Repository navigation
Releases
Pina Studio 0.4.0
Pina Studio 0.4.0 is about sampling. Smart Slice cuts any recording as a producer would, in one click: it hears by the sound whether it's a beat, a voice in a beat or a voice alone, and names every slice for what it sounds like. Stems come apart with a separation model you add, lyrics are heard by Whisper, and the Studio Agent flips the chops into hooks and grooves you can hear before you keep them. Plus a drum rack, a rebuilt sampler, Synth-0's own effects and library, Bloom, MPE and MIDI FX in the piano roll, and much more below.
- macOS:
PinaStudio-0.4.0.dmg: open it and run Install Pina Studio. - Windows:
PinaStudio-0.4.0-windows-x64-setup.exeinstalls it for you (no administrator needed); the zip holds the same two programs to run without installing.
Stems and lyrics use models you choose and download from Settings › Stems & lyrics; Pina Studio ships none.
Changed
-
Slicing a sample (Slice to Sampler, To Sampler, or Slice in the Sounds browser) before its
audio has been read waits for it and slices it then, the status bar saying it's reading it
and for how long, rather than asking to try again or leaving it unsliced. -
What takes a while shows that it's at work: progress that can't say how far moves; waveforms
still being read breathe where they'll be. -
The Lyrics panel's hooks are rows like its lines (how often each is sung where a line has its
time), each line's waveform in one quiet tone (the accent while it's heard), and Hear is a play
button. -
The Drum Machine is now a drum rack and drum sampler. The rack sits on the left and its panel
on the right, laid out to fit the pane with nothing cut off; the pane opens at the height they
need:- Drum Rack: sixteen pads at a time, sized to the pane's height within limits, with an
overview of all 128 notes beside them (drag it; ↑ ↓ a bank, ⌥ or ⌘ a row). Empty pads show
their note and the General MIDI drum there. Each pad has mute, preview and solo, and the
previous and next similar sound and a lock on hover (Swap all leaves locked pads). Under the
pads, the picked pad's strip: its name, note and choke group, mute, solo, lock and swaps.
Its title has Swap all, the kit's hot-swap, and its options (auto select, the swap buttons
on the pads). Right-click a pad or chain to rename, duplicate, lock, show similar files,
extract the chain to a track of its own, or delete it. Drag a pad onto another to trade,
with ⌘ or ⌥ to layer it; several samples dropped on a pad map up a note each (with ⌘ or ⌥,
all layer on it). - Its panel, by tabs: Sampler, Effects (the picked pad's own), Chains, Macros and
Hot-swap. - Chain list: a row a pad, with on, solo and hot-swap; Receive, Play (moves the sound by
the difference) and Choke (16 groups) with a preview; volume and pan; a send to each of the
kit's return chains (up to six). - Macros: up to 16, shared with every pad; Map, then turn a pad's knob to set how far a
macro moves it; Rand; variations kept (New), launched, overwritten and deleted. - Drum Sampler on the picked pad, a waveform over two rows of cards: the waveform (drag
start and end; the similar sounds and hot-swap along its foot; right-click for Show Similar Files, Return to Reference, Save as
Similarity Reference, Reverse); Start, Length and Gain; Attack, Hold and Decay with Trigger
or Gate; Transpose and Detune. A playback effect (Stretch, Loop, Pitch Env, Punch, 8-Bit,
FM, Ring Mod, Sub Osc or Noise) on and off, its two settings on knobs and an X/Y pad. The
filter on and off as 12 dB or 24 dB low pass, 24 dB high pass, or a peak with its gain.
Volume, pan, velocity to volume, and velocity or slide moving the filter, attack, hold,
decay or either effect setting. Its layers as tabs, with how they play. - Effects: the picked pad's own, each opening its window, + to add one.
- Hot-swap: the picked pad's sounds (like it, its pack's, its kind),
or with D the kit's (drums picked to fit the song, or a folder's, loaded into it). - A new kit starts empty, its pads waiting for sounds (with no drums in the library at all,
the synthesized kit as before). The Drum Machine's bar no longer has a Kit button. - Too narrow for three across, the Drum Sampler's cards wrap under each other and its panel
scrolls, rather than squeezing on top of each other.
- Drum Rack: sixteen pads at a time, sized to the pane's height within limits, with an
-
The sampler has a hold stage, a 24 dB high pass and a peak filter, the sub at its own
frequency, punch's release, the vintage sampler's grit fading out, a loop of its own, its own
pan, and these all automate. -
A track has up to 24 modulators (it was 8), so a kit's macros leave its pads room.
-
The Sampler's editor is laid out by what each setting belongs to. Along the top, captioned,
the instrument's mode and character; under the sample, the picked zone's bar in its colour:
Trim (start and length as sliders, and reverse), One-shot or Gate, its loop and the loop's
crossfade, Trigger (as its note starts or as it's let go) and its choke group from a
dropdown. The sample's start and end marks are bigger, with a grip to take hold of and their
names. A zone's note (a range's low, high and root) is a dropdown of every note, an octave a
row, and its other settings sit three and three. Too short for all of it, the editor scrolls. -
The Drum Sampler's Stretch Factor is how many times longer the sound lasts, 1× to 16×.
-
An audio region opens in the new Audio editor (double-click it, or Open in Audio Editor from its
menu): its file big, the part the region plays lit in its track's colour, its hits marked
along the top and where it's playing. Drag its START and END handles to trim it (what it plays
stays where it is on the timeline) and its fades' dots to fade it; under it, Trim (start and
end as sliders, and Reverse, which plays it backwards from a reversed copy of its file and
back), Fades, Level (an audio region has its own gain now, ±30 dB, its waveform drawn as loud
as it plays here and on the tracks, white where it clips), Pitch (transpose and formants),
Stretch and Time. The wheel zooms where it points. -
An audio region made a Sampler track, from the Audio editor's bar or the region's menu:
Convert to Sampler Track puts what it plays across the keys (C3 as recorded, its transpose,
fades and timing kept); Slice to Sampler Track cuts it into a sound a note from C1, at its hits
or on the song's grid (every 1/16, 1/8 or 1/4 note, or bar).
Either way a MIDI region plays it back where it was (at the speed and in the key it played,
its loops going on as far as they did), the audio region is muted, and the Sampler opens on it. -
Any sample in the Sounds browser can be sliced: Slice, beside Add to song (Slice to Sampler on
the Sounds page), cuts it at its hits or on the song's grid onto a new Sampler track, a sound a
note from C1, with a MIDI region at the playhead playing them back in time (a loop fitted to
the song's tempo and key, looping on). No audio track is left behind; one undo takes it back. -
Opening a song shows a loading screen while it takes more than a moment: Pina's mark with its
steps playing, the song's name, a bar filling as each track's instrument and plugins load (and
what's loading now), and a cell for every track, in its colour, lighting up as it's ready. Its
audio files are read on a thread of their own while the plugins load, and the window keeps
drawing between tracks rather than freezing till the whole song is in. The screen fades out
over the song once it's open; a song that opens quickly never shows it. -
An audio region's end drags no further than its audio goes, as in Logic: dragging its bottom
right corner on stops where the file ends instead of leaving an empty region after it (loop it
from the top of its end for more). -
Plugins as MIDI FX: Scaler, MIDI-processing Audio Units, CLAP note effects and VST3 event
effects go in a track's MIDI FX chain, before, after or between the built-in ones; what each
hears is what's above it, and the notes it plays go on down the chain to the instrument (live
and in a bounce). The MIDI FX window lists the MIDI effects found, and Any Plugin… searches
every instrument too, for those (as Scaler is) that play notes out. A plugin slot opens its
own window from the chain, keeps its settings when the chain changes, and saves them with the
song. MIDI effect Audio Units no longer show among audio effects. The window's kind tiles grow to
fit what they say. -
Tracks move by dragging their header up or down: a line shows where it goes, a stack's tracks
stay in their stack and others stay out of it; one undo puts it back. -
The snap has every grid Logic has: Bar, Beat, 1/2 to 1/64 notes, 1/4 to 1/32 triplets, dotted
1/8 and 1/16, and Off (ticks); Smart reaches 1/8 and 1/32 as you zoom in. Snap Relative moves
regions by the grid while keeping how far off it they were. The lanes draw the snap's division
(finer than the beats) where there's room. -
Automation: a click on the line puts a point on it there (it used to grab the line, so points
needed the pencil); a drag still moves the line. ⌃⇧-drag bends a line, as Logic's does, and each
line's bend handle shows faintly without hovering. Every lane has a Curves button: S-curves to
smooth every line, slow or fast starts, straight lines, steps, smoothing out bumps and thinning,
on the points picked or, with none, the whole lane (its right-click menu has S-curves and
straightening too). -
Convert to Pattern Region keeps the region as it plays: the step its notes sit on (1/16, 1/16
triplets, 1/32 or 1/32 triplets), all of its length (up to sixteen bars), or the fewest bars
that loop through it unchanged; before, it took four bars at most and looped them, losing the
rest. Pattern regions draw as steps in the arrangement: a row a sound, a cell a step, lit by
velocity, held steps ...
Pina Studio 0.3.0
Pina Studio now runs on Windows as well as macOS.
- Windows:
PinaStudio-0.3.0-windows-x64-setup.exeinstalls it for you (no administrator needed); the zip holds the same two programs to run without installing. - macOS:
PinaStudio-0.3.0.dmg: open it and run Install Pina Studio.
Added
- Pina Studio for Windows: an installer (per user, no administrator) with the app, the
pina
command and a Start menu entry. VST3, CLAP and VST2 plugins, with their editors; settings in
AppData; deleted songs to the Recycle Bin. Audio Units stay macOS's; bounces are WAV and MP3
there; mastering needs macOS's limiter for now.
Pina Studio 0.2.0
The Mac installer is below (a disk image: open it and run Install Pina Studio). The Windows installer follows in the next release, once its first build is through.
Added
- Modulators reach every plugin parameter. Learn on a modulator's card maps it to the next
control you turn in a plugin's own window, and its target menu lists every parameter of the
instrument and of each insert, searchable. - A modulator's settings can be automated: right-click a knob on its card (a macro's value, an
LFO's phase, an envelope's times…) and pick Automate. Agents do the same with
set_automationand"param": "modulator". - An automation lane takes modulators: right-click its header to map one of the track's
modulators to what it shows (or make a new one that does), or drop a modulator's ↗ on it.
Coloured dots show which modulators move it. - Pick several tracks: ⌘-click a header (or a mixer strip) to add or remove it, ⇧-click for every
track in between. ⇧⌘D, or Create Track Stack in a picked track's menu, stacks them all. - Stacks have a row of their own above their tracks: fold them away, the stack's name and track
count, mute, solo and a level to drag. Its lane shows its tracks' regions, and its tracks are
set in under it. Flatten Stack (in its menu, or a track's) undoes one. Agents:
flatten_stack. - Stacks share modulation: + Shared in the Modulation pane adds an LFO, steps, follower,
random or macro to the stack, and every track in it routes it to its own settings. Agents:
share_modulator,unshare_modulator. - Mixing by measurement: each part's channel set from its own measured sound, room made between
parts, real reverb and delay, and a tonal master. - Agents can hear timbre (
listen) and audition presets for a part (sounds), and samples are
chosen by what they're for: drums judged as drums, pitched drums tuned to the key.
Changed
- Making a stack moves its tracks together under the first of them. The
add_stackcommand
answers with where every track went. - A follower's source, in commands, is the followed track's place, as every other track is named.
- The code is organised by feature: the app in
ui,workspace,arrange,editors,mix,
sounds,pages,agentandcli, the engine insong,audio,dsp,musicandplugin;
large files are folders of a file per job, and tests sit in files of their own. - Comments, docs and on-screen text say what Pina Studio does rather than which other product
something resembles.
Fixed
- The Modulation pane no longer slows the whole app with a large plugin loaded: it asked the
plugin for every parameter's name on every frame. - A follower follows the same track after the song is saved and opened again.