Repository navigation
Releases
FrankyRenderer 1.2.2
Important
After updating, run Install.cmd once more as administrator. It cleans up old files in the install folder.
Settings are now saved in one file: %APPDATA%\FrankyRenderer\Settings.ini. Backups made with older versions no longer work. Make a new backup after updating.
Optional: Backup Settings.cmd in the install folder saves your settings there as Settings.ini, Import Settings.cmd restores them.
Added
- "Use Dolby Vision" (HDR): off plays Dolby Vision as HDR10 or HLG.
- "Vertical Image Position" (Black Bars & Zoom): center, bottom or top.
- "Statistics Text Size" for Ctrl+J (#30).
- SSimDownscaler_AR shader with anti-ringing.
- Ctrl+J shows gamma, GPU and audio clock drift (#34, #36).
- The version next to the name in the settings window (#33).
Changed
- All settings are in one file, %APPDATA%\FrankyRenderer\Settings.ini, with import and export on the Profiles page (#33).
- Black bars are detected once and then only grow.
- Better frame timing without Smooth Motion.
Fixed
- The player's playback speed being ignored (#43).
- Stutter with videos faster than the display (#36), with Smooth Motion at a matching frame rate and after the display mode change.
- Slanted picture with some software decoders at odd video widths.
- Frame stepping (Ctrl+Right / Ctrl+Left) in MPC-HC and MPC-BE.
- Ctrl+J showing deinterlacing as off with RTX Video HDR (#31).
FrankyRenderer 1.2.1
Added
- Keyboard shortcuts (new Shortcuts page): any setting can get a key.
- "Switch Windows HDR": turns Windows HDR on for HDR videos and off for SDR videos.
- Your own shaders in shaders\Custom (mpv .glsl/.hook, packs such as Anime4K). Shaders now run in an automatic order.
- "Statistics in Video Area": Ctrl+J sits at the edge of the picture instead of in the black bars.
- "LUT from Video Folder": uses a .cube file next to the video (#25).
- Diagnostics: Diagnostic Log and Save Report for bug reports.
- Error diffusion dithering and the Clamped Mitchell frame mixer for Smooth Motion.
- "Remember Last Page": the settings window reopens where it was closed.
- MPC-HC support from version 2.8.5.14.
- Ctrl+J shows custom scalers in detail and "Render" as a recent average.
Fixed
- RTX Video: no more broken pictures, ghost images, stutter or GPU spikes. RTX HDR now also works for small videos, and Super Resolution no longer turns off with it (#19).
- Black picture with sound when SVP/VapourSynth reconnects during playback.
- Upside-down picture with DirectVobSub and other RGB filters (#16).
- Aspect ratio, stretch and zoom of MPC-HC and MPC-BE having no effect.
- Stretched subtitles in MPC-BE (#28).
- No picture and no sound with Smooth Motion on some TV streams (#24); short stutter after seeking.
- Settings from PotPlayer's Preferences not applying to the playing video (#20).
- Black bar detection zooming in on dark sides of a scene, or missing the bars when the film starts with a logo (removed "Keep a Stable Zoom").
- The chosen tone mapping function being silently replaced by Spline (removed "Clipping Protection").
- Shaders that take long to compile freezing the picture.
- Chinese menu text mixing bold and thin characters (#17).
- One invalid setting resetting the whole display profile.
- Higher CPU load per frame and a sluggish settings menu.
FrankyRenderer 1.2
- Added: HDR mode "Tone Map HDR to Display Peak": keeps HDR output but rolls off highlights above the display's peak, for monitors and laptops that do not tone map themselves. The target is "HDR Target Peak", or the peak Windows reports for the display when set to 0 (#6).
- Added: A new settings UI with themes.
- Added: Translations for the settings menu (Weblate). Language choice under General > Themes.
- Added: A quality preset (Fast / Default / High Quality) in the settings header, or "Measure this PC" to pick the best settings for the display's GPU, including active shaders, Adaptive Sharpen and Smooth Motion.
- Added: A Reset All button in the settings header.
- Added: Shaders: RAVU Zoom R3 and RAVU Zoom AR R3.
- Added: XySubFilter support.
- Added: RTX Video HDR for SDR videos (NVIDIA RTX, Windows HDR on).
- Added: Smooth Motion setting "Present in Advance" (Scaling > Filters), like madVR's "present several frames in advance": 1 to 4 refreshes, or Automatic. Automatic keeps the lowest latency (one refresh) and only presents further ahead after pictures actually miss their refresh, then returns to one after a quiet minute.
- Added: Smooth Motion setting "Oversample Threshold" (Scaling > Filters): shows a whole picture instead of a blend when the other picture would cover only a small share of a refresh, for fewer double edges on motion. 0 keeps the previous behaviour.
- Added: Menu languages: German and Chinese (Simplified).
- Added: Profiles. Videos from folders you choose can get their own settings, for example a different upscaler for anime. A profile can change any setting in the menu.
• Click "+" on the Profiles page to create a profile, then add one or more folders. Videos in these folders use the profile, all other videos use your normal settings ("Default").
• At the top of the menu, next to Quality, choose which profile you want to change. All pages then change that profile.
• A profile only remembers what you change in it. Everything else comes from Default.
• Ctrl+J shows which profile a video uses.
• Choosing the display whose normal settings the menu shows is on the Profiles page. - Added: Display settings (Color > Calibration): "Display Gamut" maps colours into a wide-gamut display's native gamut (BT.709, SMPTE C, EBU / PAL, BT.2020, DCI-P3 (DCI white) or P3-D65 (Display P3)) so they do not look oversaturated. "Display Gamma" tells the renderer how the display decodes the signal (Auto, 1.80 to 2.80 in steps of 0.05, or BT.1886 with the display's measured contrast) and is used when HDR is tone mapped to SDR. "SDR Gamma Processing" can make SDR look like a chosen gamma (1.80 to 2.80 in steps of 0.05) on that display; when it is off, SDR stays as before.
- Added: Switch "Same Settings on All Displays" (Profiles > Default): copies the chosen display's settings to all displays and keeps them equal while on. Turned off, every display keeps those settings and can be changed alone again.
- Fixed: Dolby Vision Profile 7 on UHD Blu-ray: the enhancement layer is now used when playing a BDMV
.m2tsclip or.mplsplaylist, which carry no Dolby Vision descriptor (#5). - Fixed: The Dolby Vision status for Profile 7 discs that are flagged as FEL but add no residual: they are now shown as MEL processing instead of "FEL not processed" (#5).
- Fixed: A washed-out picture with "Prefer 16-bit Float" output when Windows HDR is off: SDR white was written above the display's white level and clipped.
- Fixed: End credits being detected as black bars and cropped.
- Fixed: Smooth Motion slowly falling behind during long playback: render peaks above 100 % in the statistics, blocking presents and dropped frames that only went away after pausing. The audio clock and the display drift apart, and surplus pictures piled up in the display queue. Smooth Motion now presents every picture on its own display refresh and leaves out or repeats a single interpolated picture when the clocks drift.
- Fixed: SSIM Downscaler, AMD CAS, Anti-Ringing and PixelClipper being skipped with "Prefer 16-bit Float" output ("output-stage shaders bypassed for linear scRGB"). They run during scaling, before the output conversion, and now work the same as with 10-bit output.
- Fixed: Two settings menu icons shown as empty boxes on Windows 10 (#10). The sidebar now uses icons that every Windows 10 and 11 version has, with new icons for Processing, Scaling and Shaders.
- Fixed: SSimDownscaler oversharpening with visible ringing, especially at strong downscaling: it now uses igv's original shader instead of the PlayKit variant and downscales in gamma light as recommended for mpv. Mitchell works best as the base downscaler.
- Fixed: Double edges on moving objects in a paused picture with Smooth Motion: paused and redrawn pictures now show the current frame instead of the last blend of two frames.
- Fixed: The menu not following a Chinese Windows display language (zh-CN and similar now find the Simplified Chinese translation).
- Fixed: The "Allowed Modes" description and the list of display modes under it staying in English in translated menus.
- Fixed: The Ctrl+J statistics dropping frames: updating the overlay stalled rendering for about 14 ms four times a second.
- Fixed: Text fields changing their font while typing.
- Smaller download (about 16 MB instead of 20 MB): FFmpeg is now built with only what Dolby Vision processing needs (HEVC decoding and MKV/MP4/TS reading).
- Clearer Ctrl+J statistics: grouped into Display, Video, Processing and Performance with aligned columns, and colour for render load, drops and Dolby Vision. Render time is now shown against the time available per picture, and the box no longer changes size while the numbers change.
- Quality selector shows "Measured" after a measurement and "Custom" as soon as any setting changes. "Custom" is always the last entry and brings back your own settings after you tried a preset.
- The player stays usable while the settings menu is open: pause, seek or switch to fullscreen and compare settings live. The menu closes itself when the player opens another file or closes, and opening it again brings the open menu forward.
- "Render peak 5s" in Ctrl+J is now coloured only when pictures were actually lost; a slow picture the display queue absorbed shows as "absorbed by queue". In the Drops row only counts above zero are coloured.
- Settings menu buttons and text fields use the same font size as the choice boxes.
- Cancel in the settings menu now also restores profiles: their settings, folders, displays and names, and profiles added or deleted.
- Choice lists in the settings menu are only as wide as their text.
- Ctrl+J shows "Default" instead of "none" when a video uses no profile.
- Shader settings that only know 0 or 1 (e.g. SHARP in AiUpscale) are now on/off switches instead of number fields.
- Shaders are switched on only in the shader list; the extra "Enabled" switch in each shader's settings is gone. Reset Shader now resets only its settings.
- Updated FFmpeg to the latest LAV-maintained version (4 November 2026), including newer HEVC decoding and fixes for Dolby Vision metadata and RPU parsing.
- Updated libplacebo with fixes made after version 7.387.0: more accurate colour conversion for PQ, HLG and the black level, ICC profiles without a brightness value, and a Smooth Motion queue fix.
- Settings menu: the tabs no longer run into the Reset buttons in translated menus, there is more space and a thin line below the top bar, even spacing between the buttons at the top, narrower choice lists, and the search box no longer shows the Ctrl+F hint.
FrankyRenderer 1.1
Important upgrade information
- One ZIP for both players: MPC-BE and PotPlayer now use the same native FrankyRenderer package. There are no separate player packages and no MPC Video Renderer compatibility registration.
- Recommended upgrade: Export your settings, close all players and uninstall the previous FrankyRenderer package using its
Uninstall.cmd. Then extract the new ZIP to a permanent folder and runInstall.cmd. Keep external ICC/LUT files if you use them. - PotPlayer requires the beta with native support: Use PotPlayer 261030 Beta 64-bit or a newer build with native FrankyRenderer support. Select FrankyRenderer, in the player's video renderer settings.
- MPC-BE: Use a recent nightly build with native FrankyRenderer support and select FrankyRenderer.
Changes
- Fixed AviSynth sources being reopened by Dolby Vision probing (#2).
- Fixed cropped screenshots and "Save displayed image" errors in MPC-BE.
- Fixed settings changed before playback not applying to the display profile (#3).
- One native package for MPC-BE and PotPlayer 261030 Beta 64-bit with native FrankyRenderer support; removed the MPC Video Renderer compatibility registration.
- Fixed a brief white properties window when opening the settings menu in MPC-BE.
- Fixed regular single frame drops during playback, most noticeable with Smooth Motion.
- Fixed bursts of dropped frames when switching to fullscreen or another display, resizing the window or toggling statistics with Ctrl+J.
- Fixed missing frames after Stop and Play or a decoder change.
- Fixed the first picture being shown twice after starting playback or seeking while paused.
- Fixed failed rendering and screenshots of interlaced video with hardware decoding at native size on some systems.
- Number fields in the settings menu now apply with Enter, Tab or when leaving the field; Escape restores the previous value.
- Settings previewed in an open settings dialog are reverted on the next start if the player closes unexpectedly.
- One invalid stored setting no longer resets the whole display profile.
- Faster live preview while dragging sliders with an ICC profile or 3D LUT enabled.
- Fixed a possible crash when the player closes the settings while a list or file dialog is open.
- Settings menu: Reset Shader resets only the selected shader; clearer messages for missing ICC/LUT files and other small fixes.
- Dolby Vision Profile 5 and 8 metadata is now applied even when the player's decoder does not pass it on (for example PotPlayer's built-in decoder), instead of falling back to HDR10.
- HDR10 and HDR10+ metadata is now applied even when the player's decoder does not pass it on (for example PotPlayer's CUDA decoder), including the HDR10+ tone-mapping curve.
- New: display mode switching in fullscreen like madVR. Each display profile has its own list of allowed modes (for example 2160p23, 2160p24, 2160p50, 2160p60), the original mode is restored when leaving fullscreen or stopping, and playback can pause for an adjustable time while the TV resynchronises (General & Presentation > Display Mode).
FrankyRenderer 1.0.9
- Native MPC-BE support: Recent MPC-BE nightly builds include FrankyRenderer as a separate renderer option. Use the MPC-BE package.
- Separate PotPlayer package: Select MPC Video Renderer in PotPlayer.
- Added Dolby Vision Profile 7 FEL/MEL processing for supported local progressive files.
- Fixed frame refresh when seeking while paused in MPC-BE.
- Fixed black screens when changing files in MPC-BE.
- Fixed leftover black areas after file changes in MPC-BE.
- Improved fullscreen file transitions and cursor handling.
- Made the settings window more compact and improved window resizing.
- Corrected false repeat/glitch counts across integer and fractional frame rates.
- Added 4-bit and 5-bit dithering options.
- Fixed uninstallation when the installation backup is missing.
- Added Dolby Vision profile, FEL/MEL processing status and output format to the Ctrl+J statistics.
- Enabled Smooth Motion for Dolby Vision Profile 7 FEL/MEL.
- Removed fixed base-layer and enhancement-layer resolution requirements.
FrankyRenderer 1.0.8 — Developer test build (native CLSID)
Developer test build — native CLSID integration
For player developers testing native FrankyRenderer integration. Requires a player build with native FrankyRenderer support; not intended for general use.
- Fix player rotation and mirroring commands having no effect.
- Preserve the correct aspect ratio for rotated video, including Smooth Motion.
- Add GPU pixel and renderer-interface regression tests.
Uses only FrankyRenderer’s dedicated CLSID. MPC-HC player integration changes are maintained separately and are not included in this renderer ZIP.
FrankyRenderer — Developer test build (native CLSID)
Developer test build — native CLSID integration
For player developers testing native FrankyRenderer integration. Not intended for general use.
- Registers only FrankyRenderer’s dedicated renderer CLSID:
{B864E92A-1BDF-4DA1-9004-CBF467DF239A}. - Removes the MPC Video Renderer compatibility registration.
- Renames the renderer binary to
FrankyRenderer.ax.
FrankyRenderer 1.0.6
Updated libplacebo to the official v7.387.0 release
Fixed screenshot saving during playback and while paused. Native MPC-HC integration is pending review in PR #4356 and is not yet available in official MPC-HC releases.
FrankyRenderer 1.0.5
- Updated libplacebo to development snapshot 7.387.0, including upstream fixes and revised HDR tone mapping.
- Adapted Smooth Motion timing and Dolby Vision metadata handling to the updated library.
- Added optional image analysis with waveform, histogram, RGB parade, false color and grayscale test ramp.
FrankyRenderer 1.0.4
- Added NVIDIA RTX Video Super Resolution through the driver. Enable Super Resolution and choose quality in the NVIDIA app, then enable it under Scaling.
- Removed obsolete settings dialogs, unused Windows-HDR toggle code and stale test targets; the renderer is about 12% smaller.
- Fixed restoring the default Max Frames in Flight value during HDR passthrough; corrected the display-profile persistence test.
- Fixed brief wait-cursor flashes and keyboard focus loss during episode transitions in PotPlayer.