Skip to content

Releases

DX Cluster Client 0.3.2

Choose a tag to compare

@github-actions github-actions released this 17 Nov 12:53

English

Added

  • Alarm: callsigns and masks are uppercased while typing; country names keep their normal case.
  • Alarm: the watch list can be sorted by rule name with the Sort by name button or by clicking the
    Pattern header; the order is saved.
  • Alarm: duplicate rules are rejected with a warning (same kind and pattern, case-insensitive);
    editing a rule is not a duplicate of itself.

Fixed

  • History spots from sh/dx are kept but never treated as fresh until the PC clock is calibrated:
    they no longer raise Alarm, are not forwarded to loggers, and are not removed by age.
  • Damaged clusters.json and settings.json no longer prevent the application from starting;
    wrong-typed settings fall back to defaults and bad list items are dropped.
  • settings.json is written atomically with owner-only permissions (0600); cty.dat updates are
    atomic too.
  • Filtering and searching work on PySide6 6.6–6.8 (compatibility with Qt versions without
    beginFilterChange).
  • The spot table uses a callsign index for exact and duplicate lookups, removes rows in contiguous
    ranges, and clamps the maximum number of rows.
  • Fixed the test-suite teardown crash on PySide6 6.12.

Русский

Добавлено

  • Alarm: позывные и маски автоматически вводятся заглавными; названия стран сохраняют регистр.
  • Alarm: список правил сортируется по имени кнопкой «Сортировать по имени» или кликом по заголовку
    «Позывной / маска»; порядок сохраняется.
  • Alarm: одинаковое правило нельзя добавить дважды — выводится предупреждение (совпадение по типу
    и шаблону без учёта регистра); редактируемое правило не считается дублем самого себя.

Исправлено

  • Исторические споты из sh/dx сохраняются, но до калибровки часов ПК не считаются свежими:
    не вызывают Alarm, не пересылаются в логгеры и не удаляются по возрасту.
  • Повреждённые clusters.json и settings.json больше не мешают запуску; значения неверного типа
    заменяются значениями по умолчанию, а неподходящие элементы списков отбрасываются.
  • settings.json записывается атомарно с правами только для владельца (0600); обновление
    cty.dat тоже атомарное.
  • Фильтрация и поиск работают на PySide6 6.6–6.8 (совместимость с версиями Qt без
    beginFilterChange).
  • Таблица спотов использует индекс по позывному для точных и дублирующих проверок, удаляет строки
    непрерывными диапазонами и ограничивает максимальное число строк.
  • Исправлено падение тестов при завершении на PySide6 6.12.

Downloads / Файлы

Full changelog / Полный список изменений: CHANGELOG.md · CHANGELOG.ru.md

DX Cluster Client 0.3.1

Choose a tag to compare

@github-actions github-actions released this 17 Nov 04:23

English

Added

  • Clock correction: spot ages are computed with the cluster time (median offset of live spots);
    the status bar warns when the PC clock differs by more than 5 minutes.
  • Connection watchdog: the client reconnects after 15 minutes without data.
  • Alarm matches older than 24 hours are removed automatically (configurable); a Clear button on the
    Spots tab and View → Clear all spots and Alarm matches (Ctrl+L).

Changed

  • The daily update check and the cty.dat freshness check are re-evaluated hourly during long
    sessions.
  • Line decoding works at the byte level: UTF-8 characters and telnet commands split across TCP
    packets are handled, with a cp1251 fallback.
  • The telnet server prompt uses a locale-independent date.

Fixed

  • Identical spots (for example, sh/dx repeated after a reconnect) are ignored.
  • A damaged settings.json is kept as a backup and reported instead of being silently overwritten.
  • The Alarm notification history is pruned so it does not grow without bound.

Русский

Добавлено

  • Поправка часов: возраст спотов считается по времени кластера (медианное смещение живых спотов);
    в статусной строке появляется предупреждение, если часы ПК расходятся больше чем на 5 минут.
  • Сторожевой таймер соединения: переподключение после 15 минут без данных.
  • Совпадения Alarm старше 24 часов удаляются автоматически (срок настраивается); кнопка «Очистить»
    на вкладке «Споты» и «Вид → Очистить все споты и совпадения Alarm» (Ctrl+L).

Изменено

  • Проверка обновлений и свежести cty.dat перепроверяется раз в час при долгой работе.
  • Декодирование строк работает на уровне байтов: символы UTF-8 и telnet-команды, разделённые
    между TCP-пакетами, обрабатываются корректно; есть запасной вариант cp1251.
  • Приглашение telnet-сервера использует дату, не зависящую от локали.

Исправлено

  • Одинаковые споты (например, повторный sh/dx после переподключения) игнорируются.
  • Повреждённый settings.json сохраняется как резервная копия и показывается в сообщении,
    а не перезаписывается молча.
  • История уведомлений Alarm очищается, чтобы не расти бесконечно.

Downloads / Файлы

Full changelog / Полный список изменений: CHANGELOG.md · CHANGELOG.ru.md

DX Cluster Client 0.3.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 14:31

English

Added

  • Solar indices (SFI, A, K and sunspot number) in the toolbar, refreshed hourly from hamqsl.com with
    NOAA SWPC as a fallback.
  • Azimuth and distance columns based on the QTH locator from Settings.
  • Search by callsign or country above the spot table.
  • Send spot… dialog, also available from a spot's context menu.
  • Error log dxclient.log and a dialog for uncaught exceptions.
  • Daily GitHub update check and automatic cty.dat update when it is older than 30 days.
  • Tabbed Settings dialog.

Changed

  • The mode column, filter buttons and Alarm list show PH instead of SSB/AM/FM.
  • Old spots (for example, from sh/dx after login) are shown but do not trigger Alarm and are not
    forwarded to loggers; spots older than the configured age are removed and greyed out from half
    that age.
  • Repeated spots of a station on the same band and mode are merged into one row with a counter.
  • Tests for the new logic.

Русский

Добавлено

  • Солнечные индексы (SFI, A, K и число пятен) на панели инструментов; обновляются раз в час
    с hamqsl.com, запасной источник — NOAA SWPC.
  • Колонки азимута и расстояния по QTH-локатору из настроек.
  • Поиск по позывному или стране над таблицей спотов.
  • Диалог «Дать спот…», в том числе из контекстного меню спота.
  • Журнал ошибок dxclient.log и окно для непойманных исключений.
  • Ежедневная проверка обновлений на GitHub и автообновление cty.dat, если он старше 30 дней.
  • Настройки на вкладках.

Изменено

  • В колонке вида, кнопках фильтров и списке Alarm показывается PH вместо SSB/AM/FM.
  • Старые споты (например, из sh/dx после входа) показываются, но не вызывают Alarm и не
    пересылаются в логгеры; споты старше заданного срока удаляются, а с половины срока показываются
    серым.
  • Повторные споты станции на том же диапазоне и виде объединяются в одну строку со счётчиком.
  • Тесты для новой логики.

Downloads / Файлы

Full changelog / Полный список изменений: CHANGELOG.md · CHANGELOG.ru.md

DX Cluster Client 0.2.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 09:44

English

Added

  • Built-in telnet server for logging programs (N1MM, Log4OM, …) on 127.0.0.1:7300; the port and LAN
    access are configurable.
  • The server re-publishes only the spots that pass the current filters.
  • Minimal cluster dialogue: callsign prompt at login:, sh/dx [n] for filtered history, bye to
    disconnect.
  • Status bar shows the server address and client count, or a busy-port error.

Changed

  • Original DX de lines are forwarded unchanged; sh/dx lines are reformatted.
  • Tests for line formatting and the server; English and Russian READMEs updated.

Русский

Добавлено

  • Встроенный telnet-сервер для логгеров (N1MM, Log4OM, …) на 127.0.0.1:7300; порт и доступ
    из локальной сети настраиваются.
  • Сервер пересылает только споты, прошедшие текущие фильтры.
  • Минимальный диалог кластера: приглашение позывного на login:, sh/dx [n] для отфильтрованной
    истории, bye для отключения.
  • В статусной строке показывается адрес сервера и число клиентов или ошибка занятого порта.

Изменено

  • Исходные строки DX de пересылаются без изменений; строки sh/dx переформатируются.
  • Тесты форматирования строк и сервера; обновлены README на английском и русском.

Downloads / Файлы

Full changelog / Полный список изменений: CHANGELOG.md · CHANGELOG.ru.md

DX Cluster Client 0.1.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 07:58

English

Added

  • First public release.
  • Telnet DX cluster client with the default cluster RA3CO-2 (ra3co.com:7373), automatic login and
    reconnect.
  • Filters by band, mode, DX and spotter continent, and country; saved filter presets.
  • Alarm watch list of callsigns, masks or countries, with sound and desktop notifications.
  • Cluster list from clusters.ra3co.com plus custom nodes.
  • English and Russian interface.
  • Linux AppImage and Windows single-file builds; MIT license.

Русский

Добавлено

  • Первый публичный релиз.
  • Клиент telnet DX-кластера с кластером по умолчанию RA3CO-2 (ra3co.com:7373), автовходом
    и переподключением.
  • Фильтры по диапазону, виду, континенту DX и спотера, стране; сохраняемые наборы фильтров.
  • Alarm: список позывных, масок или стран со звуком и системными уведомлениями.
  • Список кластеров с clusters.ra3co.com и свои узлы.
  • Интерфейс на русском и английском.
  • Сборки AppImage для Linux и один exe для Windows; лицензия MIT.

Downloads / Файлы

Full changelog / Полный список изменений: CHANGELOG.md · CHANGELOG.ru.md