Repository navigation
ownbox 1.0.0-beta.6
Pre-release
Pre-release
·
41 commits
to main
since this release
A smaller image, a box that finds its way to the near access point after a restart, and
the whole first setup in one look. Tried on the Pirate Radio over its serial console, with
the router's own log beside it.
Fixed
- After a restart the Pirate Radio joined a far access point and stayed there: the near
one (a MikroTik ax) refused it in the first minutes after boot, and the box then left it
alone until ownbox restarted. The box now looks 30 s after start, confirms a stronger
access point half a minute later, and tries one that refused it again after 10 minutes. - The setup page showed the home network as weak when the scan before the setup Wi-Fi
opened missed it at its near access point (that access point's IoT network was there at
full strength). The box now scans twice, adds what NetworkManager sees afterwards, and the
page's list fills in every 8 s.
Documentation
- README: on MikroTik ax access points, 2.4 GHz at 20 MHz as well as WPA2 only (at 40 MHz
the radio was refused after some of its restarts and ended up on a far access point).
Changed
- The first-run wizard (on the box's screen and on the phone of a box without one) in the
onboarding's look: progress bars instead of "Step 3 of 7", choices as tiles with an icon
and a line under them instead of round buttons, the network as a status card, the test
tone as a tile. On a phone the way on sits at the bottom, sign-in has a button that opens
the server's page in another tab, the code to copy and a note that the page moves on by
itself once it is approved, and naming the box offers rooms and shows the.local
address it becomes. - A smaller image to download and to write. The root file system shrinks back to what it
holds plus 256 MB (Raspberry Pi OS grows it to the whole card at the first boot), so
Imager writes about half as much; manual pages, package docs and languages other than
Czech and English are left out (and stay out through updates), as are firmware for Wi-Fi
chips no Raspberry Pi has, the compiler left from the AirPlay build, Raspberry Pi Connect
and mkvtoolnix; the image is compressed withxz -9. The build log lists the 25 biggest
packages.