Repository navigation
Releases
v1.2.3-rc.1
Pre-release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
- docs: fix feed URL to explicit feed-3; fix upgrade reconnect guard (#538 #515) by @mralinp in #612
- feat(telephony): SMS messages, phone book, factory reset and landing page by @mralinp in #613
- fix: LuCI System page saves and opkg update reaches the x28 feed by @mralinp in #615
- fix(update): retry opkg downloads after a dropped transfer by @mralinp in #620
- chore: bring the v1.2.1 and v1.2.2 hotfixes (#615, #620) back into develop by @mralinp in #618
Full Changelog: v1.2.0-rc.5...v1.2.3-rc.1
v1.2.2
Stable release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
Full Changelog: v1.2.1...v1.2.2
v1.2.1
Stable release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
Full Changelog: v1.2.0...v1.2.1
v1.2.0
Stable release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
- feat(site): redesign the landing page by @mralinp in #569
- docs(readme): link the Sisoog article series by @mralinp in #572
- fix(readme): count only firmware releases in the downloads badge by @mralinp in #574
- fix(site): count only installable releases as downloads by @mralinp in #576
- docs(site): project wiki as Markdown pages on the website by @mralinp in #578
- docs(vendor): gap table of every stock UI command against the native image by @mralinp in #588
- fix(modem): manual network scan reads the AT socket, not mipc_wan_cli by @mralinp in #590
- chore(docs): relax the hardware rules now that we run our own firmware by @mralinp in #592
- fix(adapter): an empty band or network mode option undoes an earlier lock by @mralinp in #594
- docs(testing): reset button, reset, restore and signed flash on the test unit (#551) by @mralinp in #595
- docs(research): where the unit's RAM goes: Wi-Fi 140 MiB, modem 256 MiB (#299, #301) by @mralinp in #596
- feat(wifi): whnat option to switch the Wi-Fi offload engine off by @mralinp in #598
- feat(wifi): performance option, the vendor's Wi-Fi Performance Mode by @mralinp in #601
- docs(memory): md1rom is not mapped for Linux, record the probe attempt by @mralinp in #604
- docs(memory): name the md1rom regions from the modem image header by @mralinp in #605
- docs: clean-room and reverse-engineering rules, publish provenance by @mralinp in #608
- chore: bring the main hotfix (#567) back into develop by @mralinp in #610
- docs: fix feed URL to explicit feed-3; fix upgrade reconnect guard (#538 #515) by @mralinp in #612
- feat(telephony): SMS messages, phone book, factory reset and landing page by @mralinp in #613
Full Changelog: v1.1.1...v1.2.0
v1.2.0-rc.5
Pre-release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
- chore(release): publish v1.1.0 by @mralinp in #560
- fix: report upgrade failures and initialize the phonebook store by @mralinp in #567
- docs(memory): md1rom is not mapped for Linux, record the probe attempt by @mralinp in #604
- docs(memory): name the md1rom regions from the modem image header by @mralinp in #605
- docs: clean-room and reverse-engineering rules, publish provenance by @mralinp in #608
- chore: bring the main hotfix (#567) back into develop by @mralinp in #610
Full Changelog: v1.2.0-rc.4...v1.2.0-rc.5
v1.2.0-rc.4
Pre-release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
Full Changelog: v1.2.0-rc.3...v1.2.0-rc.4
v1.2.0-rc.3
Pre-release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
- docs(testing): reset button, reset, restore and signed flash on the test unit (#551) by @mralinp in #595
- docs(research): where the unit's RAM goes: Wi-Fi 140 MiB, modem 256 MiB (#299, #301) by @mralinp in #596
- feat(wifi): whnat option to switch the Wi-Fi offload engine off by @mralinp in #598
Full Changelog: v1.2.0-rc.2...v1.2.0-rc.3
v1.2.0-rc.2
Pre-release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
- chore(docs): relax the hardware rules now that we run our own firmware by @mralinp in #592
- fix(adapter): an empty band or network mode option undoes an earlier lock by @mralinp in #594
Full Changelog: v1.2.0-rc.1...v1.2.0-rc.2
v1.2.0-rc.1
Pre-release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
- chore(release): publish first stable v1.0.0 by @mralinp in #533
- docs(readme): simplify setup and include screenshots by @mralinp in #539
- docs: add total release download badge by @mralinp in #541
- fix(feed): pin package feed URL after v1.0.0 (hotfix) by @mralinp in #548
- chore(release): sync main's hotfixes into develop before v1.1.0 by @mralinp in #559
- chore(release): record main's ancestry in develop before v1.1.0 by @mralinp in #563
- chore(release): preserve main ancestry to unblock v1.1.0 by @mralinp in #565
- chore(release): restore main parent after squashed sync by @mralinp in #566
- feat(site): redesign the landing page by @mralinp in #569
- docs(readme): link the Sisoog article series by @mralinp in #572
- fix(readme): count only firmware releases in the downloads badge by @mralinp in #574
- fix(site): count only installable releases as downloads by @mralinp in #576
- docs(site): project wiki as Markdown pages on the website by @mralinp in #578
- docs(vendor): gap table of every stock UI command against the native image by @mralinp in #588
- fix(modem): manual network scan reads the AT socket, not mipc_wan_cli by @mralinp in #590
Full Changelog: v1.1.0-rc.1...v1.2.0-rc.1
v1.1.1
Stable release.
The attached assembly bundle holds the open OpenWrt 23.05.5 userspace, our package
files, kernel modules and extra packages. It does not boot the X28 by itself: the stock kernel and vendor
binaries are added by the flasher from your own unit's backup. The native image has been flashed to slot A and boots on one tested unit; flashing it
is a guarded, owner-approved procedure that needs UART and a verified backup. The flasher is the
separate mralinp/x28-flasher repo. See docs/BUILD.md,
docs/RECOVERY.md and CHANGELOG.md.
What's Changed
Full Changelog: v1.1.0...v1.1.1