Skip to content

Releases

py-imposition 0.10.3

Choose a tag to compare

@nivaca nivaca released this 18 Nov 01:01

PDF/A and PDF/X are made by pdf2iso, the new name of py-pdfconform (https://github.com/nivaca/pdf2iso). The program looks for pdf2iso first and still finds py-pdfconform, so an older installation keeps working. A path given in the settings is kept.

Los PDF/A y PDF/X los hace pdf2iso, el nombre nuevo de py-pdfconform (https://github.com/nivaca/pdf2iso). El programa busca primero pdf2iso y sigue encontrando py-pdfconform, así que una instalación anterior sigue funcionando. Una ruta indicada en los ajustes se conserva.

py-imposition 0.10.2

Choose a tag to compare

@nivaca nivaca released this 17 Nov 17:24

What's new in 0.10.2

  • Gutters only move the pages. The size of the pages now comes from the sheet and the margins alone: a wider gutter spreads the pages apart and a narrower one brings them together, without changing their size. Before, once there was no spare space at the outside (with negative margins, for example), a wider gutter made the pages smaller instead. impose warns when the gutters push the pages off the sheet.
  • Each session starts with the default settings. The options of the commands (basic mode included), the toolbar preferences, the sequence and the margin locks are no longer restored when the window starts; save the settings you want back as a profile. The window still keeps its size and layout, its mode, Auto preview, the profiles and the recent documents.

py-imposition needs Python 3.15 or later (the AppImage brings its own).

The RPM is signed with the key 8187 0643 CA22 1AF9 0C30 554E BE68 32CD 3599 4948, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.10.2-py3-none-any.whl.

py-imposition 0.10.1

Choose a tag to compare

@nivaca nivaca released this 17 Nov 17:12

What's new in 0.10.1

  • Negative margins work. A negative margin now makes the pages grow until they run off the sheet by that much on that side; what runs off is cut at the edge. Since the pages keep their proportions, negative left and right margins also make them run off at the top and bottom (and the other way round). Before, negative left and right margins did nothing when the page height set the scale.
  • The fold stays in the middle. In booklets, uneven left and right margins count as the larger one on both sides, so the fold is always in the middle of the sheet.

py-imposition needs Python 3.15 or later (the AppImage brings its own).

The RPM is signed with the key 8187 0643 CA22 1AF9 0C30 554E BE68 32CD 3599 4948, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.10.1-py3-none-any.whl.

py-imposition 0.10

Choose a tag to compare

@nivaca nivaca released this 17 Nov 16:52

What's new in 0.10

  • Exact gutters. impose (and the window's basic mode) now places the pages together as one block, with exactly the gutters between them, centred within the margins. Space left over goes to the outside, so the margins are a minimum and a wider gutter no longer takes space from them; in a booklet, the fold falls in the middle of the gutter. Before, each page was centred in its own place, so the real gap between pages was larger than the gutter.
  • The preview keeps its page. When a result is made again (after changing an option, for example), the preview stays on the page being looked at instead of going back to the first.
  • PDF/A and PDF/X-4. The result can be saved as PDF/A-1b, PDF/A-2b, PDF/A-3b (for archiving) or PDF/X-4 (for printing): File ▸ Save as in the window, --conform on the command line. The conversion is made by py-pdfconform, with Ghostscript, which must be installed; Settings ▸ py-pdfconform… says where it is. Without it, everything else works.

py-imposition needs Python 3.15 or later (the AppImage brings its own).

The RPM is signed with the key 8187 0643 CA22 1AF9 0C30 554E BE68 32CD 3599 4948, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.10-py3-none-any.whl.

py-imposition 0.9

Choose a tag to compare

@nivaca nivaca released this 17 Nov 13:25

What's new in 0.9

  • Page information on by default. impose now prints the document name, sheet number, date and time at the top left of each sheet unless --no-page-info is given; in basic mode, Page Information is ticked by default.
  • Locks for margins and trims. In basic mode, Margins and Page Trim each have a lock for Top/Bottom and another for Left/Right. While a lock is closed, changing one side changes the other too. The window remembers the locks.

py-imposition needs Python 3.15 or later (the AppImage brings its own).

The RPM is signed with the key 8187 0643 CA22 1AF9 0C30 554E BE68 32CD 3599 4948, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.9-py3-none-any.whl.

py-imposition 0.8.3

Choose a tag to compare

@nivaca nivaca released this 17 Nov 12:55

What's new in 0.8.3

  • Gutters only where they apply. A gutter only matters between two columns (the vertical one) or two rows (the horizontal one). In basic mode, the horizontal gutter is now greyed out when there is a single row of pages (a 2-up booklet, for example) and the vertical one when there is a single column, and they are left out of the command line. On the command line, impose warns when --gutter-v or --gutter-h cannot apply.

py-imposition needs Python 3.15 or later (the AppImage brings its own).

The RPM is signed with the key 8187 0643 CA22 1AF9 0C30 554E BE68 32CD 3599 4948, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.8.3-py3-none-any.whl.

py-imposition 0.8.2

Choose a tag to compare

@nivaca nivaca released this 14 Nov 17:07

Python 3.15 or later is needed (it was 3.13). The AppImage carries its own Python 3.15. The RPM is built for Fedora 45 and later, which have it; Fedora 44, whose Python is 3.14, is no longer built. The program is the same.

Se necesita Python 3.15 o posterior (antes, 3.13). La AppImage lleva su propio Python 3.15. El RPM se construye para Fedora 45 y posteriores, que lo tienen; Fedora 44, cuyo Python es 3.14, ya no se construye. El programa es el mismo.

py-imposition 0.8.1

Choose a tag to compare

@nivaca nivaca released this 14 Nov 15:34

Python 3.13 or later is needed (it was 3.12), as in the author's other programs. The program is the same.

Se necesita Python 3.13 o posterior (antes, 3.12), como en los demás programas del autor. El programa es el mismo.

py-imposition 0.8

Choose a tag to compare

@nivaca nivaca released this 12 Nov 15:08

What's new in 0.8

  • One Save. Save… (Ctrl+S, on the toolbar and next to Preview and Apply) saves what the right pane shows; if the preview isn't up to date, the command runs first. File ▸ Save the document as it is… (Ctrl+Shift+S) saves the commands applied so far, without the current one. They replace Save document and Save result.
  • After Apply, the right pane shows the applied document, instead of running the same command again on it.
  • Unsaved changes. While commands have been applied, or options changed and a result made, since the document was opened or saved, the title bar shows an asterisk, and closing the window, opening another document or reverting to the original asks whether to save first.

The RPM is signed with the key 1C16 55FF C029 6282 8A87 315E E750 A4F9 6998 9DA6, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.8-py3-none-any.whl.

py-imposition 0.7

Choose a tag to compare

@nivaca nivaca released this 12 Nov 14:33

What's new in 0.7

  • Make the content fill more of the sheet with impose and the window's basic mode:
    • Page trim (--page-trim, or --page-trim-top/-bottom/-left/-right; Page Trim in the window) cuts the white edges off every page before it is placed.
    • Enlarge (--enlarge) lets auto scale also enlarge pages that are smaller than their place on the sheet.
    • Negative margins and gutters: pages run off the sheet's edges or overlap, cut at the edge or in the middle of the overlap. On the command line, write them as --margin=-1cm.
  • Four sheets per fold by default: perfect binding in impose now folds stacks of four sheets unless --sheets-per-fold says otherwise (give --sheets-per-fold 1 for the old behaviour).

The RPM is signed with the key 1C16 55FF C029 6282 8A87 315E E750 A4F9 6998 9DA6, whose public key is attached as RPM-GPG-KEY-py-imposition.

Install the RPM from Copr (sudo dnf copr enable nivaca/py-imposition && sudo dnf install py-imposition), run the AppImage, or install the wheel with pipx install py_imposition-0.7-py3-none-any.whl.