Repository navigation
Releases
PICO 4 1.0 beta 3
The third beta of the PICO 4's headset module: the install works on a headset whose bootloader was never
unlocked.
- On a locked headset the engineering bootloader refuses to start PICO OS and waits in fastboot. The Engineering
bootloader step now expects that and goes on to the unlock from there, instead of waiting for PICO OS until it
fails. A headset unlocked before still starts PICO OS on it, as before. - An engineering bootloader left in that fastboot loop by an earlier attempt counts as written: starting the
installer again goes straight on to the unlock. - A headset in fastboot with PICO's own bootloader is put into EDL mode by hand first, as Restore to stock does.
- The unlock starts in a fresh bootloader session, so its flags are saved.
Checked for this release, on a headset that was never unlocked (an owner's, PICO OS 5.13.7, from Linux): the
engineering bootloader, the unlock and the install through to the installed system. The system image is
unchanged since 1.0 beta 2. Not run on a headset yet: a headset in fastboot with PICO's own bootloader. The
acceptance check at the end of an install can fail when the controllers are not on yet.
Known issues: https://github.com/overpressure/phoenix/issues
1.0-beta.3 (2026-11-17)
Fixes
- a locked headset goes from the engineering bootloader's fastboot to the unlock
3 other commits: documentation, tests, tooling and refactoring.
PICO 4 1.0 beta 2
The second beta of the PICO 4's headset module: a safe way back after an install that stops early, and a steadier
room view.
- Restore to stock after an install that stopped before the unlock: it no longer runs fastboot without the
headset's serial, leaves PICO OS's system as it is, starts PICO OS from fastboot (also when the headset keeps
booting back into fastboot) and puts only the stock bootloader back. - Export backup works right after the backup, before the install made this computer's SSH key.
- Save logs… (overpressure 1.0 beta 2) collects the PICO 4's own logs too: the newest steps of the install and,
when the installed system runs, the headset's own bundle. The README and the bug report form point to it. - The colour room view stays steady at the edges: its lens model is fitted only over the angles the headset
shows (packages 2026.11.17).
Checked for this release, on the headset: an install stopped before the unlock, then Export backup, Save logs…
and Restore to stock from fastboot back to PICO OS; the normal Restore to stock; Save logs… with the installed
system; the room view's new fit worn, against the old one. Not run on a headset yet: the way back for a headset
that keeps booting back into fastboot (it asks for EDL mode by hand and writes the stock bootloader first).
Known issues: https://github.com/overpressure/phoenix/issues
1.0-beta.2 (2026-11-17)
Features
- the packages release 2026.11.17, whose pico4-monado keeps the colour room view steady at the edges
- the PICO 4's part of Save logs…: the dev loop's step logs and the headset's own bundle; the README and the bug form point to it
Fixes
- Restore to stock after an early stop also brings back a headset that boots back into fastboot
- Export backup works before the install made this computer's SSH key
- Restore to stock after an install that stopped early: no fastboot without a serial, and only the bootloader goes back
2 other commits: documentation, tests, tooling and refactoring.
PICO 4 1.0 beta
The first beta of the PICO 4's headset module for overpressure: Linux and a SteamOS-compatible userspace on the
original PICO 4 (2022, Snapdragon XR2), on Valve's Steam Frame kernel (overpressure/linux phoenix/7.2-4) with
Valve's Mesa and SteamVR. overpressure's installer downloads it, installs it from PICO OS, upgrades it in place
and restores PICO OS.
What it brings:
- Valve's VR session on both panels at 90 Hz (72 Hz selectable), SteamVR on the Steam Frame's compositor path.
- Head tracking with PICO OS's own tracker, the controllers (buttons, vibration, positions, battery), the colour
room view, the lens motor and IPD, the wear sensor for standby. - The Steam client and its library: Linux and Proton games through FEX, Android apps through Lepton, PC VR over
Steam Link with Venus decoding the stream. - Audio and the microphone, Wi-Fi, suspend, charger mode and PICO OS's fan policy.
- A first-run setup for language, time zone and Wi-Fi.
Checked for this release: the release checklist on the headset, a clean install from PICO OS (from Windows and
from Linux), an upgrade of the installed system, the restore to PICO OS, and Steam Link worn on kernel
phoenix/7.2-4.
Known issues: https://github.com/overpressure/phoenix/issues