.C.D and --public-ip6 X store exactly
  that hub address (canonical form) and skip the wizard's IP question;
  --allow-private-ip accepts a private, CGNAT or loopback address for test
  labs (never a link-local one). A refused address is DEY-C013 before any
  setup step; the three flags are refused with --role node and on
  deyroute join. setup --json adds public_ip_source (flag,
  detected or wizard). Without the flag nothing changes: a private
  detection still only warns (DEY-I021), so automation on a NAT or
  floating-IP server must pass --public-ip (docs/en/install.md, lab S01,
  DR-07).
• deyroute join --sysctl off|balanced|auto (default balanced; when
  given, the kernel question is not asked; off writes nothing under
  /etc/sysctl.d) and --reserve-ports LIST (ports and ranges, the flag
  repeats, at most 64 entries, at least 1024 ephemeral ports left free;
  with off it is DEY-C013). join --json adds reserved_ports (never
  null). The entries are kept in /var/lib/deyroute/reserved-ports and
  reserved again by every profile the node applies except off
  (docs/en/join.md, docs/en/tuning.md, lab S23, DR-09).
• A node joined with --sysctl off, or whose owner answered no to the
  kernel question, refuses the hub's kernel tuning (optimize apply and
  optimize auto) with the new DEY-N052; a revert to off still runs.
  The switch is the root-only marker /var/lib/deyroute/hub-tuning-off: to
  lift it, remove it on the node and re-apply the hub's profile as
  deyroute optimize status shows it. Nodes joined with an earlier version
  keep following the hub (QUESTIONS.md C.65, DR-09).

Changed

• The balanced and aggressive profiles a node applies, at join or
  pushed by the hub, now also reserve the backend control range
  30000-31999 in net.ipv4.ip_local_reserved_ports, as auto already
  did (a set union: existing reservations stay). Migration: on the hub,
  re-apply the profile deyroute optimize status shows (deyroute optimize auto on an auto hub, otherwise deyroute optimize apply --profile <that profile>) so the online nodes reserve the range now (QUESTIONS.md C.64,
  DR-09).

Fixed

• deyroute setup --help said --yes applies the balanced kernel profile;
  it applies the automatic profile, and the help now says so (deyroute optimize status shows it). The hidden join --yes keeps its own text: a
  join applies balanced (docs/en/install.md, DR-19).
• The sysctl backup recorded the live union of
  net.ipv4.ip_local_reserved_ports as deyroute's value, so a later apply
  followed by a revert or uninstall also removed a port another program
  had reserved in between. It now records only the entries deyroute
  requested; the kernel write is still the union (DR-09).
• deyroute optimize check no longer reports the reserved ports as drift
  when another program adds or removes its own reservation; only a port
  deyroute wants that is missing counts (DR-09).

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from 98b4cf2 (Linux amd64 and arm64, static binary).

branch: dev

DEYROUTE 0.3.1-edge.66 (development build)

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.1-edge.66/install.sh) --version 0.3.1-edge.66

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Security — tunnel logs

• A directory found at a name the rotation or the preparation of a tunnel
  log writes is renamed <name>.removed-<16 hex digits> at once and
  deleted in the background, at most 10000 entries per directory and
  minute, so neither the start of a transport nor the start of a service
  waits for it.
• The hub and the node prepare a tunnel log only in a safe
  /var/log/deyroute/tunnels: root's own directory with the sticky bit,
  or closed to its group and others. At a link, in a directory of another
  user or in a group-writable one without the sticky bit, the transport is
  not started and the hub or node answers DEY-X022, whose why names the
  reason; the services log cannot make the tunnel log directory sticky
  for such a directory. Fix:
  chown root:deyroute /var/log/deyroute/tunnels && chmod 1770 /var/log/deyroute/tunnels
  (the services make a root-owned directory sticky themselves when they
  start).
• deyroute logs and the log lines shown with a failed start (DEY-B003)
  no longer read a file with a second hard link at a log name
  (docs/en/security.md, lab S36, QUESTIONS.md C.56).

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from 4ba6810 (Linux amd64 and arm64, static binary).

branch: dev

DEYROUTE 0.3.0-edge.62

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/latest/download/install.sh)

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from c47dde4 (Linux amd64 and arm64, static binary).

branch: main

v0.3.0

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/latest/download/install.sh)

This release exactly: bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.0/install.sh) --version 0.3.0

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new in 0.3.0

Security — tunnel logs

• The hub and the node rotate the tunnel logs in /var/log/deyroute/tunnels
  as root. The rotation no longer follows symbolic links and never writes
  through a file name that the backends' user deyroute can create first:
  a *.log that is a link, not a regular file or has a second hard link is
  skipped, the copy is staged in the root-only /var/lib/deyroute/tmp
  (0700, created when needed), and anything else found at a name the
  rotation writes is removed. Each case is logged once per file and reason
  as the warning tunnel log rotation refused in hub.log or node.log
  (docs/en/security.md, lab S36).
• /var/log/deyroute/tunnels is created as root:deyroute with mode 1770
  (sticky) by the installer, deyroute setup and the services, which
  created a missing one as root:root 0750 before. The backends' user can
  still add files there but can no longer remove or rename root's live and
  rotated logs (QUESTIONS.md C.48).
• Migration: on a server installed before, deyroute update is enough.
  The hub and node services add the sticky bit to an existing
  /var/log/deyroute/tunnels that belongs to root when they start (they
  never remove a bit, and log tunnel log directory made sticky). Running
  the installer again (it repairs and keeps the configuration) or
  chown root:deyroute /var/log/deyroute/tunnels && chmod 1770 /var/log/deyroute/tunnels
  also works. Check it with stat -c '%a %U:%G' /var/log/deyroute/tunnels
  (1770 root:deyroute).
• Before the hub or a node starts a transport, and for every tunnel when
  the service starts, <tunnel>.log is made root's regular file with a
  single link: systemd opens it as root for the transport's output.
  Anything else found at that name is removed, an empty log (0644) is
  created, and the warning tunnel log replaced is logged once per file
  and reason (symlink, not_regular, hardlink or owner) in
  hub.log or node.log. To free space, empty a live tunnel log
  (: > <tunnel>.log); do not delete it (docs/en/security.md, lab S36,
  QUESTIONS.md C.56 and C.57).
• deyroute logs and the log lines shown with a failed start
  (DEY-B003) read a tunnel log only when it is a regular file. They no
  longer follow a link or wait on a FIFO at a log name: such a name shows
  no lines on the hub, and a node answers DEY-X022.
• A directory found at a name the rotation or the preparation of a tunnel
  log writes is renamed <name>.removed-<16 hex digits> at once and
  deleted in the background, at most 10000 entries per directory and
  minute, so neither the start of a transport nor the start of a service
  waits for it.
• The hub and the node prepare a tunnel log only in a safe
  /var/log/deyroute/tunnels: root's own directory with the sticky bit,
  or closed to its group and others. At a link, in a directory of another
  user or in a group-writable one without the sticky bit, the transport is
  not started and the hub or node answers DEY-X022, whose why names the
  reason; the services log cannot make the tunnel log directory sticky
  for such a directory. Fix:
  chown root:deyroute /var/log/deyroute/tunnels && chmod 1770 /var/log/deyroute/tunnels
  (the services make a root-owned directory sticky themselves when they
  start).
• deyroute logs and the log lines shown with a failed start (DEY-B003)
  no longer read a file with a second hard link at a log name
  (docs/en/security.md, lab S36, QUESTIONS.md C.56).

Security — per-backend privilege allowlist

• A node now checks every backend unit the hub sends against a list of
  privileges built into its binary. Only wireguard and awg run as root,
  with CAP_NET_ADMIN and AF_NETLINK. wireguard may relax
  ProtectKernelTunables, and awg may also write to /run/amneziawg.
  rathole may relax MemoryDenyWriteExecute. The node side of
  direct/haproxy may open AF_NETLINK. Every other backend runs as user
  deyroute with CAP_NET_BIND_SERVICE only. No backend may relax
  NoNewPrivileges or the capability bounding set, or get a writable path
  its entry does not list.
• A unit that asks for more is refused: the node answers DEY-N050 and names
  the field. The hub checks its own units against the same list before it
  writes them (DEY-X034). In both cases only that rung is skipped, with the
  code; the other rungs keep working. Every unit DEYROUTE's own backends
  render passes the check, so a working install does not change. The list
  is in docs/en/security.md (Tunnel processes).

Security — nodes install only what a signed release proves

• A node no longer installs whatever its hub serves. When it follows the
  hub's version, the hub passes on the signed files of its release
  (SHA256SUMS, SHA256SUMS.minisig, the archive) and the node checks
  them with the release key built into its own binary: the signature, that
  the release is exactly the announced version, the checksum of the
  archive, that the archive holds a single regular file deyroute (at most
  200 MB, nothing outside its directory), and that this binary checks
  signed updates itself (deyroute --json version says
  "signed_update": true). Anything else is refused with DEY-S001;
  nothing is installed and the node keeps its version
  (docs/en/update-uninstall.md, "How the nodes follow"; lab S19, S41).
• A node installs a backend only in a version that a signed manifest pins:
  the version, download address and sha256 for its architecture must be
  those of the manifest built into it, or of a manifest the hub sends with
  a signature the node checks itself (the hub's override, or the manifest
  of the hub's own release when the node runs another build). Anything else
  is refused with DEY-N050 before a download. A version already installed
  exactly as pinned is kept without a manifest (QUESTIONS.md C.62;
  "Backends on the nodes"; lab S20, S21).
• deyroute update manifest now keeps the signature as
  /etc/deyroute/backends.yaml.minisig next to the override; both are in
  backups. An override saved by an earlier build has no signature: the hub
  fetches a matching one at start and every 10 minutes, and until then its
  nodes install only the versions built into them (warning "the backend
  manifest override has no valid signature …"; fix:
  deyroute update manifest).
• The hub keeps the signed release of its version for its nodes in
  /var/lib/deyroute/bin/<version>/: deyroute update and the installer
  (also with --local) leave it there, and a hub without it downloads it
  the first time a node needs it (through a node first). The installer
  keeps it on every server it installs, nodes included (QUESTIONS.md
  C.60). deyroute doctor lists it as "signed release kept for the
  nodes".
• Migration: update the hub first. A node of this version refuses the
  update of a hub of an earlier build (DEY-S001, "update the hub first")
  and keeps running; nodes of earlier builds update from a new hub as
  before. After deyroute update --version or --rollback on the hub to
  an earlier build, the nodes keep their version. A hub on a development
  build has no signed release: its nodes refuse with DEY-S012.

Added — signed updates

• DEY-S012 "Hub runs an unsigned development build".
• node.allow_unsigned_updates in a node's config.yaml (default false,
  written only when true; for test labs only): that node takes the hub's
  binary without a signature, from a development build or from an earlier
  hub. It does not apply to backends. While it is set, the node refuses to
  install a release older than both itself and 0.3.0 (DEY-S011, every
  older 0.3.0-edge.N included) (QUESTIONS.md C.58).
• deyroute --json version gains "test_key" (true only for a lab build
  that trusts a second, throwaway signing key; both release paths refuse to
  publish such a binary) and "signed_update": true (docs/cli-json.md).

Changed — the automatic update is off by default

• The automatic update is now off by default (spec section 5: an update
  never runs without asking). Its switch moved from the state database,
  which no backup contains, to config.yaml as hub.auto_update: true
  (written only when on), so a backup keeps it and a restored hub has it
  again. deyroute update auto on|off sets it after an automatic backup,
  deyroute --json update auto adds "source": "config", and
  deyroute setup --auto-update on|off (default off) chooses it at
  setup. A hub that ran an earlier build records the event
  auto_update_default_off once and shows "automatic update is now off by
  default; turn it on with: deyroute update auto on" on the dashboard for 7
  days while it is off. The switch is also still written where earlier
  builds read it, so a rollback to one of them keeps it as it was.
• Migration: a hub that relied on the old default no longer installs
  releases by itself; run deyroute update auto on once to keep that.
• While hub.auto_update is set, deyroute update --rollback and
  deyroute update --version to a release before 0.3.0 (every
  0.3.0-edge.N included) are refused with DEY-S011; run
  deyroute update auto off first. The rollback guard now compares each
  newer config.yaml key with the first release that knows it (DEY-S011
  names both), never refuses --version to a release that is not older
  than the running one, and trusts the recorded version of
  deyroute.prev only...

DEYROUTE 0.3.0-edge.61 (development build)

Install on the hub (Iran server) — نصب روی هاب (سرور ایران):

bash <(curl -fsSL https://github.com/localroot4/DeyRoute/releases/download/v0.3.0-edge.61/install.sh) --version 0.3.0-edge.61

Already installed? Run deyroute update on the hub (the nodes follow).
قبلاً نصب کرده‌اید؟ روی هاب deyroute update بزنید (نودها خودشان دنبال می‌کنند).

What's new

Full changelog · راهنمای فارسی · English guides

Verify

SHA256SUMS is signed with minisign; the installer and deyroute update check it before anything is installed. Public key: RWQtE2Hu1KwstgupEuPAWy+J2tiIgFVTIcReWI+Qh+yGMY3s2xWpyMuO

Built from fd6c974 (Linux amd64 and arm64, static binary).

branch: dev