Skip to content

v1.22.0

Choose a tag to compare

View all tags
@github-actions github-actions released this 11 Nov 11:30
· 1 commit to main since this release
v1.22.0
2659707

v1.22.0 — 负载延迟探测 + 过热保护

亮点

负载延迟探测（缓冲膨胀，诚实边界版）

总览页新增「缓冲膨胀」卡：一键测"空闲延迟 vs 负载下延迟"，8 流 CDN 下载产生真实下行负载，同窗 ping 采样，差值 + 负载规模（load_mbps）一起落盘。

  • 负载不足（<50Mbps）时判 weak 并明示"结果仅供参考"——直接来自实测教训：负载没拉起时 0ms 差值是假阴性
  • 判定分级：稳定(<10ms) / 轻度(<30) / 中度(<100) / 重度(≥100)
  • 诚实边界：CDN 单流被恒限 ~24Mbps，本机 8 流负载上限 ~200Mbps——千兆线路上本探测验证的是整形健康度与容量下界，不是满载 bufferbloat（满载需 flent 式外部负载源）。README 与脚本头均如实写明

过热保护（thermal guard）

netsteer-check（每分钟 cron）采样最热温区：

  • 数值落 /tmp/netsteer/health.json（内存盘，每分钟写不伤 flash；跨阈值事件才写 uci/log）
  • ≥85°C：日志告警，10 分钟防刷屏
  • ≥95°C：自动降档 steering（过热保护优先于吞吐），事故日志落 /etc/netsteer/incidents/thermal-*.log；温度回落不自动升档（宁漏勿误），UI 提示手动恢复
  • 总览页新增「设备温度」卡：正常绿 / 偏热(≥85°C)无色 / 过热(≥95°C)红

其他

  • netsteer-audit 新增 health（温度）、mtu_fix（MSS 钳制检出）、bloat（探测结果透传）字段
  • rpcd ACL 白名单新增 netsteer-bloat
  • 修复：for z in firewall.@zone[*] 被 shell glob 吞掉导致 mtu_fix 恒 0（改 uci show 解析）

真机验证（R5C aarch64）

  • 正常态：8 流负载 159Mbps，idle 5ms → loaded 6ms，bloat 1ms = ok（cake 整形工作正确的判定）
  • SQM 关闭态：116Mbps 负载无整形，无排队 → ok（不满载不误报，宁漏勿误）
  • 温度监测：health.json 实时更新（46°C），UI 温度格渲染正确
  • 单测 431 全绿（含 bloatMeta/tempMeta 18 项新断言）/ e2e 18 项全绿 / doctor VERDICT OK

Full Changelog: v1.21.0...v1.22.0

v1.22.0 — Loaded-latency probe + thermal guard

Highlights

Loaded-latency probe (bufferbloat, honest-boundary edition)

New "Bufferbloat" card on the dashboard: one tap measures idle latency vs loaded latency. An 8-stream CDN download generates real downstream load, ping samples the same window, and both the delta and the measured load (load_mbps) are persisted.

  • When load fails to ramp (<50 Mbps) the verdict is weak with an explicit "reference only" note — a direct lesson from field testing: a 0 ms delta with no load is a false negative
  • Verdict tiers: stable(<10ms) / light(<30) / mid(<100) / severe(≥100)
  • Honest boundary: CDNs rate-limit each stream to ~24 Mbps; on-device 8-stream load tops out around 200 Mbps — on gigabit links this validates shaping health and a capacity lower bound, not full-saturation bufferbloat (which needs flent-style external load). Stated plainly in both READMEs and the script header.

Thermal guard

netsteer-check (per-minute cron) samples the hottest thermal zone:

  • Values go to /tmp/netsteer/health.json (tmpfs — per-minute writes never touch flash; uci/log writes only on threshold crossings)
  • ≥85°C: logged warning with 10-minute anti-spam
  • ≥95°C: auto-downgrade to the steering profile (thermal protection beats throughput), incident log at /etc/netsteer/incidents/thermal-*.log; no auto-restore on cooldown (better-silent-than-wrong) — the UI tells you when to re-enable
  • New "Device temperature" card on the dashboard: green normal / plain ≥85°C / red ≥95°C

Other

  • netsteer-audit gains health (temperature), mtu_fix (MSS-clamp detection), bloat (probe passthrough)
  • rpcd ACL whitelist adds netsteer-bloat
  • Fixed: for z in firewall.@zone[*] swallowed by shell globbing made mtu_fix always 0 (now parsed via uci show)

Device verification (R5C aarch64)

  • Normal: 8-stream load at 159 Mbps, idle 5 ms → loaded 6 ms, bloat 1 ms = ok (correct reading for healthy cake shaping)
  • SQM off: 116 Mbps load unshaped, no queueing → ok (no false alarm on an unloaded link)
  • Thermal: health.json live updates (46°C), UI card renders correctly
  • 431 unit tests green (18 new bloatMeta/tempMeta assertions) / 18 e2e checks green / doctor VERDICT OK

Full Changelog: v1.21.0...v1.22.0

Download the .apk matching your device architecture (check /etc/apk/arch on the router).

Install (OpenWrt 24.10+/25.12):

apk add --allow-untrusted /tmp/luci-app-netsteer-*.apk

Built automatically by CI from this tag — unit tests + 4-arch build matrix.
Every package is verified with apk verify before it is attached.

Assets 6
Loading