Repository navigation
Releases
RainPointCrestronDriver 1.1.5
RainPointCrestronDriver 1.1.5
This patch keeps successful cloud-contact evidence current when a timer is quiet or its MQTT observer renews. Status is reconciled every 30 seconds alongside push updates. Failed reads do not refresh contact, the existing 90-second fallback limit is retained, and expired authentication still disables control.
The repair was previously exercised in the private 1.1.3 submission-validation candidate but had not reached public 1.1.4. This release brings it into the maintained source with regression tests. RainPointClient remains at 1.2.2.
Installation
Download the installable package from the GitHub release or matching NuGet distribution. Upload it, then update the existing RainPoint driver in Crestron Home Setup or Configure Pro. Uploading alone does not update the running driver. Public version 1.1.5 reports driver version 1.1.005.0000.
Existing account settings, room assignments and configuration formats are retained. Routine updates do not require removing and re-adding the driver. This patch does not change watering command behavior or initiate watering at startup.
Validation and submission status
See development history for the exact workstation, merged-package and processor results. Synthetic regression tests are distinct from physical watering acceptance. The retained earlier endurance and live evidence keeps its original version, date and scope.
The initial Crestron submission is being completed separately using this public release. This release does not claim that the submission has been signed, sent or accepted. Submission-only help PDFs and correspondence are excluded from public artifacts.
RainPointCrestronDriver 1.1.4
RainPointCrestronDriver 1.1.4
This patch corrects the dependency and lifecycle issues described below.
- Use RainPointClient 1.2.2.
- Extend the existing processor test package to run the SDK entity lifecycle and programming regressions on net472/Mono as well as the portable tests.
- No new watering behavior or configuration migration is introduced.
Installation
Use the driver package from GitHub or the matching NuGet distribution. Import the package, then update the existing driver in Home Setup or Configure Pro. Importing alone does not update the running instance. Existing pairing and configuration formats are retained; removal and re-add is not a routine update step.
Version 1.1.4 is above the private 1.1.3 submission-validation candidates; it does not claim that the suspended Crestron submission or physical watering acceptance tests have completed.
Validation
Passed 143 workstation Debug and 143 Release test executions, plus 143 native net472/Mono processor tests. Processor validation used fake transports and synthetic credentials; no new physical-device acceptance or endurance run is claimed. Existing processor configuration and all pairing files were preserved. See development history for provenance and limits.
This GitHub/NuGet release does not replace any submitted Crestron package. Submission-specific PDFs and correspondence are excluded from public artifacts.
RainPointCrestronDriver v1.1.1
RainPointCrestronDriver v1.1.1
Documentation updates. No functional changes.
See the README for installation instructions. Manifest version: 1.1.001.0019.
MIT License with Commons Clause; see LICENSE and third-party notices. RainPoint, HomGar and Crestron are trademarks of their respective owners. This independent, unofficial project is supplied AS IS without warranty.
NUnit 5 test package 1.0.0 - 1 October 2026
This is a test-tooling update attached to the existing release. Product binaries, product version and NuGet packages are unchanged.
Processor test package | Documentation | Validation receipt | Build sources | SHA-256 checksums
Uses NUnit 5.0.0. 96 offline cases passed in each of two runs from the packaged assembly on Windows. All packaged suite identities were checked against source discovery. Live/manual and processor runtime tests were not repeated for this migration; previous hardware results do not certify this package. The test package version is independent of the product version.
RainPointCrestronDriver v1.1.0
RainPointCrestronDriver v1.1.0
Adds one-zone HTV145FRF and two-zone HTV245FRF handling alongside the three-zone HTV345FRF, using RainPointClient 1.2.0. Each timer exposes only its actual zone pages, controls, plan summaries and programmable entities. Status, history and Stop all follow the same zone count.
The added models have app/protocol-reference and offline NUnit coverage. Only the owned HWG023WBRF-family hub with HTV345FRF has project hardware validation. This release does not claim physical validation of the added models or add their advanced configuration writes.
The NuGet distribution now includes the standard feed manifest and discovery metadata. Documentation includes explicit installation steps and corrected attribution wording.
Install using the Crestron Home Driver Feed Installer, or upload the attached RainPointCrestronDriver.pkg to /user/ThirdPartyDrivers/Import using SFTP. Configure RainPoint Irrigation in Crestron Home Setup and assign each discovered timer to its room. For an existing installation, apply the driver update after importing. Manifest version: 1.1.000.0018.
See the README and test guide. Offline validation covers 96 portable cases on each target, 47 SDK cases and five merged-package cases. No new hardware watering or deployment was performed for this release.
MIT License with Commons Clause; see LICENSE and third-party notices. RainPoint, HomGar and Crestron are trademarks of their respective owners. This independent, unofficial project is supplied AS IS without warranty.
RainPointCrestronDriver v1.0.0
RainPointCrestronDriver v1.0.0
Initial release of the RainPoint Home / Smart+ irrigation extension for Crestron Home. Each supported HTV345FRF three-zone timer has its own room-page tile.
Features
- Independent timed watering and stop controls for all three zones, plus Stop all for the timer.
- Live reported activity, remaining phase time, alarms, battery condition and dated water usage.
- App-assigned hub and zone names, saved-plan summaries and automatic configuration updates.
- 26 programming properties, 10 commands and 18 events for Crestron Home automation.
Scheduling and device pairing remain in the RainPoint app. Use a dedicated account invited to the home to avoid displacing the owner's app login. This release uses the published RainPointClient 1.1.0 package and requires cloud access.
Install
Use the attached RainPointCrestronDriver.pkg, or extract it from NuGet package CrestronHomeDriver.RainPoint.Irrigation version 1.0.0. The manifest version is 1.0.000.0017. Configure the RainPoint Irrigation platform and assign its timer extension to a room. See the README for configuration, supported hardware and operating limits.
Validation
The driver suite covers 91 portable cases on each of net472 and net10.0, 44 desktop SDK cases and two merged-package cases. The separate client suite passed 1,380 processor cases. Installed Home testing verified programming metadata and a one-minute zone-1 automation run, including decreasing countdown, natural completion, the stopped event and dated usage. App rename and disabled-plan creation/deletion changes reached the driver automatically. Temporary programming and the test plan were removed.
Live evidence is from the currently paired hub and three-zone timer. All-zone command paths have offline coverage; the automated watering run used zone 1. Device-reported usage was verified without independent physical volume measurement. See the test guide for dependencies and evidence boundaries.
License and notices
MIT License with Commons Clause; see the attached LICENSE and third-party notices. RainPoint, HomGar and Crestron are trademarks of their respective owners. This is an independent, unofficial project, supplied AS IS without warranty.