Tinkerie 1.5.2-alpha

⚠️ Tinkerie is in alpha. Everything works, but it's still being tested on real hardware, so expect rough edges and changes. Please report anything that doesn't work.

Free maker tools by nrmluvdev: Wirie, Makie, Tunie, Flashie, Scopie, Meterie and Tracie in one program.

Which file?

• Windows 10/11: Tinkerie.exe (just run it), or Tinkerie-1.5.2-alpha-windows.zip if your connection blocks .exe downloads (it also has the source)
• Mac: …-mac-apple-silicon.zip (M1 or newer) or …-mac-intel.zip
• Linux PC: …-linux-x86_64.tar.gz
• Raspberry Pi: …-pi-64bit.tar.gz (64-bit Raspberry Pi OS) or …-pi-32bit.tar.gz

Each package has a READ ME FIRST.txt.

New in 1.5.2-alpha

• Alpha: every version number now ends in "-alpha" while Tinkerie is tested on real hardware.
• Wirie: the auto-router now draws ground (GND) tracks too, so every connection is visible on the board (the ground fill stays as extra ground). It also checks that the ground fill really reaches each pin, instead of assuming it does, and routes any pin the fill can't reach. A new Route the fill net with tracks too switch (on by default) is under Ground fill.

Earlier

• 1.5.1: every app opens maximised.
• 1.5.0: Flashie's Write image tab gained OS settings for Raspberry Pi, Windows 10/11 installer USB drives, Linux ISOs and .zst images.

Licensed under GPL-3.0-or-later.

Tinkerie 1.5.1

Free maker tools by nrmluvdev: Wirie, Makie, Tunie, Flashie, Scopie, Meterie and Tracie in one program.

Which file?

• Windows 10/11: Tinkerie.exe (just run it), or Tinkerie-1.5.1-windows.zip if your connection blocks .exe downloads (it also has the source)
• Mac: …-mac-apple-silicon.zip (M1 or newer) or …-mac-intel.zip
• Linux PC: …-linux-x86_64.tar.gz
• Raspberry Pi: …-pi-64bit.tar.gz (64-bit Raspberry Pi OS) or …-pi-32bit.tar.gz

Each package has a READ ME FIRST.txt.

New in 1.5.1

• Every app opens maximised.

New in 1.5.0 — Flashie's Write image tab

• OS settings like Raspberry Pi Imager: hostname, username and password, Wi-Fi, SSH and time zone/keyboard, set before the first start (cloud-init for Raspberry Pi OS Trixie and Ubuntu, firstrun.sh for older Raspberry Pi OS).
• Windows 10/11 installer USB drives from a Windows .iso, for UEFI PCs (FAT32, or FAT32 + exFAT when install.wim is over 4 GB).
• Linux ISOs and .zst images.

⚠️ These new Write image features haven't been tested on real hardware yet. Please report anything that doesn't work.

Licensed under GPL-3.0-or-later.