Skip to content

BlochSimulator v2.9.6

Choose a tag to compare

@github-actions github-actions released this 30 Oct 12:07
· 27 commits to main since this release

Added

  • Reconstruction Explorer: repetitions are browsed by clicking the time course
    or stepping the frame bar, and metabolites are labelled with colours and
    contrast. Voxel plots of echo trains (EPSI, MGE) show the complex echo train
    ("Echoes") and its Fourier transform ("Spectrum"). The voxel plot has mode
    buttons for Spectrum, FID and Time course, so CSI switches without the
    settings column.
  • Explorer shows FID and spectrum for unencoded acquisitions such as the
    internal single pulse instead of an empty reconstruction.
  • Spiral reconstruction in the Reconstruction Explorer with density-compensated
    NUFFT, CG-NUFFT or linear gridding, optionally on k - Δk for the gradient
    errors of the k-space tab.
  • k-Space Trajectory tab in the sequence workspace: k-space per readout or
    frame, gradient/RF/ADC timeline, k(t), sampling PSF, and gradient delay, scale
    and eddy-current settings applied live against the ideal trajectory.
  • Spiral trajectory designer ("Design…" next to the spiral revolutions) with
    gradient and slew limits of the imaged nucleus, the gridding PSF, Apply to the
    sequence and Export as .npz.
  • nufft.py with a Kaiser–Bessel NUFFT, Pipe–Menon density compensation and CG
    reconstruction; spirals without a declared acquisition are detected from the
    trajectory. The export notebooks explain which reconstruction fits each
    readout and rerun spiral and radial reconstructions
    (spiral_acquisition_from_metadata, reconstruct_spiral_frames).
  • PSF Analysis handles 2D spiral frames (point-source signal gridded with the
    Pipe–Menon weights) and the gradient-error modes of the k-space tab.
  • Phantom designer: a "Simulated region" tab simulates only part of the phantom
    (FOV around the isocentre and a ppm range), the default sphere is editable,
    and a warning shows when the sequence FOV reaches beyond the simulated phantom
    FOV.
  • Ideal-crusher banner when a generated sequence runs with gradient spoiling.
  • Bruker loader reads the applied gain (ACQ_CalibratedRG) and warns below
    RG 10; SNR budget flags whole-object FID or brightest voxel below SNR 1 with
    the averaging needed for SNR 3.

Changed

  • The Geometry tab is called Setup and zooms freely. Phantom + B1 is a sub-tab of
    both Phantom and B1 Fields.
  • Sequence settings are shown per tab and hidden by default. Tab bars scroll
    with two-finger gestures, and trackpad slice scrolling accumulates before a
    slice step.
  • The "Sequence parameters changed" notice in Setup appears only when FOV,
    matrix, slices or offsets change, not for timing edits such as TE or TR.
  • Analysis plots (PSF, spin probe, signal, Explorer) cannot be zoomed beyond the
    data range. PSF plots are static.
  • SS-bSSFP defaults to the SLR pulse with sharpness 1.
  • The default scanner profile has gradient limits of 400 mT/m and 3000 T/m/s.
    The advanced 13C bSSFP builders default to 400 mT/m and 4000 T/m/s.

Fixed

  • Sequence gradients use the gyromagnetic ratio of the imaged nucleus. 13C
    sequences had about four times the physical gradient limit, and unknown
    nuclei are rejected.
  • Readout ramps are at least the ADC dead time, and bSSFP keeps a centred ADC
    at any bandwidth.
  • ADC time tolerance scales with scan duration, so long multi-repetition scans
    no longer fall back to a wrong Cartesian reconstruction.
  • Loaded results saved without an acquisition layout get the inferred one, so
    spirals saved before undeclared-spiral detection no longer show as a 1×N
    image.
  • PSF Analysis no longer fails with NoneType after switching the k-space
    plane.
  • Noise scans with non-white noise use the spectral-median sigma.
  • The PSF k-space modulation plot keeps a minimum y range.
  • Sequence preset files serialise numpy arrays, and pyqtgraph image items guard
    against degenerate levels.
  • ParaVision exports write date stamps with English day and month names
    whatever the locale of the exporting machine.