Repository navigation
Releases
自动翻页 1.0.1.1 · AutoSwipe
更新级别:建议
一句话:界面、安装器提示、系统无障碍说明、README 和这个发布页,现在都是中英双语。
1. 双语补齐(安卓)
- 安装器的失败原因全部走
tr():下载地址不在白名单、文件太小、下载不完整、不是安装包、包名不对、版本对不上、没法交给系统——英文界面下不会再冒中文。 - 新增
values-en/strings.xml:系统「无障碍」设置里这一项的服务名与说明、桌面上的应用名,在英文系统下显示英文。
这一处跟随系统语言,不受应用内切换影响(系统页面没法被单个应用改写)。
2. 文档与发布页(仓库)
- README 改成中英对等两版(467 行):来源与署名三条、权限、滑动细节、两级设置、隐私、更新机制、安装、构建、目录、FAQ、维护节奏都有英文版,顶部加语言跳转。
使用说明.txt补了英文附录,装完直接看的那份也是双语。- 以后每个发布页正文都是「中文段 +
## English · Release Notes段」,应用按当前语言取对应那段,取不到就退回另一段。
3. 版本
- 1.0.1.0 → 1.0.1.1,只动最后一段;versionCode
1000101。 - 覆盖安装即可,不用卸载;设置和悬浮球位置都保留。
English · Release Notes
Level: recommended
In one line: the UI, installer messages, the system accessibility description, the README and these release notes now ship in both Chinese and English.
1. Localisation completed (Android)
- Every installer failure reason now goes through
tr()— disallowed download URL, file too small, incomplete download, not an APK, wrong package name, version mismatch, handing it to the system failed. No Chinese leaks into an English UI. - New
values-en/strings.xml: the accessibility service name and description shown in the system's Accessibility settings, plus the launcher label, render in English on an English system. Those follow the system locale; an app cannot rewrite the system page.
2. Documentation and release pages
- The README is now two peer versions rather than a summary: provenance and the three credit requirements, permissions, gesture details, two-level settings, privacy, update mechanism, install, build, layout, FAQ, maintenance cadence — all in English, with a language link at the top.
- The plain-text user guide gained an English appendix.
- From now on every release body is "Chinese section +
## English · Release Notes", and the app picks the section matching your language, falling back to the other one.
3. Version
- 1.0.1.0 → 1.0.1.1, last segment only; versionCode
1000101. - Installs over the old version; settings and ball position are kept.
自动翻页 1.0.1.0
更新级别:建议
一句话:设置改成两级页面——语言、外观、悬浮球、息屏暂停、更新方式与源全部可调且立即生效,另加「关于与开源信息」二级页。
1. 两级设置页(安卓)
齿轮进入设置:一级分组列表,底部「关于与开源信息」进入二级页;右上角「完成」关闭,二级页返回键先回一级。
2. 界面语言 中文 / English(安卓)
切换立即生效,不用重启:首页、设置、关于、更新弹窗、Toast 全部跟着换。默认按系统语言选一次,之后记住你的选择。
3. 每一项都真的起作用(安卓)
- 外观:跟随系统 / 浅色 / 深色即时生效,深色下状态栏与导航栏图标自动转白;
- 悬浮球:显示 / 隐藏,隐藏时正在跑的循环一并停;
- 新增「息屏时自动暂停」开关,默认开;
- 更新检查方式(自动 / 手动)与更新源(Gitee / GitHub)直接写入更新器读取的偏好;
- 版本行右侧「检查更新」当场发起一次检查。
4. 关于与开源信息(安卓)
二级页写明版本、用途、署名三条、AGPL-3.0-or-later 与第 7 条 (b) 附加条款、GitHub / Gitee 仓库地址(可点开,打不开浏览器则复制链接)、权限清单与第三方组件清单。
安装
覆盖安装即可,不用先卸载。
自动翻页 1.0.0.2
更新级别:建议
一句话:滑动改成真人手感——起止位置每拍小幅漂移、轨迹带轻微弯曲,先慢、中间快、收尾缓,手指全程不抬起。
1. 滑动轨迹更像真人(安卓)
起点在横向 40%–60%、纵向 73.5%–80% 里随机取,终点在 27.5%–34.5% 里随机取,起止横向差最多 5% 屏宽。轨迹带 0.6%–1.6% 屏宽的 S 形弯曲和 0.2%–0.7% 屏宽的细波动,方向与强弱每拍都不同。纵向严格单调向上,漂移有上限——有变化,但每一次都还是一次有效上滑,不会漂到侧边栏或导航条上。
2. 真实的变速(安卓)
整条轨迹按「起步 30% 距离 / 42% 时间、主体 50% / 36%、收尾 20% / 22%」切三段,用 willContinue 连续笔画串起来,手指全程不抬起,所以是先慢、中间快、末尾缓的一整次滑动,而不是三次独立滑动。
3. 时长与兜底(安卓)
单次总时长改为 0.38–0.64 秒随机(原来固定 0.32–0.52 秒)。新增手势回调超时兜底:某一段的回调没回来时主动派生一个 1px 收尾笔画抬手,不会把手指按在屏幕上。
安装
覆盖安装即可,不用先卸载。首次使用仍需在系统里开无障碍与悬浮窗(Android 13+ 侧载应用要先「允许受限设置」)。