Skip to content

Releases

v0.8.1

Choose a tag to compare

@github-actions github-actions released this 02 Nov 16:47

PocketDesk v0.8.1

0.8.1 fixes

  • Typing in any field no longer hides the tabs behind the keyboard: the bottom
    navigation steps out of the way while the IME is up and returns when it
    closes.
  • Screenshots work while the pairing-code field is focused. The field no longer
    uses a password-style input type, which some Android skins treat as sensitive
    and block screen capture for.
  • CI now runs the Windows host on the Windows runner: a real SendInput
    self-test (pointer, wheel, keyboard, typed text) plus a server smoke test that
    checks the index page reports input enabled. Windows key mapping has unit
    tests.

New interface — Material You, rebuilt from the connect screen to the session
controls: Home / Devices / Settings tabs, a discovery-first Home with found
computers as cards, bottom sheets for quality, input, audio, keys and screen size,
and a floating session pill that fades away and comes back with a tap. Colours
follow the wallpaper on Android 12+ and use the built-in dark palette below that.

Windows host — see below: remote input now works on Windows.

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Keyboard combos — the toolbar's Super/Ctrl/Alt/Shift chips now apply to
the phone's own keyboard too: tap Super, type s, and the host gets Super+S.
The chips stay latched until you tap them off.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows — pocketdesk-windows-x86_64.exe drives the desktop too: pointer, clicks,
wheel and keyboard go through SendInput, with the same direct-touch and touchpad
modes. Install ffmpeg (winget install ffmpeg), run it, and allow the firewall
prompt. Second screen and phone audio are Linux-only and stay that way for now.

macOS — screen capture through avfoundation; input is still to come.

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.8.0...v0.8.1

v0.8.0

Choose a tag to compare

@github-actions github-actions released this 31 Oct 12:51

PocketDesk v0.8.0

New interface — Material You, rebuilt from the connect screen to the session
controls: Home / Devices / Settings tabs, a discovery-first Home with found
computers as cards, bottom sheets for quality, input, audio, keys and screen size,
and a floating session pill that fades away and comes back with a tap. Colours
follow the wallpaper on Android 12+ and use the built-in dark palette below that.

Windows host — see below: remote input now works on Windows.

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Keyboard combos — the toolbar's Super/Ctrl/Alt/Shift chips now apply to
the phone's own keyboard too: tap Super, type s, and the host gets Super+S.
The chips stay latched until you tap them off.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows — pocketdesk-windows-x86_64.exe drives the desktop too: pointer, clicks,
wheel and keyboard go through SendInput, with the same direct-touch and touchpad
modes. Install ffmpeg (winget install ffmpeg), run it, and allow the firewall
prompt. Second screen and phone audio are Linux-only and stay that way for now.

macOS — screen capture through avfoundation; input is still to come.

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.7.0...v0.8.0

v0.7.0

Choose a tag to compare

@github-actions github-actions released this 29 Oct 15:12

PocketDesk v0.7.0

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Keyboard combos — the toolbar's Super/Ctrl/Alt/Shift chips now apply to
the phone's own keyboard too: tap Super, type s, and the host gets Super+S.
The chips stay latched until you tap them off.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.6.3...v0.7.0

v0.6.3

Choose a tag to compare

@github-actions github-actions released this 29 Oct 14:47

PocketDesk v0.6.3

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Keyboard combos — the toolbar's Super/Ctrl/Alt/Shift chips now apply to
the phone's own keyboard too: tap Super, type s, and the host gets Super+S.
The chips stay latched until you tap them off.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.6.2...v0.6.3

v0.6.2

Choose a tag to compare

@github-actions github-actions released this 29 Oct 07:31

PocketDesk v0.6.2

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Keyboard combos — the toolbar's Super/Ctrl/Alt/Shift chips now apply to
the phone's own keyboard too: tap Super, type s, and the host gets Super+S.
The chips stay latched until you tap them off.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.6.1...v0.6.2

v0.6.1

Choose a tag to compare

@github-actions github-actions released this 29 Oct 07:11

PocketDesk v0.6.1

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Keyboard combos — the toolbar's Super/Ctrl/Alt/Shift chips now apply to
the phone's own keyboard too: tap Super, type s, and the host gets Super+S.
The chips stay latched until you tap them off.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.6.0...v0.6.1

v0.6.0

Choose a tag to compare

@github-actions github-actions released this 29 Oct 06:54

PocketDesk v0.6.0

USB or Wi-Fi — tick "USB cable (fast)" on the connect screen. The host
sets up adb reverse, so the app talks to the host over USB at 30 fps/q90,
with a 2400 px second screen. Wi-Fi stays one tap away and keeps its own
saved address.

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four Wi-Fi presets plus a Cable
preset (30 fps/q90). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600 px on Wi-Fi, 2400 px on USB), so it
extends the desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.5.5...v0.6.0

v0.5.5

Choose a tag to compare

@github-actions github-actions released this 29 Oct 06:25

PocketDesk v0.5.5

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four presets (Low data 10 fps/q45,
Balanced, Sharp, Smooth 30 fps). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600x720 for a 20:9 display), so it extends the
desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.5.4...v0.5.5

v0.5.4

Choose a tag to compare

@github-actions github-actions released this 29 Oct 03:29

PocketDesk v0.5.4

No IP typing — the host advertises itself on UDP 8766 and the app lists
found machines under "Found on this network". Tap one to fill in the address;
a saved machine connects immediately. QR and manual entry still work.

Input modes — choose direct touch (tap where you look) or a real
touchpad: drag to move, tap to click, hold to drag, two fingers to scroll,
two-finger tap for right click, three-finger tap for middle click. Tap to
click, and pointer speed are configurable. Natural or traditional scrolling
is its own session-menu toggle and applies to both input modes.

Audio to the phone — ⋯ → Audio output streams this machine's sound to the
phone (PCM 48 kHz stereo) over a separate socket, so it keeps playing in the
background. The host's own speakers can be muted while the phone listens, and
are always restored when the session ends.

Screen size — fit (black bars), fill (crop the sides) or stretch (fill the
display exactly, may distort) for mismatched aspect ratios.

Stop really stops — the foreground notification is now removed when the
session ends.

Updates — installs from v0.4.0 onward share the permanent signing key and
update inside the app:
⋯ → Check for updates (also checked on launch) downloads, verifies the
SHA-256 and signing certificate, and opens the installer.

Faster — unchanged frames are no longer sent (~0.4 Mbit/s idle instead of
~17), the stream pauses entirely while the app is in the background, decoded
bitmaps are reused, and quality steps down automatically if the phone falls
behind.

Pairing — run the host; the app finds it on the LAN, or scan the QR code it
prints, or type the 8-character code (K7M4-QX2B). Tick Remember this device
for one-tap reconnects, or leave it unticked for a one-time login.

Background — the session keeps running when the app is swiped out of recents.
The notification shows the live fps and its Stop action asks for confirmation.

Quality — the toolbar's ⋯ menu has four presets (Low data 10 fps/q45,
Balanced, Sharp, Smooth 30 fps). The host reconfigures live and confirms what it applied.

Keys & full screen — choose which modifiers, navigation keys and F-keys appear in the
toolbar; hide it entirely for a full-screen view and bring it back with the ☰ tab.

Second screen — ⋯ → Use phone as a second screen asks the host for a Hyprland
headless monitor sized to your phone (1600x720 for a 20:9 display), so it extends the
desktop instead of mirroring it. Removed automatically when you disconnect.

Android — pocketdesk.apk (sideload it). pocketdesk-debug.apk is the same app with the debug key.

Linux — pocketdesk-linux-x86_64.tar.gz, unpack and run ./pocketdesk.
First run prints a pairing code and QR; sudo ./setup-linux-input.sh enables remote mouse/keyboard.
./pocketdesk --extend 1600x900 starts in second-screen mode.

Windows / macOS — binaries are built and stream screens through ffmpeg, but remote input is
not implemented yet. Treat them as previews (see the roadmap).

Verify downloads with SHA256SUMS.txt.

Full Changelog: v0.5.3...v0.5.4

v0.5.3

Choose a tag to compare

@github-actions github-actions released this 29 Oct 03:19

PocketDesk 0.5.3

No IP typing — the app now finds your computer on the LAN. The host
advertises itself on UDP 8766 and answers probes; found machines appear under
FOUND ON THIS NETWORK. Tap one to fill in the address (a saved machine
connects immediately). The pairing code is never broadcast, and QR/manual entry
still work.

Screen size: fit / fill / stretch — ⋯ → Screen size now offers letterbox,
crop-the-sides, or stretch-to-the-display for mismatched aspect ratios. Touch
mapping works in all three.

Natural or traditional scrolling — now a session-menu toggle, saved, and
applied to both direct touch and touchpad gestures.

Touchpad input mode — direct touch or a real trackpad: drag to move, tap to
click, hold to drag, two fingers scroll, two-finger tap right-clicks,
three-finger tap middle-clicks. Tap-to-click, natural scrolling and pointer
speed are configurable.

Audio output — ⋯ → Audio output plays this machine's sound on the phone
(PCM 48 kHz stereo) and can mute the host's speakers while the phone listens.
Switching back to the machine now restores its speakers immediately.

Stop really stops — the foreground notification is removed when the session
ends.

Updates — the app checks GitHub on launch and from ⋯ → Check for updates,
verifies the SHA-256 and signing certificate, and opens the installer.

Background — the session keeps running when the app is swiped out of recents;
the notification's Stop action asks first.

Second screen — ask the host for a Hyprland headless monitor sized to the
phone; it disappears when you disconnect.

If you are upgrading from 0.4.1 or older, that build used a throwaway signing
key: uninstall it once, install this APK by hand, and later versions update
inside the app.