Repository navigation
Analog Shield Library v0.1.1
Analog Shield Library v0.1.1
Fixes temperature and voltage readings on the Phyduino Pico, and adds a plotter example.
Install: download AnalogShield-0.1.1.zip from this release, then in the Arduino IDE use
Sketch → Include Library → Add .ZIP Library…
Documentation: https://perc-sw.github.io/analog_shield_lib/
Upgrading
Phyduino Pico builds now need the board package phyduino_bsp v0.1.0-rc.2 or later, which
provides analogFullScaleMillivolts(). With v0.1.0-alpha.1 every sketch fails to compile.
Fixed
- EXT temperatures:
TempCelsius(),TempFahrenheit()andTempKelvin()on
TempSource::EXTleft out the R15 / 10K divider, so readings came out far too hot. EXT now
undoes the same signal path as MCU and reads the sensor's full -50 to 150 °C range. - Full scale on the Phyduino Pico: millivolt and temperature readings now use each pin's own
full scale: 3.3 V on A0-A2 (RP2040 ADC) and 2.048 V on A3-A5 (MAX11635).
TempMillivolts(TempSource::EXT)andPotMillivolts()were 1.61 times too high. Other boards
still assume 3.3 V. - SerialPlotter documentation: the last value is
Channel(0 for A0, 3 for A3), notSwitch.
Added
| Example | Shows |
|---|---|
plotter |
Port of the MicroPython plotter example: raw and conditioned temperatures, encoder clicks, selected channel, potentiometer and VBUS in the Serial Plotter. The switch selects A0 or A3, shown on D1/D2, and both LEDs light if the MAX11635 stops responding. Phyduino Pico only. |
Full list of changes: CHANGELOG.md