Repository navigation
v1.16
Added
- CW decoder on the web (Chrome / Edge on a computer; the Android and iOS apps don't have it yet) with DeepCW by e04 (MIT), a neural network run by onnxruntime-web in a worker. Settings → CW decoder: Download (about 14 MB once: the runtime and the narrow model; the wide model another 15 MB, from kqso.ok1cdj.com/cw/, checked by SHA-256, then offline), Turn on; Alt+U in a log.
- It listens only while a log is open in CW; in SSB / FM and in the list of logs the audio input and the worker rest.
- Input: the radio's USB sound card or a line input (picked by name), or another browser tab (WebSDR, KiwiSDR) shared with its sound.
- Models: narrow (the station at your CW pitch, light on the CPU) or wide (400–1200 Hz, optionally a filter around the pitch).
- The line under the log's header: the pitch, the input level, the decoded text (the not-yet-final end grey); calls, reports, serials and locators are framed, a tap puts the word into the input line (5NN → 599). On a phone the pitch and level give way to the text: the level moves into the tuning indicator as one bar.
- Tuning indicator: ● the signal is at your pitch, ◀ / ▶ it is below / above; a tap decodes at the signal until the log closes or the mode changes (the pitch in Settings stays).
- Manual: the CW decoder section with screenshots, Alt+U, and on Linux switching the radio's USB card to an input profile (PipeWire / PulseAudio).
Full Changelog: v1.15...v1.16