Repository navigation
Releases
Synkopa v0.9.25
Added
- Trap hats, snares and claps in the Standard library. Nine closed hats and three open hats
(Trap Hat Crisp, Tight, Metal…, Trap Open Hat Smooth…), fourteen snares (Trap Snare Punch, Hard,
Rage, Low, Clap…) and twelve claps (Trap Clap Thick, Warm, Gritty, Click…), chosen to sit with
the trap kicks and 808s. The library also takes 2 MB less space, with the same sound. - A clip light for the Master. A meter next to Main volume in the toolbar, and a cap above the
Master strip's meter in the Mixer, turn solid red when the output goes over 0 dBFS and show the
highest over (CLIP +5.0) until you click them. The tooltip says where it first clipped. - Fixed velocity for the MIDI keyboard. Settings → MIDI → Velocity: "Fixed" plays and
records every key at one velocity (100 by default, any 1–127) however hard it is pressed —
for keyboards without velocity or when you do not want it. "From keyboard" is the default.
Changed
- What you hear clips where the export does. A mix over 0 dBFS used to sound clean in the app
(Windows hid the overs) and distort in the exported MP3. Playback now clips at full scale too,
so you hear the problem before you export. - The splitter between two docked bottom panels trades their sizes. With the Playlist already
as small as it goes, dragging the splitter between the docked Channel rack and Piano roll now
shrinks the panels in between, nearest first, as in FL. A short Piano roll hides its velocity
lane so the notes keep the room.
Synkopa (formerly WAVE): a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/synkopa/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the Synkopa Keys piano.
- Windows: there is no
.msiany more. If you installed it from an.msi, uninstall it and installSynkopa_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
synkopacommand line works after the first start (open a new terminal):synkopa status,synkopa context(the oldwavename still works), see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
Synkopa v0.9.24
Added
- Trap kicks and an 808 section in the Standard library. Fourteen new trap kicks (Brick, Clean,
Clip, Dark, Hard, Heavy, Knock, Phonk, Punch, Rack, Stomp, Tight, Top…) and fifteen new 808s
(Zay Warm, Opium Growl, Drill Glide, Sub Pure, Plugg Short…) in a Browser section of their own
between Percussion and Tonal. Every 808 is pitched at its measured root key, so they swap and layer
on the same notes. - Double-click an empty mixer box to give a channel its own insert (as in FL). On a channel
with no insert ("—") it routes the channel to the first unused mixer insert, else a new one,
named and coloured after the channel, in one undo step. An insert you muted, renamed, set up or
automate is never taken. The channel and sample windows' MIXER list has the same as
+ Free insert. - The Playlist's vertical scrollbar zooms the lanes, as in FL: drag the thumb to scroll, drag
either end to make every lane taller or shorter, Ctrl+wheel over it to zoom. - Play says why there is no sound. When the audio output failed to open (a headset driver
error, an unplugged interface), pressing Play or playing a pattern shows a notice with the
reason, Try again (reopens the device) and Audio settings, instead of silently not
starting. - Auto vocal from the command line.
synkopa auto-vocal --clip Nmeasures a vocal take and puts
the tuned chain on its mixer insert in one call — the same chain the app's Auto vocal button
builds (pitch correction, vocal rider rendered into the audio, compressors, de-esser, reverb,
limiter), with--style hardfor rap tuning,--beat-clipto take key and level from the
beat, and--planto only print the proposal. It works without the app open
(synkopa -p song.synkopa …), so scripts and agents can tune vocals too.synkopa f0-model --install
downloads the RMVPE pitch model (after printing its licence note) and switches the pitch
detector to it. - Add a playlist sound to the Channel Rack from its clip. Dragging a sample into the Playlist
plays it there directly (as before, without a rack entry); the audio clip's menu now offers
"Add as sampler channel" to put the same sound on the rack and the keyboard in one click. The
item is disabled when the rack already has a channel playing that sample.
Changed
- Lighter dock guides. Moving a floating Channel Rack, Piano roll or Mixer no longer covers
the workspace with full-size guides: every dock slot shows a small, faint arrow, and the one
under the pointer lights up with the area the panel would take. A drop anywhere else keeps it
floating. The dock button, the title-bar right-click menu and View → Window layout dock as before. - Less CPU while nothing plays. Silent tracks and mixer inserts no longer cost anything in
each audio block: a stopped project uses almost no CPU, and big songs play with more headroom
(fewer crackles at small buffer sizes). - The loading screen shows the Synkopa logo above the progress bar.
Fixed
- Type in value works on pan and EQ Q. A centred pan (shown "C") and an EQ band's Q accept a
typed value instead of greying the item out. - A sample dropped on the Channel Rack is undone with its channel. One Ctrl+Z removes both,
and the file no longer stays in the project's audio list. A file loaded during a knob drag no
longer makes Ctrl+Z stop half-way through the drag. - Lane heights stay with their track. Undoing a Move up / down no longer hands a resized
lane's height to the other track, and undoing a rename keeps the height you gave the lane. - Plugin parameter sliders reset on Alt+click, as their menu says.
- Paint: a fast diagonal sweep paints every lane it crosses instead of filling the last one.
- A folder removed from the Browser forgets that it was open and is not read again.
- Zooming no longer fights the playhead. With Follow on and the song playing, every zoom
step (Ctrl+wheel, Page Up/Down, the presets, a zoom box, the scrollbar) now pauses following
instead of letting the view get yanked between the zoom's anchor and the playhead — the
left-and-right stutter while zooming is gone, in the Playlist and the Piano roll. - Closing the pitch editor returns to the sampler. The pitch editor of an audio clip used to
close the clip's editor window when it opened, so closing the pitch editor left nothing. The
editor now stays open underneath, and Esc closes the pitch editor first, then the editor —
also stopping a solo preview the pitch editor left ringing.
Synkopa (formerly WAVE): a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/synkopa/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the Synkopa Keys piano.
- Windows: there is no
.msiany more. If you installed it from an.msi, uninstall it and installSynkopa_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
synkopacommand line works after the first start (open a new terminal):synkopa status,synkopa context(the oldwavename still works), see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
Synkopa v0.9.23
Added
- Export a pattern on its own, as in FL Studio. The Export dialog has a Pattern range next to
Song and Loop: it renders the current pattern the way PAT mode plays it, with an empty
Playlist too, and leaves the project as it is. It is the default in PAT mode and while the
Playlist is empty. Choosing Song with an empty Playlist now warns that the file would be
silence and offers to export the pattern instead (it used to write a silent file). Mix and
stems both work; the command line hasrender --pattern. - Controls work like FL. Ctrl+drag adjusts finely, Alt+click resets, and a control's
right-click menu has Type in value. Grabbing a knob or fader again right after a drag no
longer resets it. - Mixer: select several tracks with Ctrl+Shift+click; their faders and mutes move together.
A right-click (or Ctrl/Alt+click) on a mute switch solos, in the Mixer and on Playlist tracks. - Playlist: a slice dragged up or down cuts every clip it crosses; the paint tool paints
wherever the pointer goes, also leftwards and on other tracks; tracks can be moved up and down
(their clips and automation follow). - Piano roll: Shift+Up/Down moves notes a semitone, Ctrl+Up/Down an octave, Shift+Left/Right
a grid step; Ctrl+V pastes where the notes were copied; with nothing selected, Ctrl+B / Ctrl+C
and the arrows take every note; a note sounds as long as you hold it, at its velocity;
right-drag in the velocity lane draws a ramp. - FL's shortcuts: Ctrl+D deselects, Ctrl+M switches the metronome, Alt+M mutes the selected
clips, Ctrl+N saves a new version beside the project (Beat → Beat_2). New project is
Ctrl+Shift+N. Export in place is in the File menu (Ctrl+Alt+E). - Synkopa remembers where you were: a saved project reopens on its pattern, channel and start
marker, and the Browser keeps its open folders and scroll position.
Changed
- The autosave never writes over your project. It used to save a saved project into its own
file every few minutes, so the version you saved yourself could be lost. Now it keeps a
recovery copy of the unsaved changes instead. If Synkopa closes unexpectedly, the next start
offers them back as that project, unsaved: save to keep them, or close without saving to keep
the file as you left it. - A new project's Kick, Clap, Hat and Snare play into mixer inserts 1–4, named after them,
like FL Studio's template, so a fader or effect there works on the drum straight away. - The keyboard goes where you work. A click in the Playlist takes the keyboard back from the
Browser's search box, so Space plays. Delete, Ctrl+X/C/V and the arrows edit clips only while
you work in the Playlist, never behind the Mixer or an editor. - PAT mode plays the pattern through its channels' own inserts, not through the effects of
the Playlist track its clip sits on. A press on the Playlist grid switches to SONG. - Clicks follow FL: the Channel Rack's left button lights steps and the right one clears
them; Up/Down pick the channel; two clicks on a channel name open and close its window. A
library sample plays on the press, from the top each time. Clicking the Browser or a docked
panel sends floating windows behind the workspace (F5 brings them back), one at a time. - Ruler: a click sets the start position, a drag draws the loop, Ctrl+drag moves the start
position. - Lane heights are not undo steps any more, and a right-click on empty Playlist space only
drops the selection. - A new logo: six staggered bars.
Fixed
- Clicking the Mixer no longer hides open effect windows or the floating Mixer.
- Piano roll: dragging an off-grid note up or down keeps its timing; changing the grid keeps the
note length; Delete and Ctrl+X only remove a selection; a click on empty grid deselects; a fast
velocity drag no longer skips notes. Notes drawn after a Channel Rack step stay steps, and
triplet hats stay steps in the rack. - Trimming a clip shorter than the grid no longer makes it longer.
- Dropping samples on the Channel Rack is one undo step.
- A click on the Playlist while playing no longer stops the view from following the playhead;
zooming no longer makes the view stutter between the zoom point and the playhead. - The sample editor stays open under its pitch editor; an audio clip's menu can add its sample
as a sampler channel. - Touching the sampler's envelope knobs no longer switches the envelope on by itself.
Synkopa (formerly WAVE): a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/synkopa/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the Synkopa Keys piano.
- Windows: there is no
.msiany more. If you installed it from an.msi, uninstall it and installSynkopa_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
synkopacommand line works after the first start (open a new terminal):synkopa status,synkopa context(the oldwavename still works), see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
Model: HTDemucs stem separation (v1)
Model file for Extract stems (#64). Not an app release: the app downloads this asset the first time stems are extracted; the updater only reads releases/latest, which never points at a pre-release.
htdemucs.onnx: Demucs v4 HTDemucs (4 stems: drums, bass, other, vocals), exported byscripts/export-htdemucs-onnx.py htdemucs out.onnx --fp16-weights(Demucs 4.0.1, opset 17). Weights stored as fp16, computed in fp32.- Size 90,358,774 bytes, SHA-256
4d199bd7f79b5c4a509871a05ec82e2b32a28148db31b811b7453896ce808660(pinned incrates/stems). - Licence: MIT, code and pretrained weights by Meta AI Research — https://github.com/facebookresearch/demucs/blob/main/LICENSE
Synkopa v0.9.22
Added
- One sample editor with a keyboard, as in FL Studio. The editor of an audio clip and of a
Channel Rack sampler now look and work the same: both end in a piano keyboard. Click a key
to hear the sample at that note; right-click a key to make it the root note (the note at
which the sample plays at its own pitch). The root key is lit and named, and the root shows
above the keyboard. An audio clip's root belongs to its sample (every clip of it shares it),
is saved with the project, and a sampler channel made from that sample starts on it. The
keyboards of Synkopa Keys and plugin channels set their root the same way. - A sampler's volume envelope, as in FL Studio. A sampler's editor has two pages: Sample
(the waveform, its part, pitch, level and the sample's own fades) and Envelope, the FL
Channel settings ▸ Volume page. Switch the envelope on and every note gets delay, attack,
hold, decay, sustain and release, drawn as a graph: drag a point sideways to change its time,
the sustain point up and down for the level, and the dot in a curve up or down to bend the
attack, decay or release. The same values are on knobs, and each drag is one undo step.
Dragging a point or turning a knob switches the envelope on. With it on, a note fades over
the release from its note-off: a key let go or the end of a Piano Roll note. Off, the sample
plays as recorded. A Channel Rack step still has no note-off and holds the sustain. - The first start offers the demo project. A fresh install asks once whether to open
OBSIDIAN 2093 or start empty. It does not ask after an update, or when Synkopa was started by
opening a project file.
Changed
- WAVE is now called Synkopa, with a new logo. Nothing of yours moves: settings, the library,
recordings and presets stay where they are, and the update replaces the WAVE install (its
shortcuts become Synkopa shortcuts). - Projects are saved as
.synkopa. Every.waveproject still opens, by double-click too, and
keeps its name until you save it under a new one. - The command line is
synkopa. The oldwavecommand keeps working, so existing scripts
need no change. - The sampler's One-shot / Gate switch is now the Envelope switch. Envelope off plays the
sample as recorded, as One-shot did, and no longer applies attack, decay and sustain: those
belong to the envelope. Envelope on works like Gate, and a sized Piano Roll note now fades over
the release from its end instead of stopping there. Projects keep their sound: a sampler that
was in Gate mode or had an attack or a sustain below 100 % opens with its envelope on. - The demo song OBSIDIAN 2093 has a reworked arrangement and mix: extra vocal and pad
layers, an 808 cymbal, a new 808 turnaround, a Warp move on the dark vocal and tighter filter
and reverb transitions.
Synkopa (formerly WAVE): a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/synkopa/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the Synkopa Keys piano.
- Windows: there is no
.msiany more. If you installed it from an.msi, uninstall it and installSynkopa_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
synkopacommand line works after the first start (open a new terminal):synkopa status,synkopa context(the oldwavename still works), see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
WAVE v0.9.21
Added
- A new demo song: OBSIDIAN 2093, a 40-bar modern trap track (136 BPM, D# minor) with a
punchy kick, a warm 808, melodic hooks and filter sweeps automated on a bus. Open it from
File → Open demo project, or pick it in Settings → General. Six new free (CC0) sounds come
with it in the standard library: an 808 spin, a crisp trap clap and snare, and three loops.
Fixed
- Linux: WAVE starts on Ubuntu 22.04 and Debian 12. The packages and the AppImage needed a
newer system library than those systems have and quit at once; they now run on any
distribution from Ubuntu 22.04 on. - The Playlist no longer goes blank after a scroll. Scrolling, or dragging a clip past the
edge so the view scrolls with it, could leave the Playlist empty but for a strip at its edge
(only fades showed) until something else made it redraw. It now always shows every clip and
the grid.
WAVE: a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/wave-DAW/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the WAVE Keys piano.
- Windows: there is no
.msiany more. If you installed WAVE from an.msi, uninstall it and installWAVE_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
wavecommand line works after the first start (open a new terminal):wave status,wave context, see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
WAVE v0.9.19
Added
- Triplet grids in the Piano roll. The Grid list has 1/6, 1/12, 1/24 and 1/48 (quarter,
eighth, 16th and 32nd triplets) next to the straight values, which now run from a whole bar
down to 1/64. Drawing, moving, resizing and Ctrl+Q quantize follow it, and the roll draws its
lines. Picking a grid also sets the next drawn note to one grid step (at most a beat). - The Mixer shows what each strip carries. A docked strip shows its effect count (● 3), and an
insert you have not named shows, quietly after its number, what is routed to it ("2 Hats").
Changed
- The browser has three tabs: Patterns, Audio and Library. Audio lists your own sounds
(imports, recordings, audio with clips in the Playlist); the starter kit samples the Channel
Rack plays stay in the rack, so a new project's Audio tab is empty. - Channel Rack steps keep their width. Resizing the window shows more or fewer steps (the
grid scrolls) instead of stretching or squeezing them. - "Automate on the playlist" uses a track that is free where the clip goes, not only a track
empty along the whole song; a new track is added at the bottom only when every track is busy
there. The Playlist scrolls to the new clip. - Clip edges and automation points are easier to grab. A clip's edge trims from a little
inside it and from just outside it; automation points are bigger, and the first and last
point sit whole inside the clip instead of half cut off by its border. - A right-click on empty Playlist space drops the selection (the menu still opens).
- The Channel Rack and the Piano roll share one window frame. Each title bar ends with the
same buttons in the same order: dock or float, maximize (Piano roll), close. The Piano roll's
maximize was only a double-click on its title bar; it now has a button too. - Esc closes the window in front, whichever kind it is. Before, the sample editor and the
channel settings closed first even behind a Channel Rack or Piano roll you were working in. - F5 (or a click on the Playlist) tucks away every floating window, the sample editor, the
channel settings and the pitch editor included; F5 again brings them all back. - The Mixer is a window like the Channel Rack and the Piano roll. It has the same title bar:
float it as a window or dock it back at the bottom, maximize it over the whole workspace
(or double-click its title bar), and × hides it. F9 shows and hides the Mixer, as in FL
Studio; floating behind other windows, F9 brings it to the front first. Esc hides it when it
is the window in front. The View menu has Dock Mixer at the bottom and Maximize mixer.
The separate Mix view with its Back button is gone: maximize does the same.
Fixed
- A channel's window opened from the Channel Rack (a click on its name) appeared behind the
rack, as did the Piano roll opened by a double-click. Every window now comes to the front
before what was clicked inside it opens another.
WAVE: a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/wave-DAW/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the WAVE Keys piano.
- Windows: there is no
.msiany more. If you installed WAVE from an.msi, uninstall it and installWAVE_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
wavecommand line works after the first start (open a new terminal):wave status,wave context, see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
WAVE v0.9.17
Added
- Trap sounds and melodic loops in the library. 38 new sounds you can use freely: five
808s tuned to their root, kicks, snares, claps, open and closed hats, percussion, impacts,
risers and sub drops, and a new Loops group of ten keys, piano, pluck, guitar, pad and flute
loops with their tempo and key in the name. - Drop a sample from anywhere onto the Channel Rack. Drag a file from Explorer or your web
browser, or a sample from Browser ▸ Project ▸ Audio: on a channel's edge it becomes a new
sampler there, on its middle it replaces the sample, below the channels it is added at the
end. The channel it lands on lights up while you drag. - Export in place. Right-click a clip (or press Ctrl+Alt+E) to render the selected clips,
with their mixer effects, into one audio clip on a new track right below them; the originals
are muted, and Ctrl+Z undoes it all. - Drag effects between mixer channels. Drag an effect onto another mixer strip to move it
there (with Ctrl to copy it), or drag the effect list's header to move the whole chain. - Stop twice to silence everything. A second Stop (or Ctrl+H) cuts reverb and delay tails,
held notes and the preview at once, without a click. - Windows at a click. Buttons for the Browser, the Channel Rack and the Piano roll sit in the
toolbar and light up when open. Click the pattern name in the toolbar, or a pattern in the
Browser, to see it in the Channel Rack; switching patterns shows a closed rack. - Double-click to jump to the mixer. Double-click the header of a sample or channel window,
or a track's icon, and the mixer opens on its channel. - Double-click a sample in Browser ▸ Project ▸ Audio to hear it.
- Live coding from a text file:
wave watch song.txt. Write the song aswavecommands
in a file (tempo, step patterns, effects…), start the loop and save: the song changes while
it plays, every time you save. The file is the song: remove a line and its effect is gone.
Each save is one undo step; a mistake in the file changes nothing and the terminal names the
line; an edit you make in WAVE meanwhile is not overwritten. Without the app,
wave -p song.wave watch song.txt --render preview.wavbounces a preview on every save.
Changed
- A sample's sound is shared by all its clips, as in FL Studio: volume, pan, pitch,
normalize, reverse and the mixer channel set in the sample window change every clip of that
sample. "Make unique" splits one off. - The mixer channel set in a sample window belongs to that sample, not to the whole
playlist track (the track's own routing is still in the track menu). - The song loops as soon as the last clip ends: an audio file a hair longer than its bars
no longer adds an empty bar. - Track numbers are gone from the playlist headers.
Fixed
- Notes you play are heard at once while the song is stopped. With a long look-ahead effect
such as the Vocal Rider in the mix, a plugin instrument could sound up to 1.6 s late. - "Open plugin GUI" opens the plugin's window in front of WAVE. It could open behind it and
look like nothing happened; the button now also follows the window when you close it, and a
plugin with no window of its own (WAVE Demo Synth) says so. - Hosted VST3 plugins can no longer repeat their previous block of audio, and effects no longer
do extra work on the audio thread.
WAVE: a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/wave-DAW/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the WAVE Keys piano.
- Windows: there is no
.msiany more. If you installed WAVE from an.msi, uninstall it and installWAVE_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
wavecommand line works after the first start (open a new terminal):wave status,wave context, see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
WAVE v0.9.15
Added
- Export stems as MP3. Choose Stems and MP3 in the Export dialog, pick a bitrate,
and get one file per mixer insert with sound, plus the optional master mix. - Share a project as a ZIP. File → Export project as ZIP packages the project and its referenced
audio so it can open from a new folder. Unzip it and open the included.wavefile. - Shape sampler hits with Fade In and Fade Out. Set fades at the edges of the selected
sample region. Step sequencer hits ring out while piano roll notes can follow the sampler gate. - Edit vocal pitch from the command line. Use
wave pitchto inspect vocal notes, preview
shifts and apply edits that open in WAVE's Pitch Editor.
Changed
- The Playlist, Piano Roll and Pitch Editor share the same time ruler and overview controls.
- The
wavecommand prints numbers with up to four decimal places.
Fixed
- Ctrl-drag starts a selection rectangle in the Playlist even when you start over a clip.
WAVE: a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/wave-DAW/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the WAVE Keys piano.
- Windows: there is no
.msiany more. If you installed WAVE from an.msi, uninstall it and installWAVE_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
wavecommand line works after the first start (open a new terminal):wave status,wave context, see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).
WAVE v0.9.14
Added
-
Edit and render projects from the command line without opening WAVE.
wave new song.wave
creates a project, andwave --project song.wave <command>(or-p) runs any edit or read on
the file and saves it back: change the tempo, write patterns, add effects, then
render --out mix.wavor--stemsfor batch bounces, build servers and AI agents.script edits.txtruns many commands with one load and one save, and writes nothing if a line fails.
--dry-runtries an edit without saving,--save-aswrites a copy. A file the app has open is
never overwritten behind its back. -
Wrap effect tails on WAV loops. Choose Wrap to hear the end of the delay and reverb at the start of the exported mix or stems. The file is one loop long.
-
Export 24-bit PCM WAV. Choose it for the mix or stems and enable dithering if needed. WAV defaults to 32-bit float.
-
Open
.waveprojects from Windows File Explorer. Projects have a document icon and open on double-click. If WAVE is already running, it brings the window forward and asks about unsaved changes before switching projects. -
Tune a vocal to the melody you played in the piano roll. Play a melody, sing along to it,
then in the Piano roll press ♪ Vocal reference (only the selected notes, or the whole
channel) — the vocal's pitch editor opens with that melody as its target. Or open the pitch
editor, choose To reference and pick the melody from Melodies in the project (they are
listed by how well they fit what you sang). The vocal keeps its own timing: singing a little
early or late is fine, the octave nearest your voice is used (a melody played an octave higher
just works), in a chord the note nearest your voice is taken, and ad-libs with nothing played
under them stay as sung. The melody is copied into the vocal, so changing the piano roll later
does not change it until you press Update. -
Correction you can understand: Strength, Speed and Flatten, with one-click styles
(Natural, Pop, Tight, Robot). Speed is how fast the voice is pulled onto the note — 0 ms is
the hard "robot" step, around 50 ms tight pop, 100 ms and more keeps the singer's own scoop. The
line under the controls says in words what Correct will do. A reference has its own Speed too. -
Play and loop in the pitch editor like in the Playlist. Click the ruler to move the start
marker (while playing, playback jumps there), drag it to set the loop, double-click to remove
the loop; Space or Play plays the song so you hear the vocal in the mix, and the view follows
playback. Solo plays the vocal alone, with your edits, from the marker. -
Pitch Correct one click away. The pitch editor, the sample window and a sampler channel's
window have a Pitch Correct button that puts the real-time tuner on that sound's mixer insert
(with the editor's key and scale), or opens it when it is already there. The sample window also
opens the pitch editor. -
Main volume knob next to Play and Stop, like FL Studio: it is the Master fader (drag, scroll,
double-click for 0 dB, right-click to automate). -
Reshape and generate notes in the Piano roll. A Tools strip in the header humanizes,
quantizes (optionally to the project's key), strums, fills a Euclidean rhythm, builds a drum
groove or writes a melody in the key. Every tool has a seed: the same seed always gives the
same notes, so you can try a few, keep the favourite and come back to it. The same tools are on
the command line (wave notes …,wave key). -
Copy sung notes to the Piano roll. In the pitch editor, Ctrl+C or Copy notes puts the
selected notes (or all) on the note clipboard; Ctrl+V pastes them into any pattern in time. -
Full-screen Piano roll, which remembers where you moved or resized it.
Changed
- A more compact toolbar and pitch editor header. Playlist lanes show their mixer channel only
when you routed them to one, and Make unique no longer creates a mixer insert.
Fixed
- VST3 presets restore correctly on systems whose language writes decimals with a comma
(German, Polish, Danish, French…): settings no longer jump to rounded values. - Melody, Euclid fill and Drum generators replace the channel's notes: applying again (with a
new seed or with notes selected) no longer stacks a second melody or doubles hits. - Humanize and Strum leave very quiet notes alone, and scale-aware quantize no longer fails on
the highest and lowest MIDI notes. - The Piano roll's key and scale follow the project after undo or opening another project.
- Double-clicking the project that is already open in File Explorer no longer asks to discard its
changes; WAVE no longer opens another project while recording; crash recovery is offered also
when WAVE starts by opening a file. - Closing WAVE, starting a new project or restarting for an update while a project is still
opening now says why it waits. - Pitch editor: Update melody appears and disappears correctly after Apply, Update and undo, and
Space or Delete in its Key, Scale or Reference list no longer starts playback or resets notes. - Command line:
wave bpm 90 --dry-run -p song.waveedits the file, not the project open in the
app (switches no longer swallow the word after them);save --pathinside a script is refused
instead of silently writing nothing;wave new --forcenever replaces a project the app has open. - Loop takes keep their recorded ending when you stop on the boundary. Starting partway through a loop also keeps the start of every following pass.
- The pitch editor's preview now plays your pitch edits (it used to play the original recording).
- The reference list no longer offers drum hits and one-shots: only recordings in the playlist or
a comp, at least a second long.
WAVE: a fast, FL-Studio-style DAW. Website and audio examples: https://miskibin.github.io/wave-DAW/
- The Windows installer is built with ASIO (Settings → Audio → ASIO) and includes the WAVE Keys piano.
- Windows: there is no
.msiany more. If you installed WAVE from an.msi, uninstall it and installWAVE_…_x64-setup.exeonce; updates then arrive by themselves. - Linux:
.AppImage(any distribution),.deb(Ubuntu, Debian, Mint) or.rpm(Fedora, openSUSE). - The interface is English by default; Polish is in Settings.
- The
wavecommand line works after the first start (open a new terminal):wave status,wave context, see docs/cli.md. - VST3 effects: Add effect → VST3… (the first scan may take a while).