Skip to content

Releases

v1.0.1

Choose a tag to compare

@github-actions github-actions released this 12 Nov 16:55
bc1ab7d

A fix release for upgrades. If you are on 1.0.0 already, sudo apt update && sudo apt full-upgrade (or sudo dnf upgrade on EL9) is all you need.

Fixes

  • Armbian and DietPi installs now move to the new repository. 1.0.0 only recommended the alejandro-md-keyring package, and Armbian and DietPi turn recommended packages off system-wide. Those machines upgraded to 1.0.0 but kept pointing at the old amd989.github.io/mariner repository, which gets no further updates. mariner3d now depends on the keyring (and on alejandro-md-release for the rpm), so every install moves over. 1.0.1 is published to the old repository too, so machines stuck there pick it up on their next upgrade.
  • Upgrades no longer disconnect the printer's USB drive. Since 0.5.2, every deb upgrade stopped mariner-usb-gadget and never started it again, so the printer lost its files until the Pi rebooted, and an upgrade during a print would end the print. The rpm restarted it, which dropped the drive briefly. Upgrades now leave the gadget running.
  • A config file in your home directory is read again. ~/.mariner/config.toml was ignored because the ~ was never expanded (#532).

Also in this release

  • The license file once again carries Luiz Ribeiro's original MIT notice, and it now ships with the deb, rpm and Docker image.
  • The Docker docs point at ghcr.io/mariner3d/mariner.

Installing a downloaded package by hand

Packages now depend on the repository package, so apt install ./mariner3d_*.deb on a machine without the repository configured needs the keyring too. The simplest path is the setup script:

curl -fsSL https://packages.alejandro.md/setup.sh | sudo sh
sudo apt install mariner3d

Full changelog: v1.0.0...v1.0.1

v1.0.0

Choose a tag to compare

@github-actions github-actions released this 11 Nov 14:25
ea29ce4

Mariner has a new home at mariner3d/mariner. Luiz Ribeiro, who created Mariner, handed the project over to keep it alive. Thank you, Luiz.

This is the first release from this repository since 0.2.0 in April 2021, and it brings together everything that happened since:

  • the work Luiz did after 0.2.0 and never released,
  • encrypted .ctb support from Desterly and BlueFinBima,
  • and the releases of the amd989/mariner fork, which shipped as 0.3.0 through 0.7.6.

That is why the version jumps from 0.2 to 1.0. If you used the fork, little changes for you beyond where Mariner is installed from: see the last section.

What's new since 0.2.0

A new web interface

  • Redesigned UI, with dark mode.
  • Folders for organizing print files.
  • Upload progress indicator.
  • Power menu to reboot or shut down the Pi from the navigation bar.

Files and slicers

  • Encrypted .ctb files, as written by newer versions of ChiTuBox.
  • .photon files.
  • Send prints straight from your slicer over the network: UVTools network transfer, and SDCP v3 with printer discovery (Lychee Slicer included).
  • macOS resource-fork files (._*) are ignored instead of listed.

Printer communication

  • Much more reliable serial handling: commands are retried, buffers flushed, and a dropped connection shows as disconnected instead of an error.
  • Print progress is estimated from the Z layer, which is steadier than byte counts.
  • No longer specific to Elegoo Mars printers.

Platforms and install

  • One-line setup script, then apt install or dnf install.
  • Debian and Raspberry Pi OS bookworm and trixie, on amd64, arm64 and armhf. Armbian is supported.
  • RHEL, Rocky Linux and AlmaLinux 9 (rpm, on EL9's python3.12).
  • Docker images on Docker Hub (amd989/mariner3d) and ghcr.io/mariner3d/mariner.
  • Raspbian buster is no longer supported.

Install

Packages are served from packages.alejandro.md:

curl -fsSL https://packages.alejandro.md/setup.sh | sudo sh
sudo apt install mariner3d      # Debian / Raspberry Pi OS (bookworm, trixie)
sudo dnf install mariner3d      # RHEL / Rocky / AlmaLinux 9

Documentation: mariner.readthedocs.io

Upgrading

From Luiz's original PPA (ppa.l9o.dev, Mariner 0.2.x): those installs run on Raspbian buster, which this release does not support. Install a current Raspberry Pi OS, then follow the install steps above. The old PPA stays online but receives no updates.

From amd989.github.io/mariner (Mariner 0.3 to 0.7.6): run

sudo apt update && sudo apt full-upgrade

This installs 1.0.0 together with a small alejandro-md-keyring package, which switches your machine over to packages.alejandro.md automatically. Use full-upgrade (or apt upgrade): plain apt-get upgrade keeps mariner3d back at 0.7.6 because the upgrade brings in a new package.

Changes since 0.7.6

  • Packages now come from packages.alejandro.md, and recommend the repository package (alejandro-md-keyring on Debian, alejandro-md-release on EL9), which owns the signing key and source definition so future changes arrive as normal upgrades. The signing key is unchanged.
  • RPM packages now target EL9 (RHEL, Rocky Linux, AlmaLinux 9). Previous rpms were built for Fedora 41, which is end of life, and could not be installed on EL9 at all. Fedora is no longer a tested target.
  • Docker images are now also published to ghcr.io/mariner3d/mariner.
  • Refreshed favicon, shared with the mariner3d organization avatar.
  • Documentation moved back to mariner.readthedocs.io, and once again credits Luiz for the work it is built on.

Full changelog since 0.2.0: v0.2.0-1...v1.0.0

v0.7.6

Choose a tag to compare

@amd989 amd989 released this 10 Nov 19:22
63dec72

Packages for Debian bookworm and trixie (amd64, arm64, armhf) and Fedora 41 (x86_64, aarch64).

About this release

Tag v0.7.6 was built before the project moved into the mariner3d
organization. Git tags transferred with the repository but GitHub release
objects did not, so the artifacts are re-attached here, byte for byte as
originally published, to make this repository the single source for mariner
packages.

Full changelog: see CHANGELOG.md.

v0.2.0-1

Choose a tag to compare

@luizribeiro luizribeiro released this 17 Apr 19:35
a546ae1
  • Added support for more printers (see README.md)
  • .cbddlp and .fdg files are now supported in addition to .ctb, which enables printers like Voxelab Proxima to be used
  • Fixed bugs related to write buffers not being flushed after file upload (see #311)
  • Most recently uploaded files are now listed first
  • Other small bug fixes and upgrades of dependencies

Upgrading

We now have a PPA repo that hosts mariner's .deb packages. In order to set it up, run the following commands:

$ curl -sL gpg.l9o.dev | sudo apt-key add -
$ echo "deb https://ppa.l9o.dev/raspbian ./" | sudo tee /etc/apt/sources.list.d/l9o.list
$ sudo apt update

Then you can install/upgrade mariner simply with:

$ sudo apt install mariner3d

By installing mariner from the PPA repo, you will always have the latest version after an apt upgrade, just like every other package.

v0.1.1-1

Choose a tag to compare

@luizribeiro luizribeiro released this 18 Oct 01:12
aa2fc87

Mostly small fixes for unsupported (i.e. non-ctb) files:

  • Fixed bug when a non-ctb file was under /mnt/usb_share
  • Allow to delete non-ctb files from /mnt/usb_share

v0.1.0-1

Choose a tag to compare

@luizribeiro luizribeiro released this 11 Oct 15:40
e1c22e0

This is the initial release. There's still a few bugs and lots of missing features but overall it is functional.

Main features of the Web UI are:

  • Checking print status (roughly same functionality as touchscreen display on printer itself)
  • Controlling printer (starting prints, pausing/resuming/stopping prints)
  • Listing files on the Raspberry Pi Zero W
  • Uploading files
  • Loading file details from CTB files (preview and some of the slicing settings)

For now, only Elegoo Mars Pro (not 2!) has been tested. CTB files are the only ones that are supported.