Repository navigation
Releases
Keevoro v0.29.0
Added
- A backup can go to more than one place. On the backup screen, "Add another destination" adds a second (or third) place beside the first: any mix of folders, drives, Cloudflare R2, Amazon S3 and other storage. "Back up now" sends to each in turn. A new destination starts empty and catches up on the next backup; nothing already sent elsewhere is sent again.
- Each destination shows its own count. With more than one, the screen lists them, each with how many files are there and how many are waiting, and a Remove button. Removing one only takes it off the backup's list. Nothing stored there is deleted.
- If one destination cannot be reached, the others still get their backup. An unplugged drive or a dropped connection is reported by name and passed over; it catches up next time.
Changed
- A photo counts as safe only when it is at every destination. With one destination this is as before. With several, a photo that has reached one but not another is still shown as waiting, so a second copy that is half made is never mistaken for a whole one.
- After changing where a backup goes, the counts are honest. Before, a backup that was pointed somewhere new still showed everything as safe, because it had once been sent somewhere. It now counts what is at the destinations it has today.
- "Check they all arrived" checks every destination, and each earlier backup in the history is listed with the destination it went to.
Removed
- The downloads badge on the project page. It counted every file fetched from every release, including the fetches Keevoro's own release process makes, so the figure said nothing true about how many people use it.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.28.0
Added
- A backup's figures in plain sight. The Choose screen and the backup screen now open with large figures: how many photos and videos you are keeping and their size, how many duplicates were left out with the room that saves and what share of everything found they were, and how many pictures were set aside. Clicking the duplicates or set-aside figure opens its list.
- Where each earlier backup went. "How earlier backups went" has a new Where column, so after changing a backup's destination you can still see where the earlier ones were sent.
Changed
- What a backup said when it finished stays on screen. The summary at the end of a backup (how many files, the previews, how long it took and the speed) used to vanish as soon as you looked at another screen. It is now kept with the backup and shown until the next backup replaces it, even after closing Keevoro. Changing the destination clears it, since it was about the old one.
- The duplicates list says how much room was saved.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.27.2
Changed
- Click a picture to open it; double-click to keep or leave it out. Inside a collection, a single click now opens a photo or video large, as you would expect. To keep it or leave it out, double-click it or click the tick in its corner. Before, a click changed the tick and you had to hold down to look. The line under the heading says how it works now. In the large view the Keeping switch, the arrows and Escape work as before.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.27.1
Changed
- A file already at the destination is fingerprinted before it counts. When a backup to a folder or drive found a file of the same name and size already there, Keevoro took it to be the same file. It now reads that file and compares its fingerprint. If it is a different file, yours is reported as not backed up, and what is there is left alone.
- Files that could not be read are said on screen. After looking through a source, Keevoro now says how many files it could not read and names the first few. They used to be listed only in the log.
- The promises on the About page say exactly what Keevoro does. Each was checked against the code. Four were worded more strongly than was true and have been made exact: which copies are read back and compared, that it is originals that are never replaced (previews and the list of contents are rewritten), where unreadable files are reported, and what Keevoro keeps on this computer.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.27.0
Added
- Back up the originals alone. The backup screen has a new switch, "Also make previews for a gallery". It is on to begin with. Switch it off and only your original files are backed up, exactly as they are, with no thumbnails or other versions made, which is quicker. Switch it back on later and the previews are added then. Each backup remembers its own choice.
- An About page, with what Keevoro promises. "About Keevoro" in the side bar opens a page headed "Your photos are safe with Keevoro". It sets out the rules Keevoro never breaks: your sources are only ever read, a copy only counts when it is proved exact, nothing in a backup is ever replaced or removed, duplicates are exact, nothing is hidden, you never need Keevoro to get your photos back, and your photos go only where you send them. The page also has the origin of the name and the licence, with buttons to read the licence, the note on the name and logo, and the source.
- A progress bar for every step of a backup. The bar used to show only while original files were going, and vanished while previews were made and sent. There is now always a bar, counting files when it cannot count bytes.
- The file just backed up is named. Under the progress, "Just done:" shows the file Keevoro has just dealt with, so you can see what is going by.
Changed
- Every copy written to a folder or drive is read back and proved exact. When Keevoro backs a file up to a folder, it now fingerprints what it reads from your source, writes it, makes sure it is on the disk, reads it back and fingerprints it again. If either does not match the fingerprint taken when the file was found, the copy is thrown away, the file is reported, and it is tried again next time. This makes backups to a folder somewhat slower, because each file is read back once. Backups to cloud storage are unchanged.
- Several files at once to a network drive. A backup to a folder on a file share, such as a mapped drive letter that is really storage elsewhere, now sends four files at a time, which is much quicker for many small files. A disk in the computer still gets one at a time. This is worked out on Windows; on a Mac a network folder is still treated as a disk.
- "Your sources are only ever read" has moved from the bottom of the side bar to the About page, where it is explained properly.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.26.1
Changed
- Smoother graphs. The graphs on "What Keevoro is doing" jumped up and down like a saw, even when Keevoro was working steadily, because the computer reports what a program has read and written in lumps. Each point is now the average of the last five seconds, so a steady 8 MB/s looks steady. The line under each graph says so.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.26.0
Added
- One button to pick up new photos. Under "Your sources" there is now "Look again for new photos". It looks through every source of the backup again, one after another, and the next backup sends only what is new.
Changed
- Backing up to cloud storage is several times quicker for many small files. Keevoro sent one file at a time and waited for the far end to answer before starting the next, which is slow when there are thousands of small previews. It now sends six at a time to Cloudflare R2, Amazon S3 and the like. Backups to a folder or a drive still go one at a time, where sending several only makes the disk work harder. Stop and Pause let the files already on their way finish.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.25.0
Added
- Find the folders with photos, in seconds. Not sure where on a drive your photos are? Choose the whole drive and pick "Find the folders with photos". Keevoro reads only the list of what is in each folder, never opening a file, so it gets through hundreds of thousands of files in a few seconds. It then shows the folders that seem to hold photos and videos, with how many and how big, each with a tick. Tick the ones you want and Keevoro looks through those properly, one after another.
- Probable icons are spotted. A folder of very small pictures with no videos is marked "Small pictures, probably not photos" and left unticked, so a program's own pictures do not sneak in.
- What Keevoro is doing, in plain words, at a glance. The side bar now says what Keevoro is busy with on every screen, under "What Keevoro is doing": for example "Making previews" or "Backing up your files and making thumbnails". Nothing is shown when it is idle.
- More kinds of work are named. "What Keevoro is doing" now also names making previews, making video previews, making thumbnails for the screen you are on and finding where your photos are, each with a sentence on why and what it costs your computer.
- Keep all or keep none inside a collection. Two buttons at the top of a collection keep or leave out everything in it at once.
- See where a collection came from. The folder, or folders, its files are in on your source are named at the top of a collection. Click one to open it.
keevoro surveyon the command line. The same quick survey, for those who prefer a terminal.
Changed
- Back takes you back to where you were. Coming back from a collection, the duplicates list, Settings or "What Keevoro is doing" returns to the same place on the screen, not the top.
- The top line of "What Keevoro is doing" says what, not just that it is working.
Fixed
- Opening a collection could show a different one. When photos from two separate occasions in the same month were both titled, say, "October 2004", opening either showed the first, and "Don't keep" on one could act on the other. Each now opens and keeps its own. Where two share a month they are named to the day, such as "2 to 3 October 2004" and "20 October 2004".
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.24.0
Added
- Hold down on a picture to see it larger. Inside a collection, or in the set-aside list, press and hold on any photo or video (or right-click it) and it opens screen-sized, without changing whether it is kept. From there you can leave it out or put it back, move to the next and previous with the arrow keys or the buttons, and close with Escape. A quick click still ticks and unticks as before. A video shows a still from it. The line under the heading now says so: "Hold down on one to see it larger."
- About Keevoro. Settings now says where the name comes from: the sound of English "keep" with "voro", an old Swedish word meaning "were". Keep things as they were.
Changed
- Mac and Linux versions come at milestones for now. While Keevoro is changing quickly, each release is built for Windows only, and Mac and Linux versions are made at bigger milestones. A Mac that has Keevoro is not offered an update it cannot install.
- Pictures on their way show a shimmer. A thumbnail that has not arrived yet used to be a blank tile, which looked as if nothing was happening. It now shimmers gently until the picture appears.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.
Keevoro v0.23.0
Added
- Every backup explains itself. Keevoro now writes a plain note, "What is in this backup.txt", into the place it backs up to. It says what each folder is for:
originals(your photos and videos, untouched),renditions(smaller versions made for looking at, with what thumb, display, poster and video each mean) andindex(the list a gallery reads). It also says how to get your photos back without Keevoro. - The same explanation in the app. The backup screen has a new "What is in the backup" line to open.
- Look at the duplicates before you back up. On the Choose screen, "N duplicates will be kept only once" now opens a list of every file found more than once. For each it shows the copy being kept and the folder it is in, and each copy left out and where that is. Click a folder to open it and see for yourself.
- How Keevoro decides, in plain words. The same screen explains that two files count as duplicates only when every byte matches, never on name, size or date, and marks any that are still being checked.
Changed
- The folder named while searching can be read. "Now in ..." used to change many times a second, too fast to read. It now changes every second and a half at most. The count of files still moves as it happens.
Fixed
- The main button lines up with the buttons beside it. "Back up now" sat a few pixels lower than its neighbours.
Every version's notes are in CHANGELOG.md. Already have Keevoro? Run keevoro update. New here? The one-line install is in the README.