Skip to content

v1.0.8

Choose a tag to compare

@phurth phurth released this 24 Aug 15:23
· 1 commit to main since this release

Fixed: HVAC "Auto" did nothing

Setting the thermostat to Auto from Home Assistant put it into an Auto mode that accepted the setpoints but never actually called for heat or cool. Using Auto Furnace on the thermostat's own screen worked.

Cause: HA's auto was hardcoded to device mode 8 (plain Auto), which has no heat source bound to it. Furnace units do not even advertise mode 8 in their capability mask (MAV), yet they still acknowledge a change to it and then run nothing. The modes that work are the per-heat-source variants the thermostat screen shows as Auto Furnace (11), Auto Heat Pump (10) and Auto Heat Strip (9).

Fix: Auto is now resolved against the device's MAV capability mask, the same way heat already was:

  • HA auto selects the Auto variant your thermostat actually advertises, preferring the one driven by the zone's current heat source. Plain mode 8 is used only when it is all the device offers.
  • The heat source carries across a heat ⇄ auto switch, so going from Furnace heat to Auto lands on Auto Furnace.
  • Heat-source presets now work in Auto, letting you switch between Auto Furnace / Auto Heat Pump / Auto Heat Strip on units with more than one heat source. The preset displayed while in Auto is now correct — it previously showed a meaningless first-in-list value.

Verified on a unit reporting MAV=0x816 (fan-only, cool, furnace, auto furnace): HA auto writes {"zone":0,"power":1,"mode":11} and the thermostat echoes back mode 11 — identical to pressing Auto Furnace on the device.

Also fixes the README debug-logging snippet, which named the pre-rename custom_components.easytouch logger and therefore captured nothing.