Skip to content

v1.1.8

Latest

Choose a tag to compare

@github-actions github-actions released this 17 Nov 12:51
· 14 commits to main since this release

OscarWatch Tracker v1.1.8 Release Notes

A big thank you to our newest supporters, Steve N9IP, Lars SM0TGU, and Jordi EB3JT. Your support keeps OscarWatch moving, and thank you as well to everyone who has already donated.

Welcome to version 1.1.8. This one is for the dual-radio desk, the CW operator, and anyone who woke up to find SO-131 on the map with no modes: satellite radios as Dual radio legs, live CW decode and a logbook keyer, SSTV that follows a timing step instead of tearing the picture, and a transponder-database merge that keeps up when a bird gets its Oscar number.

Thanks also to Dave G4DPZ for the SSTV timing and adaptive smoothing work that landed in this release.

Dual radio

  • Satellite radios as Dual radio legs. The IC-910, IC-9100, IC-9700, IC-821H, FT-847, and TS-2000 can pair with another radio. OscarWatch turns satellite mode off and tunes one VFO only, so you can run an IC-9700 with a TS-990S (or similar) without fighting the radio's own sat mode. (#234, #235)
  • Icom LAN on a Dual radio leg. Saving Settings no longer fails with a COM-port hint when the downlink is an Icom (or Kenwood) network radio. The conflict check now sees the same LAN fields as Save.

CW (BETA Testing)

  • Live CW decoding. Decode soundcard audio locally with DeepCW: a tunable waterfall, Doppler correction, note following, and noise squelch. Automatic pass-based listening, transcript export, and logbook hooks for decoded callsigns and locators. Capture is shared with SSTV.
  • CW keyer in the logbook. Twelve named macros (F1 to F12) sit between the QSO entry and the history when the mode is CW. Kenwood uses KY text, Icom uses CI-V 0x17, and other radios key DTR or RTS on the CAT port or a separate COM port. Speed is set with the WPM box. (#154)

SSTV

  • Timing steps without a torn picture. A gap or repeat in the recording (or a pause in the sender's audio) used to pull every later sync off the grid. The decoder now starts a new stretch when a confirmed step lands, so the lower half of the picture stays locked. On a real ISS PD180 with timing steps, lock rose from about 92% to 98%.
  • Adaptive smoothing for weak pictures. Speckle is blended out where the neighbourhood is noisy, and left alone on a strong pass. On by default; ignored when Smooth across lines is on. Fine horizontal detail is no longer mistaken for noise.
  • Noise looks like noise. Pure noise no longer paints as bright random colour. Unsteady envelope fades towards dim grey, closer to what MMSSTV shows, while a usable picture keeps its colour.
  • Shared pictures keep the NORAD ID. Uploads include the catalogue number when it is known, so a renamed bird still lands in the right gallery on OscarWatch.org.

Radios and passes

  • FT-817 DATA jack for Digirig FT4. Catalogue DATA-USB and DATA-LSB select DIG (and PKT for DATA-FM) so Digirig and similar interfaces can TX. Sideband stays on the USER-U / USER-L menu to avoid EEPROM writes. (#241)
  • Icom serial port not found. A missing or busy CI-V COM port now surfaces the port-not-found guidance instead of a generic "CI-V not responding" message.
  • Stale TLE warning in the pass list. A pass row is marked when the satellite's element set is older than a period you set on the TLE tab (1 to 365 days, default 14). The satellite picker uses the same period. Thank you, Dave G4DPZ.
  • UHM while the bird is up. Terminal UHM posts and match polling wait until the focused satellite is above the reportable elevation, and show Below horizon when it is not.

Satellites and the transponder database

  • Oscar designations. UNNE-1B is now SO-131, HADES-L is SO-132, Erminaz-2U / 2V are AO-129 / AO-130, and Luca is LUCA-1, with former names kept as alternatives. Modes and aliases were refreshed for those birds; RADFXSAT (FOX-1B) was removed from the shipped database.
  • Official renames on Update transponder database. After a TLE update to the new Oscar name, merge used to match the old local entry and offer nothing, so SO-131 showed "No transponder data". The merge now offers the official preferred-name rename when the published entry lists your old name under alternative names, and it replaces a stale NORAD ID when the catalogue number changed. Run Satellites → Update transponder database… (or the startup check) and apply the rename.

Full Changelog: v1.1.7...v1.1.8