Skip to content

Ultimate 2.25.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 06:36
9c0b836

What's new in 2.25.0

  • New: see through your other devices' cameras with Octopus Mesh, no addresses or browsers. On the device that has the camera, open Octopus Mesh, turn on "Lend this phone", then "Let my other devices see through this camera". It keeps a notification up the whole time that says who is watching and has Stop on it, and it only uses the back camera.
  • Then, on any other device in the mesh, tap Watch camera on that device: in the Octopus Mesh screen, in the "Your devices" list on the Movement recording screen, or on the Cameras page (your phone's address plus /cameras, from a computer or the Quest), which now lists your devices as buttons you can tap. Their pictures appear in the small camera windows on the recording screen (now up to three at once, stacked and draggable) and in the Cameras grid.
  • How it works, and what it can't do: the mesh carries short messages, so a picture is sent in a few small pieces and put back together here, pulled one at a time (a slow connection shows older pictures instead of piling up, and a camera nobody is watching works only about every two seconds). Expect roughly three or four pictures a second at 480 pixels wide, a little behind. It works wherever your devices can reach each other on the mesh (the same Wi-Fi, or a VPN that joins them), not across the open internet. Android does not let an app open a camera that nobody switched on, so you switch it on once on the camera device (from its own screen), and it does not turn itself on again after that phone restarts.
  • Tested with unit tests (cutting a picture into pieces and putting it back exactly, a replaced or damaged picture never producing a wrong one, every message staying under the mesh's size limit, the mesh's other tests still passing), release lint, and the Cameras page in a browser (tapping a device starts its tile and tapping again stops it). Not yet tried between two real devices: the camera sharing itself, its notification, and the picture rate.

Which file do I want?

  • Ultimate-Plus: everything, including the SSH client and server, sending files to your computer and network tools. Needs internet permission.
  • Ultimate: the same tools without any internet permission. It cannot send anything anywhere.
  • Studio, Squeeze, Video-to-Audio, Pluck, Traffic-Inspector: single-purpose apps.
  • Ultimate-Plus-Watch: for a Wear OS watch (such as a Galaxy Watch), alongside Ultimate-Plus on the phone. Install it on the watch; Ultimate+ → Watch on the phone shows how.

Install

Download an APK on your phone, open it and allow installing from your browser when asked. Android 10 or newer.
Updating over an older build keeps your data when both were signed by this project's key.

Check the download

SHA256SUMS.txt lists each file's SHA-256. Every APK is signed with the certificate whose SHA-256 is:

d2143ab20357ef4678fe3e4f87197860b3e6121fc1342591993bf7b8086bfd7d