KVision 3.3.0

KVision 3.3.0

Detection reports from the recorder, with the target and the event type, plus tools to set it up and review it.

New

• Detection reports through the recorder. Cameras behind a recorder can take their reports from the recorder (one connection, with human / vehicle / animal labels, the event type and the channel number), or from each camera directly. Choose in the settings. Reports are written to the detection log under the right camera.
• Choose what shows a frame. Tick the event types (motion, line crossing, intrusion, region entrance, region exit, other) and the targets (human, vehicle, animal, other). The detection log keeps every report.
• Check detection setup (read-only). Reads each camera and recorder and says what is missing: metadata, zones, rules, the recorder's centre action, and whether a rule lives in the camera, the recorder or both.
• Event pictures. The picture sent with a line or area event is saved, shown from the detection log window, and kept per camera (100, 500 or 1000, your choice).
• Detection frame per camera in one window. Choose cameras... in the settings gives a tick box for every camera, with All on / All off.

Fixed

• Line crossings and intrusions were missed on camera streams that attach a picture.
• A stream that goes silent is reopened, with growing waits. A refused login still stops everything so a wrong password cannot lock a camera.
• The frame label no longer changes to plain motion right after a line or intrusion report.
• Setup check labels are no longer cut off.

Linux only. Restart KVision after updating. Full list: CHANGELOG.md.