Repository navigation
KoFEM v0.6.0
Meshing diagnostics and repairs, continuation for slow solves, and a public
Theory Guide.
Added
- A Theory Guide at
/theory/connects FEM fundamentals, units, elements,
loads, solving, stress interpretation, shells and topology optimization.
Worked examples, 27 figures and four interactive 3D result viewers connect
the explanations to the public verification cases. Theory and example
diagrams are available as image files for search engines and sharing. - Failed meshing highlights problem faces and straight hinges. Connect
and Separate repair supported hinges, Split face handles sharp cone
tips, and Remove narrow faces can remove details smaller than the
minimum element size. Repairs can be undone. - Continue / Stop lets a progressing solid, shell or coupled solve run
beyond its iteration budget. Continue adds an adjustable number of
iterations to the live solve; Stop discards the partial result.
Changed
- Meshing stops before the volume fill when a boundary face could not be
meshed. Previously, these failures could crash, report misleading overlaps,
or return an incomplete volume mesh. Re-mesh and re-solve affected models;
a newly reported failure may identify a mesh the previous version accepted
incorrectly. Degenerate-edge fixes can also change the generated mesh. - Geometry repairs can change results. Connect adds material, Separate
removes it, and removing narrow faces changes the local shape. Inspect the
repaired geometry, supports and loads, then re-mesh and re-solve. Splitting
a cone tip preserves its shape but can change face numbering. Existing
saved results do not update automatically. - Continued solves retain their iterate, search direction, preconditioner
and original convergence tolerance. Tests match uninterrupted results;
stalled solves still fail, and unconverged fields are not accepted.
Fixed
- Meshing no longer traps on degenerate CAD edges with no 3D curve.
- Large overlap reports no longer flood the page log and freeze the UI.
- Connect repairs can recover an invalid fuse by merging faces on the same
surface, while leaving already valid fuses intact. - Failed narrow-face meshes are reported with their face widths instead of
raw Netgen geometry-search errors or false overlap reports.
Known limitations
- Coarse linear tetrahedra can make thin-walled models too stiff. Use
quadratic elements or an appropriate Shell idealisation and check
convergence. This release does not add the proposed thin-wall warning or
change the default element order. - Only one body per model can be a Shell. The planar shell/solid transition
checks do not establish junction-stress accuracy for every geometry or
generic distributing coupling. - Some geometry still needs correction in CAD. The repair actions do not
establish the accuracy or suitability of the repaired engineering model.