Crazyflie 2.0 M4 LED is not turning on...

[gitsr-sys]

Hi,

It was very very long time ago when I used it.
I turned on CF2, but M1 and M2 are blue solid led, M1 is 2Hz red led, and M4 is not turned on.
I have ST-Link and debug adapter.. please help me to connect to CF2 using cfclient.

Thank you.

[gitsr-sys]

I did cfloader flash cf2_nrf.bin nrf51-fw, it did not work.

[enyanil]

Hi @gitsr-sys,

What the LEDs are showing sounds fully correct! The M4 LED does not turn on until you are connected to the Crazyflie. To connect to the Crazyflie with Cfclient, could you please try following these instructions.

If you also want to try flashing through the Cfclient, follow these instructions.

Let me know if you get stuck somewhere in the tutorials.