Skip to content

Lamina 0.4.0

Choose a tag to compare

@github-actions github-actions released this 10 Nov 12:50
· 42 commits to master since this release

Changes in 0.4.0

Checks that find more, and an export that refuses a board that is not complete:

  • New check hole_to_copper: a hole wall near copper of another net, and a
    non-plated hole near copper. Before, a track through a mounting hole gave no
    violation. Pours and the autorouter keep the same distance.
  • Texts and drawings on copper layers are checked as copper. Before, they were
    in the Gerber files, but no check, pour or router saw them.
  • export refuses a board with open connections or parts with no placement,
    if force is not true. It always refuses blind and buried vias, because the
    drill files have only through holes.
  • New tool checks: each check with what it reports, why, its severity and the
    rule fields that set its limits. check has release: true to see the board
    as export sees it, and status has release_errors.
  • lamina check has --release, --fail-on and --rules, and exit code 2 on
    violations, for use in CI.
  • The model checks (for example pin_role) accept severities and exclusions.
    Checks of data that is not valid stay errors. New check zone_outline: a
    zone or board outline that is not valid gives a violation and does not stop
    the program.
  • A violation has actual and required values where a check compares a
    number with a limit (first in hole_to_copper).
  • KiCad import keeps the keep-out zones of a footprint (antenna areas) and the
    paste and mask openings that a footprint has as pads with no copper. The
    KiCad export writes footprint keep-outs.
  • use_fab_preset keeps the custom rules, exclusions and severities.
  • strict counts violations that have the same key, so a second free track
    end is refused.

Fixed in the examples: examples/tit-flight-computer had no paste on the
ground pad of the ESP32 module. Its antenna keep-out is now in the footprint.

Old boards: hole_to_copper is 0.2 mm for a board that does not set it. A pour
with a smaller clearance moves away from non-plated holes. A board with open
connections now needs force: true to export.

Not in this release: the other checks of docs/specs/checks-plan.md.