Repository navigation
Releases
manycommander 0.7.1
manycommander sftp://host/path opens the server in its panel.
Fixed
- An
sftp://address works as a start directory:manycommander sftp://host/pathopens
the server in the left panel, ascd sftp://host/pathdoes, and a second address opens in
the right panel. Before, the address was taken for a local path and the panel showed the
working directory.
manycommander 0.7.0
manycommander is now licensed under MIT or Apache-2.0, members of large zip and 7z archives
open at once after the first, and copying or moving trees full of hard links no longer runs
out of open files.
Added
- Release tarballs carry
THIRD-PARTY-LICENSES, the licence texts of the crates
manycommander is built from.
Changed
- manycommander is now licensed under MIT or Apache-2.0, at your option; it was Apache-2.0
only. Contributions are taken under the same terms. - Viewing, previewing or extracting a member of a large zip or 7z archive no longer reads the
archive's whole table of contents again each time: after the first member, the others open
at once (in a 500,000-entry zip, 0.1 ms instead of about 400 ms). manycommander keeps that
table of contents in memory while a panel shows the archive.
Fixed
- Copying or moving a tree whose hard links are spread over many directories, or extracting
an archive with many hard-link members, no longer fails with "Too many open files"; the
hard links are still kept. Escstops the size calculation of a server directory (Space) also when a secondSpace
replaced an earlier calculation, or when a size from the other panel came in meanwhile.
Before,Escleft such a calculation running on the server.
manycommander 0.6.3
Security and robustness fixes from a review of the whole program: a crafted archive, server
or file name can no longer crash manycommander, use up its memory or disguise itself, and
Ctrl+Z in a program that manycommander started no longer freezes the terminal.
Changed
- The upload dialog says when the server has no hard links, so files are written in place
and are visible while they are written.
Fixed
- Quitting, and the check of an edited copy of a server file, no longer wait for a slow
SFTP download in another view to finish. - A case-only rename whose second step fails puts the file back under its original name
instead of leaving it under an intermediate name. - A copy or move into a destination more than 8192 directories deep is refused, instead of
checking only part of the way up for the source. - A symlinked
hotlist.tomlordirs.tsv, as dotfile managers make them, is saved through
its link instead of being replaced by a plain file. - Editing a copy of a server file offers "Save as" also when the server file changed while
it was downloading. - A filesystem that reports enormous block counts no longer makes the free-space figure wrap.
Escon a server listing no longer waits behind an upload that the same connection is
still sending.- A server that keeps reporting new directories, or sends enormous names, can no longer use
up memory: scans and listings stop at their limits and say so, and a permanent delete is
refused when a scan stopped early. ~andsftp://host/~/...in the upload dialog mean the login directory.- A failed connection no longer leaves an
sshprocess behind. - A tab you switch back to follows changes on disk again.
- A change made while a slow directory refreshes is no longer missed, and a directory that is
deleted and created again is watched again. - Directory sizes computed with
Spaceand the kinds of symbolic links survive a refresh.
Spacereports directories it could not read, andEscstops a size computation. - A dialog field longer than the dialog scrolls with the cursor.
- Going back in the history keeps its place when the directory cannot be loaded yet, and a
failed navigation no longer leaves a duplicate history entry. - Find treats a
[without a closing]as a letter, as the quick filter does. Backspacein quick search removes a whole character.- Scrolling the help and the job report stops at the end.
- The command-line cursor sits right after a directory name with wide characters, and the
tab bar always shows the active tab. - A pasted line break from a terminal that sends carriage returns becomes a space, as other
line breaks do. Ctrl+Zin a program that manycommander started, such as the pager, the editor or a
command, no longer freezes the terminal, and an editor that suspends itself comes back.- Closing the terminal window during "press Enter to return" no longer leaves manycommander
running at full CPU. - With no editor configured,
F4runsviwhennvimis not installed; an editor you name
is never replaced by another. - A
--theme-filethat is a symbolic link reloads when the file it points to changes. - A picture in the quick view inside tmux keeps its proportions in a very wide pane, and the
quick view's text lines up tabs after wide characters. - When the terminal cannot be set up, manycommander gives it back as it found it.
- A tar hard link to a member that a later member of the same name replaced is no longer
extracted with the later content. - An archive whose later members replace many entries of the shown directory no longer stalls
its scan. - A file opened with
Alt+Oas one format still says "not a zip archive" when it is entered
under a.zipname it does not match. - Sizes that an archive or a server declares no longer wrap the free-space question or the
marked total when they are enormous.
Security
- A crafted archive can no longer crash manycommander with a member nested hundreds of
thousands of directories deep, or use up memory with repeated symbolic links. xz and LZMA
members of a zip decode within the same memory limit as a compressed tar. - Names of files, archive members and server entries, and Markdown in the quick view, show
bidirectional controls and line separators escaped (\u{202e}), so a name cannot disguise
its extension or break its row. state.toml, which holds the command history, is written readable by you only.- Control characters in what
sshprints during a connect show as?instead of reaching
the terminal.
manycommander 0.6.2
Ctrl+C in a program that manycommander started no longer quits manycommander too.
Fixed
Ctrl+C,Ctrl+\orCtrl+Zin a program that manycommander started, such as the pager,
the editor or a command from the command line, sometimes quit or stopped manycommander as
well. It happened when the program ended at once on the key, before manycommander had
looked at the signal.
manycommander 0.6.1
sftp://host opens the login directory on servers with OpenSSH before 9.9, and the binary is
15 percent smaller.
Changed
- The quick view scales pictures to the pane with its own box filter instead of the
fast_image_resizecrate. The binary is 1.3 MiB (15 percent) smaller, and a scaled
picture is the exact average of the pixels it covers, where the crate was off by one in
about a fifth of the bytes. A 12-megapixel photo takes about 1.5 ms longer to show.
Fixed
sftp://hostand/~/...open the login directory on a server with OpenSSH before 9.9,
such as Ubuntu 24.04's or Debian 12's. Such a server refuses thehome-directoryrequest
for the login user, and manycommander showed "Failure" instead of asking for
REALPATH(".").
manycommander 0.6.0
Enter and F3 open files through gio open, so a terminal program opens in a terminal
window, and a directory on the command line starts on the left panel.
Changed
- A directory on the command line makes the left panel active. The last session's active
panel returns only when the command line names no directory.
Fixed
EnterandF3open a file throughgio open, and throughxdg-openonly wheregiois
missing. On Hyprland,xdg-openstarted a terminal program, such as the terminal editor
that handles text files, without a terminal: nothing showed, and the program never ended.
Such a program now opens in a terminal window.
manycommander 0.5.0
F3 opens pictures, documents, media and web pages in their application, the quick view
renders Markdown, and copies and moves of many small files are faster.
Added
F3on a picture, a document, audio, video or a web page opens it in its application, as
Enterdoes: the desktop's default application throughxdg-open, a web page in the
default browser. The extension decides, for a regular file or a symlink to one. Every other
file still goes to the pager. Inside an archive or on a server, the copy opens the same way
and stays until manycommander exits; a copy the application changed is kept, and
manycommander says where when it exits.- The quick view renders Markdown files: headings, emphasis, code, lists, quotes, rules,
links, pictures and tables, wrapped at the pane's width.
Changed
- Copying many small files is faster: a copied file is written to an unnamed temporary file
and gets its name when complete, so a crash leaves no.mc-partial-*file behind on ext4,
btrfs, xfs or tmpfs. 50k files of 4 KiB copy at 1.3xcp -rinstead of 1.7x. - A move to another filesystem flushes every 1024 files instead of every 256: 50k small files
move at 1.1xmvinstead of 2.4x. After a crash, up to 1024 files can be in both places,
never in neither.
Fixed
- A directory that holds a stalled network or FUSE mount lists again; it stayed "(loading)".
Listing a directory no longer triggers the automounts in it. - The delete prompt names the unit of a small size ("2 files, 1 directory, 2 bytes"), and a
move out of a server names the entry, not its server path without the leading/.
manycommander 0.4.1
Two fixes found by the hands-on verification of 0.4.0.
Fixed
- The quick view no longer crashes Ghostty. Ghostty releases built with Zig 0.15 crash, with
all their windows and tabs, when they unpack a kitty image compressed the way
manycommander sent it. A picture that compresses now goes as a PNG; a photo that does not
compress goes uncompressed, as before. Alt+*,Alt+=and the otherAltchords on a symbol typed withShiftwork on every
keyboard layout in a terminal with the kitty keyboard protocol (Ghostty, foot, Kitty). On a
Spanish layoutAlt+*did nothing.
manycommander 0.4.0
Type to filter: the keyboard goes to the panel first.
Added
- Typing a letter filters the active panel. The quick filter opens with it, ignores case
(also beyond ASCII:æblefindsÆbler.txt) and forgives a typo: when no name contains
the text, the names closest to it show instead, markedfuzzy. From four letters one
wrong, missing or swapped letter counts (reamdefindsREADME.md), from six also an
extra letter, from nine two typos. The cursor goes to a name that starts with the text. Ctrl+Emoves to the command line. The terminal cursor shows there only while it has
the focus.- The help overlay (
F1) names the version in its top border.
Changed
- Typing no longer goes to the command line: press
Ctrl+Efirst.Alt+Enter,Alt+P,
Ctrl+Pand a paste still put text on the line and move there.EnterandEscon the
line go back to the panel. Enteron the filter line opens the entry under the cursor and keeps the filter;
Ctrl+Fcloses the line without acting.Backspaceon an empty filter line closes it,
and on an empty command line goes back to the panel, instead of going to the parent
directory.- The function-key bar names each key with its
F:F1Help,F3View,F10Quit. - A
[in the filter is a glob only when a later]closes it.
manycommander 0.3.2
The program is unchanged; this release is about installing it.
Added
- Install with mise, which Omarchy ships:
mise use -g github:manyfold-dk/manycommander.
omarchy updatekeeps it current. The install page and the start page lead with it. - Release tarballs carry a GitHub build provenance attestation. mise verifies it on install;
gh attestation verify <tarball> --repo manyfold-dk/manycommanderverifies it by hand.
Changed
- manycommander.app: the docs navigation is grouped, and each page lists its sections; accent
text reaches 4.5:1 contrast in every theme; the copy guarantee names the filesystems that
keep it (ext4, btrfs, xfs).