Repository navigation
Releases
Releases · radimklaska/owie
CI build for PR #15
v1.6.0-rc1 (release candidate, untested)
Warning
Release candidate, not tested on a board yet. This build passes the unit tests and the CI firmware build, but nobody has ridden it. For a proven build stay on v1.5.1.
Reports are welcome, good or bad. Please open an issue and include your board (XR 4206-4210 or Pint), the BMS firmware version from the Battery page, and what you saw.
What's new in 1.6.0
- Battery page: new BMS section. Shows the BMS firmware version, hardware variant, last shutdown reason, protection thresholds, balancing cells, and cycle count and state of health on boards that report them (XR 4210 and Pint). (#8)
- Fuel gauge survives power-off. Owie recognises the BMS shutdown warning and the shutdown codes the BMS sends before it powers off, and saves the fuel gauge state when that happens. (#7)
- Temperatures fixed. BMS temperatures are read as unsigned, an out-of-range sensor shows as "n/a", and the average uses only the pack sensors. (#6)
- Status byte follows Owie's SOC. The coarse charge level in the forwarded status message now matches the percentage Owie reports. (#9)
- Docs. BMS protocol notes in the README, and a link to the flashing tool for first-time installs. (#5, #13)
Worth checking if you try it
- After switching the board off with the button, the fuel gauge state is still right on the next power-up.
- Charging starts and finishes normally.
- The values in the BMS section of the Battery page look plausible for your board.
Commits
- b32bd02: Recognise BMS shutdown signals and persist fuel gauge state on power-off (Radim Klaska) #7
- 9b753af: Treat BMS temperatures as unsigned, flag 0xFF, average pack sensors only (Radim Klaska) #6
- 3147224: Rewrite the SOC bucket in the forwarded status byte to match the overridden SOC (Radim Klaska) #9
- 8f4c8c5: Document the BMS protocol as reverse engineered; refresh code comments (Radim Klaska) #5
- dd306a0: Show BMS firmware version, variant, last shutdown reason, thresholds, cycles and health (Radim Klaska) #8
- give the 0x09 fault codes in the firmware's numbering; do not claim a rate for 0x0F-0x11 #5 (Radim Klaska)
- 5f917c6: Clarify what 0xFF means for a BMS temperature: above clamp, not an open sensor (Radim Klaska) #6
- fbfed2a: Do not assert how long the 5V rail survives after the BMS fault code (Radim Klaska) #7
- 9f6a42c: Merge branch 'main' into docs/bms-protocol-notes (Radim Klaska) #5
- e15099c: Merge branch 'main' into fix/temperature-parsing (Radim Klaska) #6
- 1048ce4: Merge branch 'main' into feat/bms-shutdown-signals (Radim Klaska) #7
- bc845f3: Merge branch 'main' into feat/bms-info-page (Radim Klaska) #8
- aa80a0b: Merge branch 'main' into feat/status-soc-bucket (Radim Klaska) #9
- link the first-time flashing steps to klaska.net/owie-flashingtool #13 (Radim Klaska)
- 8d2e53e: Merge remote-tracking branch 'origin/main' into feat/bms-info-page (Radim Klaska) #8
- 4bfba21: Merge remote-tracking branch 'origin/main' into feat/status-soc-bucket (Radim Klaska) #9
- 92d8a32: Release v1.6.0-rc1: pre-release support and version bump (Radim Klaska) #14
v1.5.1
Commits
- comment the test result and a firmware artifact link on pull requests #10 (Radim Klaska)
- 7ce92d6: CI report: name the workflow in the comment footer (Radim Klaska) #10
- 9f3bf56: CI report: link firmware.bin directly via a per-PR pre-release (Radim Klaska) #10
- acdcd08: CI report: publish from a separate job, keep the build job read-only (Radim Klaska) #10
- d0fc77b: CI report: post a new comment for every run instead of editing one in place (Radim Klaska) #10
- serialise runs per pull request so firmware pre-release publishing cannot race #10 (Radim Klaska)
- cb9b4cd: CI report: name the direct-download asset firmware_.bin (Radim Klaska) #10
- name the firmware asset after the tag (firmware_.bin) #11 (Radim Klaska)
- ab1cbf0: Bump owie_version to 1.5.1 for v1.5.1 release (Radim Klaska) #12
v1.5.0
Commits
- 617f7be: Update README.md (lolwheel)
- afd2fbe: Delete ota_screen.png (lolwheel)
- c63bfbd: fix saving wifi settings when hitting back button (lolwheel#59) (lolwheel#63) (mretich) #63
- e5ffe83: Reformat sources and bump a library version. (lolwheel)
- 7ae42f4: Update libraries and refactor current tracking into a separate class. (lolwheel)
- 8f10e08: Deferify packet tracker. (lolwheel)
- 3e09126: First bits of coulomb counting. Nothing's hooked up yet. (lolwheel)
- 1ccfcb0: OTA upload script fix and battery.html skeleton. (lolwheel)
- ce17b47: Ah counting, bugs fixed and some bits already tested. (lolwheel)
- b6a4936: Ah tracking works sans settings saving. (lolwheel)
- 5dbf60d: Remove shutdown logic, it didn't work. (lolwheel)
- 37dfd37: Non volatile storage WIP (lolwheel)
- 44473d5: README review (lolwheel#73) (Jared Harrison) #73
- ced0457: Report received and overridden BMS serial number in UI. (Radim Klaska)
- 8e9af89: Update GitHub Actions. (Radim Klaska)
- 8982b28: Debug test_battery_fuel_gauge tests. (Radim Klaska) #3
- 5685974: Merge PR lolwheel#82: Report received and overridden BMS serial number in UI (Radim Klaska)
- bc4eebc: Merge PR lolwheel#83: Update GitHub Actions (Radim Klaska)
- 506aadf: Guard onHighestDischarge against unset voltage_based_soc_ (Radim Klaska) #3
- f586a08: "Claude PR Assistant workflow" (Radim Klaška) #2
- fe9b9c5: "Claude Code Review workflow" (Radim Klaška) #2
- 1563bc9: Merge PR #3: Fix test_battery_fuel_gauge tests (Radim Klaška) #3
- 7323384: Bump owie_version to 1.5.0 for v1.5.0 release (Radim Klaska) #4
- 578488a: Merge PR #4: Bump owie_version to 1.5.0 (Radim Klaška) #4