Repository navigation
Releases
localflow 0.6.1
What's new in 0.6.1
- Pastes into Ghostex and Ghostty again (Linux). On Hyprland, X11 programs under XWayland (Ghostex) got the paste keys as other keys; they now get them from
xdotool(install it alongsidewtype). Terminals paste with Ctrl+Shift+V: Shift+Insert pasted the primary selection in a stock Ghostty, kitty, Alacritty or foot. - Onboarding recommends Claude Haiku 5.5 with your Anthropic API key: more accurate than the local model. Paste your key and test it right in the onboarding; localflow's own model still downloads and cleans up when Claude can't be reached.
- Cleanup you can trust more: a "not" the cleanup drops is caught ("do not merge this" never becomes "Merge this."); "yes" and "ok" on their own are pasted; numbers written as digits (120, 2.5, 2026, 404, 9:30) and the fixes your words list asks for are kept instead of falling back to the transcript as heard.
- Visualize: flowcharts and mind maps are no longer cut short; "left to right" draws left to right.
- Command line:
localflow --checkandlocalflow modelsshow Claude Haiku when it cleans up; clearer messages; no crash when output goes to a closed pipe.
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), what cleans up (Claude Haiku 5.5 with your API key, recommended, or localflow's own model, localflow-clean, which runs on your computer: nothing leaves it), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland, plus xdotool for X11 programs under XWayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.6.0
What's new in 0.6.0
- Visualize (beta): say "visualize …" or "draw a flowchart of …" and get the diagram, drawn by a model on your computer (Qwen3.5, downloaded when you first use it) or by Claude Haiku 5.5 with your Anthropic API key. In a code editor, a terminal or a Markdown chat it pastes as Mermaid; elsewhere as a picture.
- Claude Haiku 5.5 cleanup with your API key: set it in Settings > Cleanup. localflow's own model cleans up when Claude can't be reached.
- Never a made-up word: when localflow's own cleanup model adds words you didn't say or drops part of what you said, you get the transcript as heard instead. Long dictations are no longer thrown away as asides.
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), localflow's own cleanup model, localflow-clean (it downloads too, and runs on your computer: nothing leaves it), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.5.0
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), localflow's own cleanup model, localflow-clean (it downloads too, and runs on your computer: nothing leaves it), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.4.1
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), localflow's own cleanup model, localflow-clean (it downloads too, and runs on your computer: nothing leaves it), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.4.0
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), localflow's own cleanup model, localflow-clean (it downloads too, and runs on your computer: nothing leaves it), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.3.0
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), where cleanup runs (on this computer with localflow's own small model, which it downloads while you go on, or with your API key), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.2.0
localflow, a native app written in Rust, with its own speech engine. The first time you open it, a short onboarding walks you through it: a speech model (it downloads while you go on), where cleanup runs (on this computer with Ollama, or with your API key), what macOS asks to allow, your keys on Linux, and a dictation you try right in the window.
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, the onboarding opens. The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. The onboarding then asks you to allow it under Accessibility (for the hotkey and pasting) and Microphone.
Linux: localflow-…-x86_64.AppImage. Make it executable (chmod +x) and run it: the onboarding opens, copies localflow to ~/.local/share/localflow/app, adds it to your app launcher, and shows the key bindings to add (Hyprland lines, with a Copy button). Needs PipeWire or ALSA for recording, and wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes. What you say to yourself or to someone else in the room is left out.
localflow 0.1.2
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, it sets up (on this computer or with your API key). The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. Then allow it under Accessibility (for the hotkey and pasting) and Microphone when macOS asks.
Linux: localflow-…-x86_64.AppImage. Needs a distro from 2023 or later (glibc 2.38+, which Handy's speech engine needs: Ubuntu 24.04, Fedora 39, Debian 13, Arch). Make it executable (chmod +x) and run it: setup opens, copies localflow to ~/.local/share/localflow/app and adds it to your app launcher, then shows the key bindings to add (Hyprland lines included). Needs PipeWire or ALSA for recording, wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting, and curl + zstd for local cleanup with Ollama.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes.
localflow 0.1.1
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, it sets up (on this computer or with your API key). The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. Then allow it under Accessibility (for the hotkey and pasting) and Microphone when macOS asks.
Linux: localflow-…-x86_64.AppImage. Needs a distro from 2023 or later (glibc 2.38+, which Handy's speech engine needs: Ubuntu 24.04, Fedora 39, Debian 13, Arch). Make it executable (chmod +x) and run it: setup opens, copies localflow to ~/.local/share/localflow/app and adds it to your app launcher, then shows the key bindings to add (Hyprland lines included). Needs PipeWire or ALSA for recording, wl-clipboard + wtype (Wayland) or xclip + xdotool (X11) for pasting, and curl + zstd for local cleanup with Ollama.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS, your key binding on Linux) and talk; let go and it pastes.
localflow 0.1.0
Windows: localflow-…-x64.msi. Open it, then open localflow from the Start menu: the first time, it sets up (on this computer or with your API key). The installer isn't signed yet: in the SmartScreen warning, click More info, then Run anyway.
macOS: …-arm64.dmg for Apple Silicon (M1 and later), …-x64.dmg for Intel. Open it, drag localflow into Applications, and open it from there. It isn't signed with an Apple Developer ID yet: the first time, macOS says it can't check it. Open System Settings > Privacy & Security and click Open Anyway next to localflow. Then allow it under Accessibility (for the hotkey and pasting) and Microphone when macOS asks.
Hold the hotkey (Ctrl+Shift+Space on Windows, Option+Shift+Space on macOS) and talk; let go and it pastes.